Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 24 12月, 2015 1 次提交
  3. 03 11月, 2015 1 次提交
  5. 26 10月, 2015 1 次提交
    • S
      tracepoint: Give priority to probes of tracepoints · 7904b5c4
      由 Steven Rostedt (Red Hat) 提交于 
      In order to guarantee that a probe will be called before other probes that
are attached to a tracepoint, there needs to be a mechanism to provide
priority of one probe over the others.

Adding a prio field to the struct tracepoint_func, which lets the probes be
sorted by the priority set in the structure. If no priority is specified,
then a priority of 10 is given (this is a macro, and perhaps may be changed
in the future).

Now probes may be added to affect other probes that are attached to a
tracepoint with a guaranteed order.

One use case would be to allow tracing of tracepoints be able to filter by
pid. A special (higher priority probe) may be added to the sched_switch
tracepoint and set the necessary flags of the other tracepoints to notify
them if they should be traced or not. In case a tracepoint is enabled at the
sched_switch tracepoint too, the order of the two are not random.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      7904b5c4
  7. 21 10月, 2015 1 次提交
  9. 08 4月, 2015 1 次提交
    • S
      tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values · 0c564a53
      由 Steven Rostedt (Red Hat) 提交于 
      Several tracepoints use the helper functions __print_symbolic() or
__print_flags() and pass in enums that do the mapping between the
binary data stored and the value to print. This works well for reading
the ASCII trace files, but when the data is read via userspace tools
such as perf and trace-cmd, the conversion of the binary value to a
human string format is lost if an enum is used, as userspace does not
have access to what the ENUM is.

For example, the tracepoint trace_tlb_flush() has:

 __print_symbolic(REC->reason,
    { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
    { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
    { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
    { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

Which maps the enum values to the strings they represent. But perf and
trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would
not be able to map it.

With TRACE_DEFINE_ENUM(), developers can place these in the event header
files and ftrace will convert the enums to their values:

By adding:

 TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
 TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

 $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format
[...]
 __print_symbolic(REC->reason,
    { 0, "flush on task switch" },
    { 1, "remote shootdown" },
    { 2, "local shootdown" },
    { 3, "local mm shootdown" })

The above is what userspace expects to see, and tools do not need to
be modified to parse them.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Guilherme Cox <cox@computer.org>
Cc: Tony Luck <tony.luck@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0c564a53
  11. 08 2月, 2015 1 次提交
  13. 10 9月, 2014 1 次提交
  15. 08 8月, 2014 1 次提交
  17. 08 5月, 2014 1 次提交
    • S
      tracing: Add trace_<tracepoint>_enabled() function · 7c65bbc7
      由 Steven Rostedt (Red Hat) 提交于 
      There are some code paths in the kernel that need to do some preparations
before it calls a tracepoint. As that code is worthless overhead when
the tracepoint is not enabled, it would be prudent to have that code
only run when the tracepoint is active. To accomplish this, all tracepoints
now get a static inline function called "trace_<tracepoint-name>_enabled()"
which returns true when the tracepoint is enabled and false otherwise.

As an added bonus, that function uses the static_key of the tracepoint
such that no branch is needed.

  if (trace_mytracepoint_enabled()) {
	arg = process_tp_arg();
	trace_mytracepoint(arg);
  }

Will keep the "process_tp_arg()" (which may be expensive to run) from
being executed when the tracepoint isn't enabled.

It's best to encapsulate the tracepoint itself in the if statement
just to keep races. For example, if you had:

  if (trace_mytracepoint_enabled())
	arg = process_tp_arg();
  trace_mytracepoint(arg);

There's a chance that the tracepoint could be enabled just after the
if statement, and arg will be undefined when calling the tracepoint.

Link: http://lkml.kernel.org/r/20140506094407.507b6435@gandalf.local.homeAcked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      7c65bbc7
  19. 09 4月, 2014 3 次提交
  21. 22 3月, 2014 1 次提交
  23. 04 3月, 2014 1 次提交
  25. 02 12月, 2013 1 次提交
  27. 19 11月, 2013 1 次提交
  29. 21 6月, 2013 1 次提交
    • S
      tracing: Add DEFINE_EVENT_FN() macro · f5abaa1b
      由 Steven Rostedt 提交于 
      Each TRACE_EVENT() adds several helper functions. If two or more trace events
share the same structure and print format, they can also share most of these
helper functions and save a lot of space from duplicate code. This is why the
DECLARE_EVENT_CLASS() and DEFINE_EVENT() were created.

Some events require a trigger to be called at registering and unregistering of
the event and to do so they use TRACE_EVENT_FN().

If multiple events require a trigger, they currently have no choice but to use
TRACE_EVENT_FN() as there's no DEFINE_EVENT_FN() available. This unfortunately
causes a lot of wasted duplicate code created.

By adding a DEFINE_EVENT_FN(), these events can still use a
DECLARE_EVENT_CLASS() and then define their own triggers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/51C3236C.8030508@hds.comSigned-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      f5abaa1b
  31. 11 6月, 2013 1 次提交
    • P
      trace: Allow idle-safe tracepoints to be called from irq · d6284099
      由 Paul E. McKenney 提交于 
      __DECLARE_TRACE_RCU() currently creates an _rcuidle() tracepoint which
may safely be invoked from what RCU considers to be an idle CPU.
However, these _rcuidle() tracepoints may -not- be invoked from the
handler of an irq taken from idle, because rcu_idle_enter() zeroes
RCU's nesting-level counter, so that the rcu_irq_exit() returning to
idle will trigger a WARN_ON_ONCE().

This commit therefore substitutes rcu_irq_enter() for rcu_idle_exit()
and rcu_irq_exit() for rcu_idle_enter() in order to make the _rcuidle()
tracepoints usable from irq handlers as well as from process context.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
      d6284099
  33. 12 9月, 2012 1 次提交
  35. 06 7月, 2012 1 次提交
  37. 24 2月, 2012 1 次提交
    • I
      static keys: Introduce 'struct static_key', static_key_true()/false() and... · c5905afb
      由 Ingo Molnar 提交于 
      static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]()

So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.

Typical usage scenarios:

        #include <linux/static_key.h>

        struct static_key key = STATIC_KEY_INIT_TRUE;

        if (static_key_false(&key))
                do unlikely code
        else
                do likely code

Or:

        if (static_key_true(&key))
                do likely code
        else
                do unlikely code

The static key is modified via:

        static_key_slow_inc(&key);
        ...
        static_key_slow_dec(&key);

The 'slow' prefix makes it abundantly clear that this is an
expensive operation.

I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.

On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.huSigned-off-by: NIngo Molnar <mingo@elte.hu>
      c5905afb
  39. 13 2月, 2012 1 次提交
    • S
      tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections · 2fbb90db
      由 Steven Rostedt 提交于 
      Added is a new static inline function that lets *any* tracepoint be used
inside a rcu_idle_exit() section. And this also solves the problem where
the same tracepoint may be used inside a rcu_idle_exit() section as well
as outside of one.

I added a new tracepoint function with a "_rcuidle" extension. All
tracepoints can be used with either the normal "trace_foobar()"
function, or the "trace_foobar_rcuidle()" function when inside a
rcu_idle_exit() section.

All tracepoints defined by TRACE_EVENT() or any of the derivatives
will have a "_rcuidle()" function also defined. When a tracepoint is
used within an rcu_idle_exit() section, the "_rcuidle()" version must
be used. This denotes that the tracepoint is within rcu_idle_exit()
and it allows the rcu read locks within the tracepoint to still
be valid, as this version takes us out of rcu_idle_exit().

Another nice aspect about this patch is that "static inline"s are not
compiled into text when not used. So only the tracepoints that actually
use the _rcuidle() version will have them defined in the actual text
that is booted.

Link: http://lkml.kernel.org/r/1328563113.2200.39.camel@gandalf.stny.rr.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      2fbb90db
  41. 11 8月, 2011 1 次提交
    • M
      Tracepoint: Dissociate from module mutex · b75ef8b4
      由 Mathieu Desnoyers 提交于 
      Copy the information needed from struct module into a local module list
held within tracepoint.c from within the module coming/going notifier.

This vastly simplifies locking of tracepoint registration /
unregistration, because we don't have to take the module mutex to
register and unregister tracepoints anymore. Steven Rostedt ran into
dependency problems related to modules mutex vs kprobes mutex vs ftrace
mutex vs tracepoint mutex that seems to be hard to fix without removing
this dependency between tracepoint and module mutex. (note: it should be
investigated whether kprobes could benefit of being dissociated from the
modules mutex too.)

This also fixes module handling of tracepoint list iterators, because it
was expecting the list to be sorted by pointer address. Given we have
control on our own list now, it's OK to sort this list which has
tracepoints as its only purpose. The reason why this sorting is required
is to handle the fact that seq files (and any read() operation from
user-space) cannot hold the tracepoint mutex across multiple calls, so
list entries may vanish between calls. With sorting, the tracepoint
iterator becomes usable even if the list don't contain the exact item
pointed to by the iterator anymore.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NJason Baron <jbaron@redhat.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20110810191839.GC8525@KrystalSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>
      b75ef8b4
  43. 05 4月, 2011 1 次提交
    • J
      jump label: Introduce static_branch() interface · d430d3d7
      由 Jason Baron 提交于 
      Introduce:

static __always_inline bool static_branch(struct jump_label_key *key);

instead of the old JUMP_LABEL(key, label) macro.

In this way, jump labels become really easy to use:

Define:

        struct jump_label_key jump_key;

Can be used as:

        if (static_branch(&jump_key))
                do unlikely code

enable/disale via:

        jump_label_inc(&jump_key);
        jump_label_dec(&jump_key);

that's it!

For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.

Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.

Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.

Testing:

I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.

jump label configured in
avg: 815.6

jump label *not* configured in (using atomic reads)
avg: 800.1

jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Suggested-by: NH. Peter Anvin <hpa@linux.intel.com>
Tested-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      d430d3d7
  45. 03 2月, 2011 1 次提交
    • M
      tracepoints: Fix section alignment using pointer array · 65498646
      由 Mathieu Desnoyers 提交于 
      Make the tracepoints more robust, making them solid enough to handle compiler
changes by not relying on anything based on compiler-specific behavior with
respect to structure alignment. Implement an approach proposed by David Miller:
use an array of const pointers to refer to the individual structures, and export
this pointer array through the linker script rather than the structures per se.
It will consume 32 extra bytes per tracepoint (24 for structure padding and 8
for the pointers), but are less likely to break due to compiler changes.

History:

commit 7e066fb8 tracepoints: add DECLARE_TRACE() and DEFINE_TRACE()
added the aligned(32) type and variable attribute to the tracepoint structures
to deal with gcc happily aligning statically defined structures on 32-byte
multiples.

One attempt was to use a 8-byte alignment for tracepoint structures by applying
both the variable and type attribute to tracepoint structures definitions and
declarations. It worked fine with gcc 4.5.1, but broke with gcc 4.4.4 and 4.4.5.

The reason is that the "aligned" attribute only specify the _minimum_ alignment
for a structure, leaving both the compiler and the linker free to align on
larger multiples. Because tracepoint.c expects the structures to be placed as an
array within each section, up-alignment cause NULL-pointer exceptions due to the
extra unexpected padding.

(this patch applies on top of -tip)
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
LKML-Reference: <20110126222622.GA10794@Krystal>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      65498646
  47. 08 1月, 2011 2 次提交
  49. 03 12月, 2010 1 次提交
    • S
      tracing: Add TRACE_EVENT_CONDITIONAL() · 287050d3
      由 Steven Rostedt 提交于 
      There are instances in the kernel that we only want to trace
a tracepoint when a certain condition is set. But we do not
want to test for that condition in the core kernel.
If we test for that condition before calling the tracepoin, then
we will be performing that test even when tracing is not enabled.
This is 99.99% of the time.

We currently can just filter out on that condition, but that happens
after we write to the trace buffer. We just wasted time writing to
the ring buffer for an event we never cared about.

This patch adds:

   TRACE_EVENT_CONDITION() and DEFINE_EVENT_CONDITION()

These have a new TP_CONDITION() argument that comes right after
the TP_ARGS().  This condition can use the parameters of TP_ARGS()
in the TRACE_EVENT() to determine if the tracepoint should be traced
or not. The TP_CONDITION() will be placed in a if (cond) trace;

For example, for the tracepoint sched_wakeup, it is useless to
trace a wakeup event where the caller never actually wakes
anything up (where success == 0). So adding:

	TP_CONDITION(success),

which uses the "success" parameter of the wakeup tracepoint
will have it only trace when we have successfully woken up a
task.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      287050d3
  51. 18 11月, 2010 1 次提交
    • F
      tracing: New macro to set up initial event flags value · 1ed0c597
      由 Frederic Weisbecker 提交于 
      This introduces the new TRACE_EVENT_FLAGS() macro in order
to set up initial event flags value.

This macro must simply follow the definition of a trace event
and take the event name and the flag value as parameters:

TRACE_EVENT(my_event, .....
....
);

TRACE_EVENT_FLAGS(my_event, 1)

This will set up 1 as the initial my_event->flags value.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
      1ed0c597
  53. 23 9月, 2010 1 次提交
  55. 22 6月, 2010 1 次提交
  57. 14 5月, 2010 2 次提交
    • S
      tracing: Let tracepoints have data passed to tracepoint callbacks · 38516ab5
      由 Steven Rostedt 提交于 
      This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      38516ab5
    • M
      tracepoints: Add check trace callback type · 53da59aa
      由 Mathieu Desnoyers 提交于 
      This check is meant to be used by tracepoint users which do a direct cast of
callbacks to (void *) for direct registration, thus bypassing the
register_trace_##name and unregister_trace_##name checks.

This permits to ensure that the callback type matches the function type at the
call site, but without generating any code.
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100430165959.GA25605@Krystal>
CC: Ingo Molnar <mingo@elte.hu>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Li Zefan <lizf@cn.fujitsu.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      53da59aa
  59. 05 5月, 2010 1 次提交
    • S
      tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header · 2e26ca71
      由 Steven Rostedt 提交于 
      When more than one header is included under CREATE_TRACE_POINTS
the DECLARE_TRACE() macro is not defined back to its original meaning
and the second include will fail to initialize the TRACE_EVENT()
and DECLARE_TRACE() correctly.

To fix this the tracepoint.h file moves the define of DECLARE_TRACE()
out of the #ifdef _LINUX_TRACEPOINT_H protection (just like the
define of the TRACE_EVENT()). This way the define_trace.h will undef
the DECLARE_TRACE() at the end and allow new headers to start
from scratch.

This patch also requires fixing the include/events/napi.h

It currently uses DECLARE_TRACE() and should be converted to a TRACE_EVENT()
format. But I'll leave that change to the authors of that file.
But since the napi.h file depends on using the CREATE_TRACE_POINTS
and does not define its own DEFINE_TRACE() it must use the define_trace.h
method instead.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      2e26ca71
  61. 16 3月, 2010 1 次提交
    • L
      rcu: Fix tracepoints & lockdep false positive · 7f5b7742
      由 Lai Jiangshan 提交于 
      tracepoint.h uses rcu_dereference(), which triggers this warning:

[    0.701161] ===================================================
[    0.702211] [ INFO: suspicious rcu_dereference_check() usage. ]
[    0.702716] ---------------------------------------------------
[    0.703203] include/trace/events/workqueue.h:68 invoked rcu_dereference_check() without protection!
[    0.703971] [ 0.703990] other info that might help us debug this:
[    0.703993]
[    0.705590]
[    0.705604] rcu_scheduler_active = 1, debug_locks = 0
[    0.706712] 1 lock held by swapper/1:
[    0.707229]  #0:  (cpu_add_remove_lock){+.+.+.}, at: [<c0142f54>] cpu_maps_update_begin+0x14/0x20
[    0.710097]
[    0.710106] stack backtrace:
[    0.712602] Pid: 1, comm: swapper Not tainted 2.6.34-rc1-tip-01613-g72662bb #168
[    0.713231] Call Trace:
[    0.713997]  [<c017174d>] lockdep_rcu_dereference+0x9d/0xb0
[    0.714746]  [<c015a117>] create_workqueue_thread+0x107/0x110
[    0.715353]  [<c015aee0>] ? worker_thread+0x0/0x340
[    0.715845]  [<c015a8e8>] __create_workqueue_key+0x138/0x240
[    0.716427]  [<c0142f92>] ? cpu_maps_update_done+0x12/0x20
[    0.717012]  [<c086b12f>] init_workqueues+0x6f/0x80
[    0.717530]  [<c08576d2>] kernel_init+0x102/0x1f0
[    0.717570]  [<c08575d0>] ? kernel_init+0x0/0x1f0
[    0.718944]  [<c01030fa>] kernel_thread_helper+0x6/0x10
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B9F48AD.4000404@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7f5b7742
  63. 26 11月, 2009 1 次提交
    • I
      events: Rename TRACE_EVENT_TEMPLATE() to DECLARE_EVENT_CLASS() · 091ad365
      由 Ingo Molnar 提交于 
      It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?

To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:

  DECLARE_EVENT_CLASS(class)

    DEFINE_EVENT(class, event1)
    DEFINE_EVENT(class, event2)
    DEFINE_EVENT(class, event3)

To complete this logic we should also rename TRACE_EVENT() to:

  DEFINE_SINGLE_EVENT(single_event)

... but in a more quiet moment of the kernel cycle.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      091ad365
  65. 25 11月, 2009 2 次提交
    • S
      tracing: Create new DEFINE_EVENT_PRINT · e5bc9721
      由 Steven Rostedt 提交于 
      After creating the TRACE_EVENT_TEMPLATE I started to look at other
trace points to see what duplication was made. I noticed that there
are several trace points where they are almost identical except for
the name and the output format. Since TRACE_EVENT_TEMPLATE was successful
in bringing down the size of trace events, I added a DEFINE_EVENT_PRINT.

DEFINE_EVENT_PRINT is used just like DEFINE_EVENT is. That is, the
DEFINE_EVENT_PRINT also uses a TRACE_EVENT_TEMPLATE, but it allows the
developer to overwrite the print format. If there are two or more
TRACE_EVENTS that are identical except for the name and print, then
they can be converted to use a TRACE_EVENT_TEMPLATE. Since the
TRACE_EVENT_TEMPLATE already does the print output, the first trace event
would have its print format held in the TRACE_EVENT_TEMPLATE and
be defined with a DEFINE_EVENT. The rest will use the DEFINE_EVENT_PRINT
and override the print format.

Converting the sched trace points to both DEFINE_EVENT and
DEFINE_EVENT_PRINT. Five were converted to DEFINE_EVENT and two were
converted to DEFINE_EVENT_PRINT.

I was able to get the following:

$ size kernel/sched.o-*
   text	   data	    bss	    dec	    hex	filename
  79299	   6776	   2520	  88595	  15a13	kernel/sched.o-notrace
 101941	  11896	   2584	 116421	  1c6c5	kernel/sched.o-templ
 104779	  11896	   2584	 119259	  1d1db	kernel/sched.o-trace

sched.o-notrace is the scheduler compiled with no trace points.
sched.o-templ is with the use of DEFINE_EVENT and DEFINE_EVENT_PRINT
sched.o-trace is the current trace events.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      e5bc9721
    • S
      tracing: Create new TRACE_EVENT_TEMPLATE · ff038f5c
      由 Steven Rostedt 提交于 
      There are some places in the kernel that define several tracepoints and
they are all identical besides the name. The code to enable, disable and
record is created for every trace point even if most of the code is
identical.

This patch adds TRACE_EVENT_TEMPLATE that lets the developer create
a template TRACE_EVENT and create trace points with DEFINE_EVENT, which
is based off of a given template. Each trace point used by this
will share most of the code, and bring down the size of the kernel
when there are several duplicate events.

Usage is:

TRACE_EVENT_TEMPLATE(name, proto, args, tstruct, assign, print);

Which would be the same as defining a normal TRACE_EVENT.

To create the trace events that the trace points will use:

DEFINE_EVENT(template, name, proto, args) is done. The template
is the name of the TRACE_EVENT_TEMPLATE to use. The name is the
name of the trace point. The parameters proto and args must be the same
as the proto and args of the template. If they are not the same,
then a compile error will result. I tried hard removing this duplication
but the C preprocessor is not powerful enough (or my CPP magic
experience points is not at a high enough level) to not need them.

A lot of trace events are coming in with new XFS development. Most of
the trace points are identical except for the name. The following shows
the advantage of having TRACE_EVENT_TEMPLATE:

$ size fs/xfs/xfs.o.*
    text          data     bss     dec     hex filename
  452114          2788    3520  458422   6feb6 fs/xfs/xfs.o.old
  638482         38116    3744  680342   a6196 fs/xfs/xfs.o.template
  996954         38116    4480 1039550   fdcbe fs/xfs/xfs.o.trace

xfs.o.old is without any tracepoints.
xfs.o.template uses the new TRACE_EVENT_TEMPLATE.
xfs.o.trace uses the current TRACE_EVENT macros.
Requested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ff038f5c
  67. 24 9月, 2009 1 次提交
  69. 23 9月, 2009 1 次提交