Use *cpus_addr() to display the mask of pending/to be called CPUs.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Track the idle thread task_struct for each CPU.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

fb1c8f93 broke the ARM rwlock code since
it only partially updated the rwlock implementation.  Properly update it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

3016/1 changed the map_desc structure to take a PFN instead of a
physical address.  Fixup Realview machine support for this change.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It seems that without the extra tlb flush, we may end up faulting
during the early kernel initialisation because the TLB can't see
the updated page tables.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3083/1: include/asm-arm/arch-ixp4xx/io.h: eliminate warnings for pointer passed to integral function argument

Patch from John Bowler

Fix for a compiler warning, this wasn't apparent in 2.6.12, I
believe the compiler options have been changed (somewhere) so
that passing a (void*) to a (u32) argument is now warned.

This accounts for the majority of the warnings in my builds of
the 2.6.14 kernel for NSLU2.

The patch changes pointer parameters declared as u32 to be
declared as either, for read parameters:

const volatile void __iomem *

and for write parameters:

volatile void __iomem *
Signed-off-by: NJohn Bowler <jbowler@acm.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Realview was missed in this cleanup...
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

cfq's add_req_fn callback may invoke q->request_fn directly and
depending on low-level driver used and timing, a queued request may be
finished & deallocated before add_req_fn callback returns.  So,
__elv_add_request must not access rq after it's passed to add_req_fn
callback.

This patch moves rq_mergeable test above add_req_fn().  This may
result in q->last_merge pointing to REQ_NOMERGE request if add_req_fn
callback sets it but as RQ_NOMERGE is checked again when blk layer
actually tries to merge requests, this does not cause any problem.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a panic in the current tree caused by a race condition between the initial replenish cycle and the rx processing of the first packets trying to replenish the buffers.
Signed-off-by: NSantiago Leon <santil@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Manual fixups for some clashes due to re-indenting.

drivers/char/tlclk.c: In function `tlclk_init':
drivers/char/tlclk.c:775: warning: implicit declaration of function `platform_device_register_simple'
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This section of code calls .audit_syscal_exit, but is inside CONFIG_AUDIT,
so it will fail to build if CONFIG_AUDITSYSCALL is not defined.

After discussion with David Woodhouse, change the ifdef to
CONFIG_AUDITSYSCALL
Signed-off-by: NHorms <horms@verge.net.au>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  CC      drivers/char/tpm/tpm_nsc.o
drivers/char/tpm/tpm_nsc.c:277: error: `platform_bus_type' undeclared here (not in a function)
...
  CC      drivers/char/tpm/tpm_atmel.o
drivers/char/tpm/tpm_atmel.c:175: error: `platform_bus_type' undeclared here (not in a function)

Make sure to include proper headers.
Signed-off-by: NChris Wright <chrisw@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add reset/reboot code to support the ColdFire 5208 family.
Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the UARTs on the ColdFire 5208 family.
Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The PIT timer in the 5208 ColdFire has slightly different interrupt
bit definitions than the PIT timer used on other ColdFire parts.
Define the commonly used bit and mask numbers here, and let
part specific defines take precedence if they are defined.

Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the PIT timer used in the 5208 ColdFire fmaily.
Patch originally from Matt Wadell (from code originally modified by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use board name defines to distinguish boards, instead of combinations
of more generic defines.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the cpu cache of the 5208 ColdFire fmaily.
Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the internal register map of the 5208 ColdFire fmaily.
Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Define the register space of the new 5208 ColdFire family (which includes
to 5207). It is mostly similar to the other ColdFire parts.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use board name define to differentiate boards, not combination
of more generic defines.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updated m68knommu defconfig. Part of changing the "Motorola" names
to their new name "Freescale".
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unmaintained asm-m68knommu/ide.h. It is completely out of
date - and there is no underlying support for it.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove auto-generated file from source base.
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

"extern inline" doesn't make much sense here.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I don't really understand why gcc gives the error it does, but without
this patch, when building with CONFIG_HOTPLUG=n, I get errors like:

      CC      arch/x86_64/pci/../../i386/pci/fixup.o
    arch/x86_64/pci/../../i386/pci/fixup.c: In function `pci_fixup_i450nx':
    arch/x86_64/pci/../../i386/pci/fixup.c:13: error: pci_fixup_i450nx causes a section type conflict

The change is obviously correct: an array should be declared
__devinitdata rather that __devinit.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NMartin J. Bligh <mbligh@mbligh.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Deepak Saxena

CONFIG_MACH_GTWX5715 hardcodes the machine type in head-xscale.S so we
can no longer boot on any other machine types. The proper fix would be
to remove the hardcoding, but that machine is an off-the-shelf system
and most users won't have access to the bootloader. :(
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Dan Williams

* If request_irq fails then a call to release_mem_region will be made with an invalid pointer.
* Two formatting fixes
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch adds a microcode loader for the ixp2000 architecture.

The ixp2000 is an xscale-based CPU with a number of additional small
CPUs ('microengines') on die that can be programmed to do various
things.  Depending on the ixp2000 model, there are between 2 and 16
microengines.

This code provides an API that allows configuring the microengines,
loading code into them, and starting and stopping them and reading
out a number of status registers, and is used by the microengine
network driver that was recently announced to netdev.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

This patch provides a preemption safe implementation of copy_to_user
and copy_from_user based on the copy template also used for memcpy.
It is enabled unconditionally when CONFIG_PREEMPT=y.  Otherwise if the
configured architecture is not ARMv3 then it is enabled as well as it
gives better performances at least on StrongARM and XScale cores.  If
ARMv3 is not too affected or if it doesn't matter too much then
uaccess.S could be removed altogether.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

This patch provides a new implementation for optimized memory copy
functions on ARM.  It is made of two levels: a template that consists of
the core copy code and separate files that define macros to be used with
the core code depending on the type of copy needed. This allows for best
performances while sharing the same core for implementing memcpy(),
copy_from_user() and copy_to_user() for instance.

Two reasons for this work:

1) the current copy_to_user/copy_from_user implementation assumes no
   task switch will ever occur in the middle of each copied page making
   it completely unsafe with CONFIG_PREEMPT=y.

2) current copy implementations are measurably suboptimal and optimizing
   different implementations separately is a pain and more opportunities
   for bugs.

The reason for (1) is the fact that copy inside user pages are performed
with the ldm instruction which has no mean for testing user protections
and could possibly race with process preemption bypassing the COW mechanism
for example.  This is a longstanding issue that we said ought to be fixed
for about two years now.  The solution is to substitute those ldm insns
with a series of ldrt or strt insns to enforce user memory protection.
At least on StrongARM and XScale cores the ldm is not faster than the
equivalent ldr/str insns with a warm i-cache so there is no measurable
performance degradation with that change. The fact that the copy code is
a template makes it pretty easy to reuse the same core code as for memcpy
and benefit from the same performance optimizations.

Now (2) is best demonstrated with actual throughput measurements.
First, here is a summary of memcopy tests performed on a StrongARM core:

	PTR alignment	buffer size	kernel version	this version
	------------------------------------------------------------
	  aligned	     32		 59.73		107.43
	unaligned	     32		 61.31		 74.72
	  aligned	    100		132.47		136.15
	unaligned	    100	    	103.84		123.76
	  aligned	   4096		130.67		130.80
	unaligned	   4096	    	130.68		130.64
	  aligned	1048576		 68.03		68.18
	unaligned	1048576		 68.03		68.18

The buffer size is in bytes and the measured speed in MB/s.  The copy
was performed repeatedly with given buffer and throughput averaged over
3 seconds.

Here we can see that the current kernel version has a higher entry cost
that shows up with small buffers.  As buffer size grows both implementation
converge to the same throughput.

Now here's the exact same test performed on an XScale core (PXA255):

	PTR alignment	buffer size	kernel version	this version
	------------------------------------------------------------
	  aligned	     32		 46.99		 77.58
	unaligned	     32		 53.61		 59.59
	  aligned	    100		107.19		136.59
	unaligned	    100		 83.61		 97.58
	  aligned	   4096		129.13		129.98
	unaligned	   4096		128.36		128.53
	  aligned	1048576		 53.76		 59.41
	unaligned	1048576		 33.67		 56.96

Again we can see the entry setup cost being higher for the current kernel
before getting to the main copy loop.  Then throughput results converge
as long as the buffer remains in the cache. Then the 1MB case shows more
differences probably due to better pld placement and/or less instruction
interlocks in this proposed implementation.

Disclaimer: The PXA system was running with slower clocks than the
StrongARM system so trying to infer any conclusion by comparing those
separate sets of results side by side would be completely inappropriate.

So...  What this patch does is to replace both memcpy and memmove with
an implementation based on the provided copy code template.  The memmove
code is kept separate since it is used only if the memory areas involved
do overlap in which case the code is a transposition of the template but
with the copy occurring in the opposite direction (trying to fit that
mode into the template turned it into a mess not worth it for memmove
alone).  And obviously both memcpy and memmove were tested with all kinds
of pointer alignments and buffer sizes to exercise all code paths for
correctness.

The next patch will provide the now trivial replacement implementation
copy_to_user and copy_from_user.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Required for future enhancement patches.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>