maybe typo?
Signed-off-by: NHideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobject_add() and kobject_del() don't emit hotplug events anymore.
We need to do it ourselves now.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: fix AIPTEK input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)

PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
REASON: `dev` - field not filled...
SOLUTION: in linux/drivers/usb/input/aiptek.c write
	aiptek->inputdev.dev = &intf->dev;
before calling
	input_register_device(&aiptek->inputdev);

From: "Viktor A. Danilov" <__die@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/input/aiptek.c
===================================================================

Updates to the Ethernet/RNDIS gadget driver (mostly for RNDIS):

  - Fix brown-paper bag goof with RNDIS packet TX ... the wrong length
    field got set, so Windows would ignore data packets it received.

  - More consistent handling of CDC output filters (but not yet hooking
    things up so RNDIS uses the mechanism).

  - Zerocopy RX for RNDIS packets too (saving CPU cycles).

  - Use the pre-allocated interrupt/status request and buffer, rather
    than allocating and freeing one of each every few seconds (which
    could fail).

  - Some more "sparse" tweaks, making both dual-speed and single-speed
    configurations happier.

  - RNDIS speeds are reported in units of 100bps, not bps.

Plus two minor cleanups (whitespace, messaging).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*,
there's no need to check a pointer for NULL before calling kfree() on it.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/class/audio.c
===================================================================

Checking for NULL before calling kfree() is redundant. This patch removes
these redundant checks and also makes a few tiny whitespace changes.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Please accept the attached patch which adds the vendorid 0x0745 and
modelid 0x0001 (ID 0745:0001) "Syntech Information Co., Ltd."

The device is an USB IR cradle for a barcode scanner (CPT-8001C) from
Cipherlab.


From: Peter Favrholdt <pfavr@mip.sdu.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -u kernel-source-2.6.11/drivers/usb/serial/pl2303.c ../kernel-source-2.6.11/drivers/usb/serial/pl2303.c

I'm attaching a patch to fix status when using Siemens X65
mobile. This mobile use first byte instead of normal UART_STATE
byte.


From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/serial/pl2303.c
===================================================================

It's possible to unplug usb device and do tiocmset() and tiocmget() without
valid interface in pl2303 module.

The patch below check this and return -ENODEV if interface was removed.

From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -purN linux-05-04-11/drivers/usb/serial/pl2303.c linux-05-04-11.usb/drivers/usb/serial/pl2303.c

In response to complaints about excessive latency in the uhci-hcd driver
I'm planning to convert it to a top-half/bottom-half design.  It turns out
that to do this, the USB API has to be modified slightly since the driver
will not be able to meet one of the guarantees in the current API.  This
patch changes some kerneldoc, specifying the weaker guarantee.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a quirk to the OHCI driver that lets it work with an old
Compaq implementation.  It also removes some needless strings from
the non-debug version of the driver.
Signed-off-by: NChris Clayton <chris_clayton@f1internet.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Hmm, another case of a Zaurus ROM not telling the expected conformance lie;
this patch handles the lies told by the SL5600.

From: bender647@gmail.com
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the attached patch adds another USB device ID to the list. Seems the
device is known under multiple IDs.
Signed-off-by: NThomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/storage/unusual_devs.h
===================================================================

This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125.
Some delays need this extra delay includign Jan De Luyck's drive which spawned
the original increase from 110 to 110us. 125 is a microframe, so this delay
seems to make sense more than just be a random delay (thanks to David Brownell
for pointing that out after my original patch).
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/storage/transport.c
===================================================================

On ppc64:

drivers/usb/net/usbnet.c: In function `skb_return':
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/net/usbnet.c~usbnet-printk-warning-fix drivers/usb/net/usbnet.c

I am sorry that the last patch about 32 bit compat ioctl on
64 bit kernel actually breaks the usbdevfs. That is on the current
BK tree. I am retarded. 

Here is the patch to fix it. Tested with USB hard disk and webcam
in both 32bit compatible mode and native 64bit mode.

Again, sorry about that.


From: Christopher Li <chrisl@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts a recent change to usb_set_interface().  The change worked
around a quirk in certain devices, but doing this in usbcore creates
needless regressions for other devices.  More appropriate fixes won't
put such handling in usbcore.

Basically it's tricky to do a full software reset of USB device state, since
the devices don't all act the same.  This adds a note to the kerneldoc for
the usb_reset_configuration() call to highlight the quirk this was working
around:  endpoint data toggles not being reset.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

First patch incorrectly changed state of the wait-queue usage to
TASK_UNINTERRUPTIBLE. Reverted to TASK_INTERRUPTIBLE.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/core/usb.h
===================================================================

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch includes minor "sparse -Wbitwise" updates for the PCI based
HCDs.  Almost all of them involve just changing the second parameter of the
suspend() method to a pm_message_t ...  the others relate to how the EHCI
code walks in-memory data structures.  (There's a minor bug fixed there too
...  affecting the big-endian sysfs async schedule dump.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/core/hcd.h
===================================================================

This is the first of a few installments of PM API updates to match the
recent switch to "pm_message_t".  This installment primarily affects
USB device drivers (for USB interfaces), and it changes the handful of
drivers which currently implement suspend methods:

    - <linux/usb.h> and usbcore, signature change

    - Some drivers only changed the signature, net effect this just
      shuts up "sparse -Wbitwise":
	* hid-core
	* stir4200

    - Two network drivers did that, and also grew slightly more
      featureful suspend code ... they now properly shut down
      their activities.  (As should stir4200...)
	* pegasus
	* usbnet

Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks
to me like it's missing a request to turn it on, vs just configuring it.
The ASIX code in usbnet also has WOL hooks that are ready to use; untested.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/net/irda/stir4200.c
===================================================================

This has a variety of updates to the shared suspend/resume code for
PCI based USB host controllers.

    - Cope with pm_message_t replacing the target system state.
      This is actually a loss of functionality; PCI D1 and D2
      states will no longer be used, and it's no longer knowable
      that D3cold is on the way so power will be lost.

    - Most importantly, some of the resume paths are reworked and
      cleaned up.  They're now an exact mirror of suspend paths,
      and more care is taken to ensure the hardware is reactivated
      before the hardware re-enables interrupts.

Plus comment and diagnostic cleanups; there are some nasty cases here 
especially combined with swsusp, now they're somewhat commented.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/core/hcd-pci.c~usb-resume-fixes drivers/usb/core/hcd-pci.c

Here's a tiny patch to add support for the Tapwave Zodiac (for
2.6.11.6).  I've been meaning to send it in for a while but kept
upgrading my kernel and losing the changes :-)  I own the device and it
works fine with the latest pilot-link beta.

From: Larry Battraw <lbattraw@insightbb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Thanks to Jamieson Becker <jamie@jamiebecker.com> for the info
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -Naur -X dontdiff-osdl tmp/linux-2.6.12-rc2/drivers/usb/serial/visor.h linux-2.6/drivers/usb/serial/visor.h

Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!