- 18 11月, 2010 11 次提交
-
-
由 Alex Deucher 提交于
We were previously dropping alignment requests on the floor when allocating buffers so we always ended up page aligned. Certain tiling modes on 6xx+ require larger alignment which wasn't happening before. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This causes the connector to not be added since i2c init fails for the adapter. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31688 Noticed by Ari Savolainen. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Ari Savolainen <ari.m.savolainen@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
These are external encoder chips connected via DVO or DP. The actual external encoder programming is handled by the kms encoder functions for primary encoder. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Handle all the various asic family specific things for DVO. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The eDP panel must be powered up for aux transactions, so power it up for detect and mode probe functions, otherwise power it up or down based on dpms. v2: - only mess with eDP panel on DCE4+ - only mess with eDP panel on eDP connectors, not all DP connectors v3: - be extra careful to only mess with eDP panels on eDP connectors v4: - avoid possible null derefernce if a connector has not been assigned to the encoder Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
If there was no connector mapped to the encoder, atombios_get_encoder_mode() returned 0 which is the id for DP. Return something sane instead based on the encoder id. This avoids hitting the DP paths on non-DP encoders. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Seems some newer systems require this explicitly. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Looks like a typo in: drm/radeon/r600: fix tiling issues in CS checker. (f30df2fa) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Vasiliy Kulikov 提交于
enable_vblank implementations should use negative result to indicate error. radeon_enable_vblank() returns EINVAL in this case. Change this to -EINVAL. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Tiled buffers have the same alignment requirements regardless of whether the surface is for db, cb, or textures. Previously, the calculations where inconsistent for each buffer type. - Unify the alignment calculations in a common function - Standardize the alignment units (pixels for pitch/height/depth, bytes for base) - properly check the buffer base alignments Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 14 11月, 2010 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: drivers/pcmcia/soc_common.c: Use printf extension %pV pcmcia: fix warning in synclink driver pcmcia/sa1100: don't put machine specific init functions in .init.text pcmcia/cm4000: fix error code pd6729: Coding Style fixes
-
由 Ingo Molnar 提交于
This reverts commit 47d3904f. Crashes any x86 serial console bootup: Console: colour VGA+ 80x25 BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 ... Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - Fix AES-CBC handling on odd-block-sized input crypto: n2 - dubious error check
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] soc-camera: Compile fixes for mx2-camera [media] SoC Camera: ov6650: minor cleanups [media] SOC Camera: OMAP1: typo fix [media] SoC Camera: OMAP1: update for recent videobuf changes [media] SoC Camera: OMAP1: update for recent framework changes [media] ARM mx3_camera: check for DMA engine type [media] tm6000: bugfix set tv standards [media] cafe_ccic: fix subdev configuration [media] saa7134: Fix autodetect for Behold A7 and H7 TV cards [media] v4l: kill the BKL [media] BZ#22292: dibx000_common: Restore i2c algo pointer
-
由 Jim Bos 提交于
More recent GCC caused the i8k driver to stop working, on Slackware compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't work anymore, meaning the driver didn't load or gave total nonsensical output. As it turned out the asm(..) statement forgot to mention it modifies the *regs variable. Credits to Andi Kleen and Andreas Schwab for providing the fix. Signed-off-by: NJim Bos <jim876@xs4all.nl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jones 提交于
Currently we have: --w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method which is just crazy. Change this to --w-------. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com> Cc: stable@kernel.org (for 2.6.36) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 11月, 2010 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) can-bcm: fix minor heap overflow gianfar: Do not call device_set_wakeup_enable() under a spinlock ipv6: Warn users if maximum number of routes is reached. docs: Add neigh/gc_thresh3 and route/max_size documentation. axnet_cs: fix resume problem for some Ax88790 chip ipv6: addrconf: don't remove address state on ifdown if the address is being kept tcp: Don't change unlocked socket state in tcp_v4_err(). x25: Prevent crashing when parsing bad X.25 facilities cxgb4vf: add call to Firmware to reset VF State. cxgb4vf: Fail open if link_start() fails. cxgb4vf: flesh out PCI Device ID Table ... cxgb4vf: fix some errors in Gather List to skb conversion cxgb4vf: fix bug in Generic Receive Offload cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue() ixgbe: Look inside vlan when determining offload protocol. bnx2x: Look inside vlan when determining checksum proto. vlan: Add function to retrieve EtherType from vlan packets. virtio-net: init link state correctly ucc_geth: Fix deadlock ucc_geth: Do not bring the whole IF down when TX failure. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/pata_octeon_cf.c: delete double assignment pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test libata: fix NULL sdev dereference race in atapi_qc_complete()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits) Revert "staging: tidspbridge: replace iommu custom for opensource implementation" Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c" Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name" Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c" Revert "staging: tidspbridge - fix mmufault support" Revert "staging: tidspbridge - remove hw directory" Revert "staging: tidspbridge - move all iommu related code to a new file" Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct" Revert "staging: tidspbridge - remove reserved memory clean up" Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions" Revert "staging: tidspbridge - remove dmm custom module" Revert "staging: tidspbridge - update Kconfig to select IOMMU module" staging: tidspbridge: hardcode SCM macros while fix is upstreamed Staging: keucr driver: fix uninitialized variable & proper memset length omap: dsp: remove shm from normal memory Staging: wlan-ng: Fix wrong #ifdef #endif sequence Staging: Update parameters for cfg80211 key management operation Staging: ath6kl: Fix pointer casts on 64-bit architectures Staging: batman-adv: suppress false warning when changing the mac address Staging: batman-adv: fix interface alternating and bonding reggression ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits) Revert "USB: xhci: Use GFP_ATOMIC under spin_lock" USB: ohci-jz4740: Fix spelling in MODULE_ALIAS UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails usb: core: fix information leak to userland usb: misc: iowarrior: fix information leak to userland usb: misc: sisusbvga: fix information leak to userland usb: subtle increased memory usage in u_serial USB: option: fix when the driver is loaded incorrectly for some Huawei devices. USB: xhci: Use GFP_ATOMIC under spin_lock usb: gadget: goku_udc: add registered flag bit, fixing build USB: ehci/mxc: compile fix USB: Fix FSL USB driver on non Open Firmware systems USB: the development of the usb tree is now in git usb: musb: fail unaligned DMA transfers on v1.8 and above USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial usb.h: fix ioctl kernel-doc info usb: musb: gadget: kill duplicate code in musb_gadget_queue() usb: musb: Fix handling of spurious SESSREQ usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time USB: musb: blackfin: push clkin value to platform resources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: Fix length handling n_gsm: Copy n2 over when configuring via ioctl interface serial: bfin_5xx: grab port lock before making port termios changes serial: bfin_5xx: disable CON_PRINTBUFFER for consoles serial: bfin_5xx: remove redundant SSYNC to improve TX speed serial: bfin_5xx: always include DMA headers vcs: make proper usage of the poll flags amiserial: Remove unused variable icount 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang tty_ldisc: Fix BUG() on hangup TTY: restore tty_ldisc_wait_idle SERIAL: blacklist si3052 chip drivers/serial/bfin_5xx.c: Fix line continuation defects tty: prevent DOS in the flush_to_ldisc 8250: add support for Kouwell KW-L221N-2 nozomi: Fix warning from the previous TIOCGCOUNT changes tty: fix warning in synclink driver tty: Fix formatting in tty.h tty: the development tree is now done in git
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: do not release any memory under 1M in domain 0 xen: events: do not unmask event channels on resume xen: correct size of level2_kernel_pgt
-
由 Linus Torvalds 提交于
Merge branch 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: MAINTAINERS: Mark XEN lists as moderated xen-pcifront: fix PCI reference leak xen-pcifront: Remove duplicate inclusion of headers. xen: fix memory leak in Xen PCI MSI/MSI-X allocator. MAINTAINERS: Update mailing list name for Xen pieces.
-
由 Julia Lawall 提交于
Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of CONFIG_PATA_WINBOND_VLB_MODULE. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: N"Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
SCSI commands may be issued between __scsi_add_device() and dev->sdev assignment, so it's unsafe for ata_qc_complete() to dereference dev->sdev->locked without checking whether it's NULL or not. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Oliver Hartkopp 提交于
On 64-bit platforms the ASCII representation of a pointer may be up to 17 bytes long. This patch increases the length of the buffer accordingly. http://marc.info/?l=linux-netdev&m=128872251418192&w=2Reported-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> CC: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
The gianfar driver calls device_set_wakeup_enable() under a spinlock, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spinlock-protected area. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Greear 提交于
This gives users at least some clue as to what the problem might be and how to go about fixing it. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Greear 提交于
Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
axnet_cs: Some Ax88790 chip need to reinitialize the CISREG_CCSR register after resume. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Colitti 提交于
Currently, addrconf_ifdown does not delete statically configured IPv6 addresses when the interface is brought down. The intent is that when the interface comes back up the address will be usable again. However, this doesn't actually work, because the system stops listening on the corresponding solicited-node multicast address, so the address cannot respond to neighbor solicitations and thus receive traffic. Also, the code notifies the rest of the system that the address is being deleted (e.g, RTM_DELADDR), even though it is not. Fix it so that none of this state is updated if the address is being kept on the interface. Tested: Added a statically configured IPv6 address to an interface, started ping, brought link down, brought link up again. When link came up ping kept on going and "ip -6 maddr" showed that the host was still subscribed to there Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexey Kuznetsov noticed a regression introduced by commit f1ecd5d9 ("Revert Backoff [v3]: Revert RTO on ICMP destination unreachable") The RTO and timer modification code added to tcp_v4_err() doesn't check sock_owned_by_user(), which if true means we don't have exclusive access to the socket and therefore cannot modify it's critical state. Just skip this new code block if sock_owned_by_user() is true and eliminate the now superfluous sock_owned_by_user() code block contained within. Reported-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net> CC: Damian Lukowski <damian@tvk.rwth-aachen.de> Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
-
由 Dan Rosenberg 提交于
Now with improved comma support. On parsing malformed X.25 facilities, decrementing the remaining length may cause it to underflow. Since the length is an unsigned integer, this will result in the loop continuing until the kernel crashes. This patch adds checks to ensure decrementing the remaining length does not cause it to wrap around. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
Add call to Firmware to reset its VF State when we first attach to the VF. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
Fail open if link_start() fails. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
Add a bunch of T4 Device IDs for the VF Driver. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
There were some errors in the way that internal Gather Lists were being translated into skb's. This also makes the VF Driver look more like the PF Driver to facilitate easier comarison. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
Fix botch in Generic Receive Offload (the Packet Gather List Total length field wasn't being initialized). Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-