Since the intel 6300esb platform uses a dedicated PCI ID for
it's watchdog timer (00:1d.4), it's better and easier to have
this as a pci_driver.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Before you can read or write from the i6300esb memeory mapped registers,
you need to unlock these. This is done by writing the magic numbers 0x80
and 0x86 to the reload register. The size of the reload register is 32bit
though.

Also binary 11 is hex 0x03 and not 0x11.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Making this instance static exposes the code to SMP races, etc.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Platform device drivers can use the .shutdown method to handle soft
shutdown's instead of reboot_notifier's.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

make the watchdog_info struct const where possible.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch corrects author and copyright notices  following the split-up of
the GE Fanuc joint venture.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

It's possible that the platform is not allowing reboot via TCO timer
expiration.

Also, differentiate between not finding a chipset that has TCO, and the case
where TCO is present but the driver fails to initialize for some reason.
Signed-off-by: NNaga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Clean-up driver:
* make release the reverse of probe so that both are consistent
* add WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS ioctls.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This driver adds support for the max63{69,70,71,72,73,74} family of
watchdog timer chips.

It has been tested on an Arcom Zeus (max6369).
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Technologic Systems TS-72xx SBCs have external glue logic
CPLD which includes watchdog timer. This driver implements
kernel support for that.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Fix per-cpu merge conflict
  failslab: add ability to filter slab caches
  slab: fix regression in touched logic
  dma kmalloc handling fixes
  slub: remove impossible condition
  slab: initialize unused alien cache entry as NULL at alloc_alien_cache().
  SLUB: Make slub statistics use this_cpu_inc
  SLUB: this_cpu: Remove slub kmem_cache fields
  SLUB: Get rid of dynamic DMA kmalloc cache allocation
  SLUB: Use this_cpu operations in slub

* 'nfs-for-2.6.34' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (44 commits)
  NFS: Remove requirement for inode->i_mutex from nfs_invalidate_mapping
  NFS: Clean up nfs_sync_mapping
  NFS: Simplify nfs_wb_page()
  NFS: Replace __nfs_write_mapping with sync_inode()
  NFS: Simplify nfs_wb_page_cancel()
  NFS: Ensure inode is always marked I_DIRTY_DATASYNC, if it has unstable pages
  NFS: Run COMMIT as an asynchronous RPC call when wbc->for_background is set
  NFS: Reduce the number of unnecessary COMMIT calls
  NFS: Add a count of the number of unstable writes carried by an inode
  NFS: Cleanup - move nfs_write_inode() into fs/nfs/write.c
  nfs41 fix NFS4ERR_CLID_INUSE for exchange id
  NFS: Fix an allocation-under-spinlock bug
  SUNRPC: Handle EINVAL error returns from the TCP connect operation
  NFSv4.1: Various fixes to the sequence flag error handling
  nfs4: renewd renew operations should take/put a client reference
  nfs41: renewd sequence operations should take/put client reference
  nfs: prevent backlogging of renewd requests
  nfs: kill renewd before clearing client minor version
  NFS: Make close(2) asynchronous when closing NFS O_DIRECT files
  NFS: Improve NFS iostat byte count accuracy for writes
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Add hardlink support to .u extension
  9P2010.L handshake: .L protocol negotiation
  9P2010.L handshake: Remove "dotu" variable
  9P2010.L handshake: Add mount option
  9P2010.L handshake: Add VFS flags
  net/9p: Handle mount errors correctly.
  net/9p: Remove MAX_9P_CHAN limit
  net/9p: Add multi channel support.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c

* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (145 commits)
  KVM: x86: Add KVM_CAP_X86_ROBUST_SINGLESTEP
  KVM: VMX: Update instruction length on intercepted BP
  KVM: Fix emulate_sys[call, enter, exit]()'s fault handling
  KVM: Fix segment descriptor loading
  KVM: Fix load_guest_segment_descriptor() to inject page fault
  KVM: x86 emulator: Forbid modifying CS segment register by mov instruction
  KVM: Convert kvm->requests_lock to raw_spinlock_t
  KVM: Convert i8254/i8259 locks to raw_spinlocks
  KVM: x86 emulator: disallow opcode 82 in 64-bit mode
  KVM: x86 emulator: code style cleanup
  KVM: Plan obsolescence of kernel allocated slots, paravirt mmu
  KVM: x86 emulator: Add LOCK prefix validity checking
  KVM: x86 emulator: Check CPL level during privilege instruction emulation
  KVM: x86 emulator: Fix popf emulation
  KVM: x86 emulator: Check IOPL level during io instruction emulation
  KVM: x86 emulator: fix memory access during x86 emulation
  KVM: x86 emulator: Add Virtual-8086 mode of emulation
  KVM: x86 emulator: Add group9 instruction decoding
  KVM: x86 emulator: Add group8 instruction decoding
  KVM: do not store wqh in irqfd
  ...

Trivial conflicts in Documentation/feature-removal-schedule.txt

For regular file and directories we put the link
count in th extension field in a tagged string format.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch adds 9P2010.L protocol negotiation with the server
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Removes 'dotu' variable and make everything dependent
on 'proto_version' field.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Add new mount V9FS mount option to specify protocol version

This patch adds a new mount option to specify protocol version.
With this option it is possible to use "-o version=" switch to
specify 9P protocol version to use. Valid options for version
are:
9p2000
9p2000.u
9p2010.L
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Add 9P2000.u and 9P2010.L protocol flags to V9FS VFS

This patch adds 9P2000.u and 9P2010.L protocol flags into V9FS VFS side code
and removes the single flag used for 'extended'.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

With this patch we have

# mount -t 9p -o trans=virtio virtio2 /mnt/
# mount -t 9p -o trans=virtio virtio2 /mnt/
mount: virtio2 already mounted or /mnt/ busy
mount: according to mtab, virtio2 is already mounted on /mnt
# mount -t 9p -o trans=virtio virtio3 /mnt/ -o debug=0xfff
mount: special device virtio3 does not exist
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Use a list to track the channel instead of statically
allocated array
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This is needed for supporting multiple mount points.

We can find out the device names to be used with mount by checking

/sys/devices/virtio-pci/virtio*/device file

if the device file have value 9 then the specific virtio device can
be used for mounting.

ex:
 #cat /sys/devices/virtio-pci/virtio1/device
 9

now we can mount using
# mount -t 9p -o trans=virtio virtio1  /mnt/
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove the redundant call to filemap_write_and_wait().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we have correct COMMIT semantics in writeback_single_inode, we can
reduce and simplify nfs_wb_all(). Also replace nfs_wb_nocommit() with a
call to filemap_write_and_wait(), which doesn't need to hold the
inode->i_mutex.

With that done, we can eliminate nfs_write_mapping() altogether.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In all cases we should be able to just remove the request and call
cancel_dirty_page().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since nfs_scan_list() doesn't wait for locked pages, we have a race in
which it is possible to end up with an inode that needs to send a COMMIT,
but which does not have the I_DIRTY_DATASYNC flag set.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>

If the caller is doing a non-blocking flush, and there are still writebacks
pending on the wire, we can usually defer the COMMIT call until those
writes are done.

Also ensure that we honour the wbc->nonblocking flag.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In order to know when we should do opportunistic commits of the unstable
writes, when the VM is doing a background flush, we add a field to count
the number of unstable writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sole purpose of nfs_write_inode is to commit unstable writes, so
move it into fs/nfs/write.c, and make nfs_commit_inode static.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'write_inode2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  pass writeback_control to ->write_inode
  make sure data is on disk before calling ->write_inode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Switch !O_CREAT case to use of do_last()
  Get rid of symlink body copying
  Finish pulling of -ESTALE handling to upper level in do_filp_open()
  Turn do_link spaghetty into a normal loop
  Unify exits in O_CREAT handling
  Kill is_link argument of do_last()
  Pull handling of LAST_BIND into do_last(), clean up ok: part in do_filp_open()
  Leave mangled flag only for setting nd.intent.open.flag
  Get rid of passing mangled flag to do_last()
  Don't pass mangled open_flag to finish_open()
  pull more into do_last()
  bail out with ELOOP earlier in do_link loop
  pull the common predecessors into do_last()
  postpone __putname() until after do_last()
  unroll do_last: loop in do_filp_open()
  Shift releasing nd->root from do_last() to its caller
  gut do_filp_open() a bit more (do_last separation)
  beginning to untangle do_filp_open()

Fix missing kernel-doc notation in mtrr/main.c:

Warning(arch/x86/kernel/cpu/mtrr/main.c:152): No description found for parameter 'info'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Issue at least one memory barrier in stop_machine_text_poke()
  perf probe: Correct probe syntax on command line help
  perf probe: Add lazy line matching support
  perf probe: Show more lines after last line
  perf probe: Check function address range strictly in line finder
  perf probe: Use libdw callback routines
  perf probe: Use elfutils-libdw for analyzing debuginfo
  perf probe: Rename probe finder functions
  perf probe: Fix bugs in line range finder
  perf probe: Update perf probe document
  perf probe: Do not show --line option without dwarf support
  kprobes: Add documents of jump optimization
  kprobes/x86: Support kprobes jump optimization on x86
  x86: Add text_poke_smp for SMP cross modifying code
  kprobes/x86: Cleanup save/restore registers
  kprobes/x86: Boost probes when reentering
  kprobes: Jump optimization sysctl interface
  kprobes: Introduce kprobes jump optimization
  kprobes: Introduce generic insn_slot framework
  kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  padata: Allocate the cpumask for the padata instance
  crypto: authenc - Move saved IV in front of the ablkcipher request
  crypto: hash - Fix handling of unaligned buffers
  crypto: authenc - Use correct ahash complete functions
  crypto: md5 - Set statesize