- 12 11月, 2014 14 次提交
-
-
由 Hannes Reinecke 提交于
fas216 returns DID_BAD_TARGET for an incomplete data transfer. The midlayer uses DID_BAD_TARGET to signal a non-existing or not reachable target. So we should rather be using DID_ERROR here. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
Update acornscsi to use scsi_print_command() instead of the underscore version and use scmd_printk() in acornscsi_done(). This will add correct device annotations in the resulting message. And we should be using set_host_byte() for setting the final result. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
We should be using the standard dev_printk() variants for sense code printing. [hch: remove __scsi_print_sense call in xen-scsiback, Acked by Juergen] [hch: folded bracing fix from Dan Carpenter] Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
Like scmd_printk(), but the device name is passed in as a string. Can be used by eg ULDs which do not have access to the scsi_cmnd structure. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
Remove all uncommented debugging code and move all printk() statements over to dev_printk(). And while we're at it we should be doing a whitespace cleanup, too. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
sd_done() was calling scsi_print_sense() for a sense code of 'NO_SENSE'. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Hannes Reinecke 提交于
Unused. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Markus Stockhausen 提交于
Some SES devices give non-unique Element Descriptors as part of the Element Descriptor diag page. Since we use these for creating sysfs entries, they need to be unique. The specification doesn't require these to be unique. Eg: $ sg_ses -p 7 /dev/sg0 FTS CORP TXS6_SAS20BPX12 0500 enclosure services device Element descriptor In diagnostic page: generation code: 0x0 element descriptor by type list Element type: Array device, subenclosure id: 0 Overall descriptor: ArrayDevicesInSubEnclsr0 Element 1 descriptor: ArrayDevice00 Element 2 descriptor: ArrayDevice01 Element 3 descriptor: ArrayDevice02 Element 4 descriptor: ArrayDevice03 Element 5 descriptor: ArrayDevice03 Element 6 descriptor: ArrayDevice03 Element 7 descriptor: ArrayDevice03 Element 8 descriptor: ArrayDevice03 Element 9 descriptor: ArrayDevice03 Element 10 descriptor: ArrayDevice03 Element 11 descriptor: ArrayDevice03 Element 12 descriptor: ArrayDevice03 Based on http://thread.gmane.org/gmane.linux.scsi/69289. This version implements James' ideas about the naming convention Signed-off-by: NMarkus Stockhausen <stockhausen@collogia.de> Acked-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Laurence Oberman 提交于
This patch adds a debug_flag parameter that can be set on module load, and allows the DEBUG facility without a module recompile. Note that now DEBUG 1 is the default with this patch. Usage: modprobe st debug_flag=1 Signed-off-by: NLaurence Oberman <loberman@redhat.com> Acked-by: NKai M??kisara <kai.makisara@kolumbus.fi> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Douglas Gilbert 提交于
Further to a January 2013 thread titled: "[PATCH] SG_SCSI_RESET ioctl should only perform requested operation" by Jeremy Linton a patch (v3) is presented that expands the existing ioctl to include "no_escalate" versions to the existing resets. This requires no changes to SCSI low level drivers (LLDs); it adds several more finely tuned reset options to the user space. For example: /* This call remains the same, with the same escalating semantics * if the device (LU) reset fail. That is: on failure to try a * target reset and if that fails, try a bus reset, and if that fails * try a host (i.e. LLD) reset. */ val = SG_SCSI_RESET_DEVICE; res = ioctl(<sg_or_block_fd>, SG_SCSI_RESET, &val); /* What follows is a new option introduced by this patch series. Only * a device reset is attempted. If that fails then an appropriate * error code is provided. N.B. There is no reset escalation. */ val = SG_SCSI_RESET_DEVICE | SG_SCSI_RESET_NO_ESCALATE; res = ioctl(<sg_or_block_fd>, SG_SCSI_RESET, &val); Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com> Reviewed-by: NJeremy Linton <jlinton@tributary.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
As sparse correctly pointed out, scsi_partsize should use get_unaligned_le32 to read PC partition tables from disk, as they are little endian. The result of this bug is that we returned incorrect geometries on big endian systems when using the scsicam variant. Which probably doesn't matter as only old x86 systems every cared about the geometry. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Reviewed-by: NHannes Reinecke <hare@suse.de>
-
由 Mark Rustad 提交于
Resolve some missing-field-initializers warnings by using designated initialization. [hch: W=2 with modern gcc warns about this. Pretty pointless to me, but I'd prefer to keep us warning free] Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Mark Knibbs 提交于
The Scsi_Host structure max_lun field is the maximum allowed LUN plus 1. So a LUN value is invalid if >= max_lun. Signed-off-by: NMark Knibbs <markk@clara.co.uk> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Mark Knibbs 提交于
Signed-off-by: NMark Knibbs <markk@clara.co.uk> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 10 11月, 2014 16 次提交
-
-
由 Maurizio Lombardi 提交于
bnx2fc_queuecommand(): when allocating a new io_req, the tgt_lock spinlock must be locked before calling bnx2fc_cmd_alloc(). The spinlock should also be kept locked until bnx2fc_post_io_req() has been completed. If not, a kernel thread may call bnx2fc_process_cq_compl() that extracts the newly allocated io_req from hba->cmd_mgr->cmds and destroys it while it is still being used by bnx2fc_post_io_req(). BUG: unable to handle kernel NULL pointer dereference at 000000000000004c IP: [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.3/net/eth3/type CPU 33 Modules linked in: autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc 8021q garp scsi_tgt stp llc cpufreq_ondemand freq_table pcc_cpufreq ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 power_meter microcode iTCO_wdt iTCO_vendor_support hpilo hpwdt sg bnx2x libcrc32c mdio serio_raw lpc_ich mfd_core shpchp ext4 jbd2 mbcache sd_mod crc_t10dif hpsa video output dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 7355, comm: bnx2fc_thread/3 Not tainted 2.6.32-431.el6.x86_64 #1 HP ProLiant BL460c Gen8 RIP: 0010:[<ffffffffa03130da>] [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP: 0018:ffff8820b0da3b68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff882003801080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff882003801100 RBP: ffff8820b0da3bc8 R08: ffffffff8160d4e8 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88400e600e00 R13: ffff8840108fbe40 R14: ffff88200ffe5400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8820b0da0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000004c CR3: 0000002010b67000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bnx2fc_thread/3 (pid: 7355, threadinfo ffff88401f940000, task ffff884012f5f540) Stack: ffff8820b0da3bc8 ffffffff81527303 ffff884000000020 ffff8820b0da3bd8 <d> ffff8820b0da3b98 000000028138931a ffff88400f506078 ffff88400e600e00 <d> ffff88200ffe5400 ffff88200ffe5590 0000000000000021 0000000000000002 Call Trace: <IRQ> [<ffffffff81527303>] ? printk+0x41/0x46 [<ffffffffa03169bc>] bnx2fc_post_io_req+0x11c/0x440 [bnx2fc] [<ffffffff812825b9>] ? cpumask_next_and+0x29/0x50 [<ffffffff8137ffd0>] ? scsi_done+0x0/0x60 [<ffffffffa0316df7>] bnx2fc_queuecommand+0x117/0x140 [bnx2fc] [<ffffffff81380245>] scsi_dispatch_cmd+0xe5/0x310 [<ffffffff81388b9e>] scsi_request_fn+0x5ee/0x7a0 [<ffffffff812658f1>] __blk_run_queue+0x31/0x40 [<ffffffff81265a40>] blk_run_queue+0x30/0x50 [<ffffffff81387da6>] scsi_run_queue+0xc6/0x270 [<ffffffff81260f92>] ? elv_requeue_request+0x52/0xa0 [<ffffffff813897a0>] scsi_requeue_command+0x90/0xb0 [<ffffffff81389b84>] scsi_io_completion+0x154/0x6c0 [<ffffffff8137ff62>] scsi_finish_command+0xc2/0x130 [<ffffffff8138a255>] scsi_softirq_done+0x145/0x170 [<ffffffff8126e865>] blk_done_softirq+0x85/0xa0 [<ffffffff8107a8e1>] __do_softirq+0xc1/0x1e0 [<ffffffff8100c30c>] ? call_softirq+0x1c/0x30 [<ffffffff8100c30c>] call_softirq+0x1c/0x30 <EOI> [<ffffffff8100fa75>] ? do_softirq+0x65/0xa0 [<ffffffff8107a40a>] local_bh_enable_ip+0x9a/0xb0 [<ffffffff8152a4eb>] _spin_unlock_bh+0x1b/0x20 [<ffffffffa0313937>] bnx2fc_process_cq_compl+0x257/0x2b0 [bnx2fc] [<ffffffffa03114ea>] bnx2fc_percpu_io_thread+0xea/0x160 [bnx2fc] [<ffffffffa0311400>] ? bnx2fc_percpu_io_thread+0x0/0x160 [bnx2fc] [<ffffffff8109aef6>] kthread+0x96/0xa0 [<ffffffff8100c20a>] child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Code: 89 df 45 8b 7e 30 0f 85 75 01 00 00 89 d1 31 c0 c1 e9 03 83 e2 04 89 c9 f3 48 ab 74 06 c7 07 00 00 00 00 49 89 9c 24 88 01 00 00 <83> 7e 4c 01 b8 01 00 00 00 0f 84 e7 00 00 00 89 c2 0a 53 38 41 RIP [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP <ffff8820b0da3b68> CR2: 000000000000004c Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com> Acked-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Jiang Liu 提交于
Function pci_enable_msix_range() may return negative values for error conditions. So it's a bug by checking (pci_enable_msix_range() != 0) for success and causes failure to megaraid driver when MSI is disabled. [ 16.487267] megaraid_sas 0000:02:00.0: Controller type: iMR [ 16.487275] genirq: Flags mismatch irq 0. 00000000 (megasas) vs. 00015a00 (tii mer) [ 16.487347] megasas: Failed to register IRQ for vector 0. Fixes: 8ae80ed1 "megaraid: Use pci_enable_msix_range() instead of pci_enable_msix()" Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Acked-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # 3.17
-
由 Anish Bhatt 提交于
Connection retries were not being cleaned up correctly if they failed as a result of link down. Applies on top of drivers-for-3.18. Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Anish Bhatt 提交于
Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
This patch fixes an issue with multipath ipr SAS devices which require a start unit command to be issued following an adapter reset. Without this patch, paths get marked failed following an adapter reset and since the error handler never gets invoked to issue the start unit, the paths are never recovered. Returning FAILED for this case ensures the error handler wakes up to issue the start unit. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Tested-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Multipath devices using the TUR path checker need to see the sense code for a failed TUR command in their device handler. Since commit 14216561 we always return success for mid layer issued TUR commands before calling the device handler, which stopped the TUR path checker from working. Move the call to the device handler check sense method before the early return for TUR commands to give the device handler a chance to intercept them. Signed-off-by: NChristoph Hellwig <hch@infradead.org> Tested-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: NHannes Reinecke <hare@suse.de>
-
由 Christoph Hellwig 提交于
Setups that use the blk-mq I/O path can lock up if a host with a single device that has its door locked enters EH. Make sure to only send the command to re-lock the door to devices that actually were reset and thus might have lost their state. Otherwise the EH code might be get blocked on blk_get_request as all requests for non-reset devices might be in use. Cc: stable@vger.kernel.org Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NMeelis Roos <meelis.roos@ut.ee> Tested-by: NMeelis Roos <meelis.roos@ut.ee> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - enable bpf syscall for compat - cpu_suspend fix when checking the idle state type - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: update defconfig for 3.18 arm64: compat: Enable bpf syscall arm64: psci: fix cpu_suspend to check idle state type for index
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another quiet week: - a fix to silence edma probe error on non-supported platforms from Arnd - a fix to enable the PL clock for Parallella, to make mainline usable with the SDK. - a somewhat verbose fix for the PLL clock tree on VF610 - enabling of SD/MMC on one of the VF610-based boards (for testing) - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and now needs to be added to the defconfig instead - another maintainer added for bcm2835: Lee Jones" * tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: zynq: Enable PL clocks for Parallella dma: edma: move device registration to platform code ARM: dts: vf610: add SD node to cosmic dts MAINTAINERS: update bcm2835 entry ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux由 Linus Torvalds 提交于
Pull devicetree bugfix from Grant Likely: "One buffer overflow bug that shouldn't be left around" * 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of: Fix overflow bug in string property parsing functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "It's a one liner for an error cleanup path that leads to crashes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 tiny fixes for 3.18-rc4. One fixes up a long-stading race condition in the driver core for removing directories in /sys/devices/virtual/ and the other 2 fix up the wording of a new Kconfig option that was added in 3.18-rc1" * tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP sysfs: driver core: Fix glue dir race condition by gdp_mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some staging/iio fixes for 3.18-rc4. Nothing major, just a few bugfixes of things that have been reported" * tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging:iio:ade7758: Remove "raw" from channel name staging:iio:ade7758: Fix check if channels are enabled in prenable staging:iio:ade7758: Fix NULL pointer deref when enabling buffer iio: as3935: allocate correct iio_device size io: accel: kxcjk-1013: Fix iio_event_spec direction iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some reported issues" * tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix pty master poll() after slave closes v2 serial: of-serial: fix uninitialized kmalloc variable tty/vt: don't set font mappings on vc not supporting this tty: serial: 8250_mtk: Fix quot calculation tty: Prevent "read/write wait queue active!" log flooding tty: Fix high cpu load if tty is unreleaseable serial: Fix divide-by-zero fault in uart_get_divisor()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes for 3.18-rc4. Just a bunch of little fixes resolving reported issues and new device ids for existing drivers. Full details are in the shortlog" * tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: Update default usb-storage delay_use value in kernel-parameters.txt USB: cdc-acm: add quirk for control-line state requests phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() USB: cdc-acm: only raise DTR on transitions from B0 Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" usb: core: notify disconnection when core detects disconnect usb: core: need to call usb_phy_notify_connect after device setup uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models xhci: no switching back on non-ULT Haswell USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen USB: quirks: enable device-qualifier quirk for another Elan touchscreen MAINTAINERS: Remove duplicate entry for usbip driver usb: storage: fix build warnings !CONFIG_PM usb: Remove references to non-existent PLAT_S5P symbol uas: Add NO_ATA_1X for VIA VL711 devices xhci: Disable streams on Asmedia 1042 xhci controllers USB: HWA: fix a warning message uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model usb-storage: handle a skipped data phase ...
-
- 09 11月, 2014 4 次提交
-
-
由 Andreas Färber 提交于
The Parallella board comes with a U-Boot bootloader that loads one of two predefined FPGA bitstreams before booting the kernel. Both define an AXI interface to the on-board Epiphany processor. Enable clocks FCLK0..FCLK3 for the Programmable Logic by default. Otherwise accessing, e.g., the ESYSRESET register freezes the board, as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem. Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "One bigger cleanup (FSF address removal) and two bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "Two fixlets for the armada SoC interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: armada-370-xp: Fix MPIC interrupt handling irqchip: armada-370-xp: Fix MSI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For: - some regression fixes at the Remote Controller core and imon driver - a build fix for certain randconfigs with ir-hix5hd2 - don't feed power to satellite system at ds3000 driver init It also contains some fixes for drivers added for Kernel 3.18: - some fixes at the new ISDB-S driver, and the corresponding bits to fix some descriptors for this Japanese TV standard at the DVB core - two warning cleanups for sp2 driver if PM is disabled - change the default mode for the new vivid driver" * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] sp2: sp2_init() can be static [media] dvb:tc90522: fix always-false expression [media] dvb-core: set default properties of ISDB-S [media] dvb:tc90522: fix stats report [media] vivid: default to single planar device instances [media] imon: fix other RC type protocol support [media] ir-hix5hd2 fix build warning [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding [media] rc-core: fix protocol_change regression in ir_raw_event_register
-
- 08 11月, 2014 6 次提交
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This weeks' round of MIPS bug fixes for 3.18: - wire up the bpf syscall - fix TLB dump output for R3000 class TLBs - fix strnlen_user return value if no NUL character was found. - fix build with binutils 2.24.51+. While there is no binutils 2.25 release yet, toolchains derived from binutils 2.24.51+ are already in common use. - the Octeon GPIO code forgot to offline GPIO IRQs. - fix build error for XLP. - fix possible BUG assertion with EVA for CMA" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix build with binutils 2.24.51+ MIPS: R3000: Fix debug output for Virtual page number MIPS: Fix strnlen_user() return value in case of overlong strings. MIPS: CMA: Do not reserve memory if not required MIPS: Wire up bpf syscall. MIPS/Xlp: Remove the dead function destroy_irq() to fix build error MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "This update fixes a warning in the new pagecache_isize_extended() and updates some related comments, another fix for zero-range misbehaviour, and an unforntuately large set of fixes for regressions in the bulkstat code. The bulkstat fixes are large but necessary. I wouldn't normally push such a rework for a -rcX update, but right now xfsdump can silently create incomplete dumps on 3.17 and it's possible that even xfsrestore won't notice that the dumps were incomplete. Hence we need to get this update into 3.17-stable kernels ASAP. In more detail, the refactoring work I committed in 3.17 has exposed a major hole in our QA coverage. With both xfsdump (the major user of bulkstat) and xfsrestore silently ignoring missing files in the dump/restore process, incomplete dumps were going unnoticed if they were being triggered. Many of the dump/restore filesets were so small that they didn't evenhave a chance of triggering the loop iteration bugs we introduced in 3.17, so we didn't exercise the code sufficiently, either. We have already taken steps to improve QA coverage in xfstests to avoid this happening again, and I've done a lot of manual verification of dump/restore on very large data sets (tens of millions of inodes) of the past week to verify this patch set results in bulkstat behaving the same way as it does on 3.16. Unfortunately, the fixes are not exactly simple - in tracking down the problem historic API warts were discovered (e.g xfsdump has been working around a 20 year old bug in the bulkstat API for the past 10 years) and so that complicated the process of diagnosing and fixing the problems. i.e. we had to fix bugs in the code as well as discover and re-introduce the userspace visible API bugs that we unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly. Summary: - incorrect warnings about i_mutex locking in pagecache_isize_extended() and updates comments to match expected locking - another zero-range bug fix for stray file size updates - a bunch of fixes for regression in the bulkstat code introduced in 3.17" * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() xfs: rework zero range to prevent invalid i_size updates mm: Remove false WARN_ON from pagecache_isize_extended() xfs: Check error during inode btree iteration in xfs_bulkstat() xfs: bulkstat doesn't release AGI buffer on error
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "More changes than I'd like here, most of them for a single bug repeated in a bunch of drivers with data not being initialized correctly, plus a fix to lower the severity of a warning introduced in the last merge window which can legitimately go off so we don't want to alarm users excessively" * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mpa01: zero-initialize regulator match table array regulator: max8660: zero-initialize regulator match table array regulator: max77802: zero-initialize regulator match table regulator: max77686: zero-initialize regulator match table regulator: max1586: zero-initialize regulator match table array regulator: max77693: Fix use of uninitialized regulator config regulator: of: Lower the severity of the error with no container
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi bugfixes from Mark Brown: "A couple of small driver fixes for v3.18, both quite problematic if you hit a use case that's affected" * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM spi: fsl-dspi: Fix CTAR selection
-
由 Johannes Berg 提交于
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aristeu Rozanski 提交于
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <josh@joshtriplett.org> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NAristeu Rozanski <arozansk@redhat.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-