- 30 10月, 2016 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "We haven't seen a whole lot of fixes for the first two weeks since the merge window, but here is the batch that we have at the moment. Nothing sticks out as particularly bad or scary, it's mostly a handful of smaller fixes to several platforms. The Uniphier reset controller changes could probably have been delayed to 4.10, but they're not scary and just plumbing up driver changes that went in during the merge window. We're also adding another maintainer to Marvell Berlin platforms, to help out when Sebastian is too busy. Yay teamwork!" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Updated NAND DT properties for NS2 SVK arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER arm64: dts: Add timer erratum property for LS2080A and LS1043A arm64: dts: rockchip: remove the abuse of keep-power-in-suspend ARM: multi_v7_defconfig: Enable Intel e1000e driver MAINTAINERS: add myself as Marvell berlin SoC maintainer bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST ARM: dts: fix the SD card on the Snowball arm64: dts: rockchip: remove always-on and boot-on from vcc_sd arm64: dts: marvell: fix clocksource for CP110 master SPI0 ARM: mvebu: Select corediv clk for all mvebu v7 SoC
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc driver fixes for reported issues. The "biggest" are two binder fixes for reported issues that have been shipping in Android phones for a while now, the others are various fixes for reported problems. And there's a MAINTAINERS update for good measure. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: Add entry for genwqe driver VMCI: Doorbell create and destroy fixes GenWQE: Fix bad page access during abort of resource allocation vme: vme_get_size potentially returning incorrect value on failure extcon: qcom-spmi-misc: Sync the extcon state on interrupt hv: do not lose pending heartbeat vmbus packets mei: txe: don't clean an unprocessed interrupt cause. ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct ANDROID: binder: Add strong ref checks
-
由 Olof Johansson 提交于
Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Correct regulator handling on Rockchip arm64 boards to make bind/unbind calls work correctly and remove a sdio-only property from non-sdio mmc hosts, that accidentially was added there. * tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: remove the abuse of keep-power-in-suspend arm64: dts: rockchip: remove always-on and boot-on from vcc_sd Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes This pull request contains a single fix for Broadcom ARM64-based SoCs: - Ray adds the required bus width and OOB sector size properties to the Northstar 2 SVK reference board in order for the NAND controller to work properly * tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux: arm64: dts: Updated NAND DT properties for NS2 SVK Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 4.9: - A couple of patches from Fabio to fix the GPC power domain regression which is caused by PM Domain core change 0159ec67 ("PM / Domains: Verify the PM domain is present when adding a provider"), and a related kernel crash seen with multi_v7_defconfig build. - Correct the PHY ID mask for AR8031 to match phy driver code. - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC. - Correct vf610 global timer IRQ flag to avoid warning from gic driver after commit 992345a5 ("irqchip/gic: WARN if setting the interrupt type for a PPI fails"). * tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Add timer erratum property for LS2080A and LS1043A Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes UniPhier ARM SoC fixes for v4.9 - Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig - Rename wrongly-named mioctrl to sdctrl * tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fixes from Greg KH: "Here are two small driver core / kernfs fixes for 4.9-rc3. One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more explicit that this is a crazy thing to enable for a distro kernel (thanks for trying Fedora!), the other resolves an issue with vim opening kernfs files (sysfs, configfs, etc.) Both have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger kernfs: Add noop_fsync to supported kernfs_file_fops
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for reported issues for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a sysfs file that was obviously wrong, and had never been tested, so it was moved to debugfs as that is where it belongs. The others are small bug fixes for reported issues with various staging or iio drivers. All have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: greybus: fix a leak on error in gb_module_create() greybus: es2: fix error return code in ap_probe() greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state() staging: android: ion: Fix error handling in ion_query_heaps() iio: accel: sca3000_core: avoid potentially uninitialized variable iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value staging/lustre/llite: Move unstable_stats from sysfs to debugfs Staging: wilc1000: Fix kernel Oops on opening the device staging: android/ion: testing the wrong variable Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors iio: maxim_thermocouple: Align 16 bit big endian value of raw reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for reported issues for 4.9-rc3. Nothing major, but they do resolve a bunch of problems with the tty core changes that are in 4.9-rc1, and finally the atmel serial driver is back working properly. All have been in linux-next with no reported issues" * tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup tty: serial_core: Fix serial console crash on port shutdown tty/serial: at91: fix hardware handshake on Atmel platforms vt: clear selection before resizing sc16is7xx: always write state when configuring GPIO as an output sh-sci: document R8A7743/5 support tty: serial: 8250: 8250_core: NXP SC16C2552 workaround tty: limit terminal size to 4M chars tty: serial: fsl_lpuart: Fix Tx DMA edge case serial: 8250_lpss: enable MSI for sure serial: core: fix console problems on uart_close serial: 8250_uniphier: fix clearing divisor latch access bit serial: 8250_uniphier: fix more unterminated string serial: pch_uart: add terminate entry for dmi_system_id tables devicetree: bindings: uart: Add new compatible string for ZynqMP serial: xuartps: Add new compatible string for ZynqMP serial: SERIAL_STM32 should depend on HAS_DMA serial: stm32: Fix comparisons with undefined register tty: vt, fix bogus division in csi_J
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 4.9-rc3. There is the usual number of gadget and xhci patches in here to resolved reported issues, as well as some usb-serial driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: chipidea: host: fix NULL ptr dereference during shutdown usb: renesas_usbhs: add wait after initialization for R-Car Gen3 usb: increase ohci watchdog delay to 275 msec usb: musb: Call pm_runtime from musb_gadget_queue usb: musb: Fix hardirq-safe hardirq-unsafe lock order error usb: ehci-platform: increase EHCI_MAX_RSTS to 4 usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. USB: serial: fix potential NULL-dereference at probe xhci: use default USB_RESUME_TIMEOUT when resuming ports. xhci: workaround for hosts missing CAS bit xhci: add restart quirk for Intel Wildcatpoint PCH USB: serial: cp210x: fix tiocmget error handling wusb: fix error return code in wusb_prf() Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size" Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" Revert "usb: dwc2: gadget: change variable name to more meaningful" USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 wusb: Stop using the stack for sg crypto scratch space usb: dwc3: Fix size used in dma_free_coherent() usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable ...
-
- 29 10月, 2016 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These fix recent ACPICA regressions, an older PCI IRQ management regression, and an incorrect return value of a function in the APEI code. Specifics: - Fix three ACPICA issues related to the interpreter locking and introduced by recent changes in that area (Lv Zheng). - Fix a PCI IRQ management regression introduced during the 4.7 cycle and related to the configuration of shared IRQs on systems with an ISA bus (Sinan Kaya). - Fix up a return value of one function in the APEI code (Punit Agrawal)" * tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination ACPI / APEI: Fix incorrect return value of ghes_proc() ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix two intel_pstate issues related to the way it works when the scaling_governor sysfs attribute is set to "performance" and fix up messages in the system suspend core code. Specifics: - Fix a missing KERN_CONT in a system suspend message by converting the affected code to using pr_info() and pr_cont() instead of the "raw" printk() (Jon Hunter). - Make intel_pstate set the CPU P-state from its .set_policy() callback when the scaling_governor sysfs attribute is set to "performance" so that it interacts with NOHZ_FULL more predictably which was the case before 4.7 (Rafael Wysocki). - Make intel_pstate always request the maximum allowed P-state when the scaling_governor sysfs attribute is set to "performance" to prevent it from effectively ingoring that setting is some situations (Rafael Wysocki)" * tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Always set max P-state in performance mode PM / suspend: Fix missing KERN_CONT for suspend message cpufreq: intel_pstate: Set P-state upfront in performance mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: - support IDU intc for UP builds - support gz, lzma compressed uImage [Daniel Mentz] - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus] - syscall for userspace cmpxchg assist for configs lacking hardware atomics - rework of boot log printing mainly for identifying older arc700 cores - retiring some old code, build toggles * tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: module: print pretty section names ARC: module: elide loop to save reference to .eh_frame ARC: mm: retire ARC_DBG_TLB_MISS_COUNT... ARC: build: retire old toggles ARC: boot log: refactor cpu name/release printing ARC: boot log: remove awkward space comma from MMU line ARC: boot log: don't assume SWAPE instruction support ARC: boot log: refactor printing abt features not captured in BCRs ARCv2: boot log: print IOC exists as well as enabled status ARCv2: IOC: use @ioc_enable not @ioc_exist where intended ARC: syscall for userspace cmpxchg assist ARC: fix build warning in elf.h ARC: Adjust cpuinfo for non-continuous cpu ids ARC: [build] Support gz, lzma compressed uImage ARCv2: intc: untangle SMP, MCIP and IDU
-
由 Rafael J. Wysocki 提交于
* acpica-fixes: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination * acpi-pci-fixes: ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages * acpi-apei-fixes: ACPI / APEI: Fix incorrect return value of ghes_proc()
-
由 Lv Zheng 提交于
In the code path of acpi_ev_initialize_region(), there is namespace modification code unlocked. This patch tunes the code to make sure such modification are always locked. Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues) Tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
There is a lock unbalanced exit path in acpi_ds_initialize_method(), this patch corrects it. Fixes: 441ad11d (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization) Tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
The last step of the method termination should be the end of the method serialization. Otherwise, the steps happening after it will face the race issues that cannot be protected by the method serialization mechanism. This patch fixes this issue by moving the per-method-object deletion code prior than the end of the method serialization. Otherwise, the possible race issues may result in AE_ALREADY_EXISTS error in a parallel environment. Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues) Reported-and-tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Convert cmp to cmpd in idle enter sequence (Segher Boessenkool) - cxl: Fix leaking pid refs in some error paths (Vaibhav Jain) - Re-fix race condition between going idle and entering guest (Paul Mackerras) - Fix race condition in setting lock bit in idle/wakeup code (Paul Mackerras) - radix: Use tlbiel only if we ever ran on the current cpu (Aneesh Kumar K.V) - relocation, register save fixes for system reset interrupt (Nicholas Piggin) Fixes for code merged this cycle: - Fix CONFIG_ALIVEC typo in restore_tm_state() (Valentin Rothberg) - KVM: PPC: Book3S HV: Fix build error when SMP=n (Michael Ellerman)" * tag 'powerpc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: relocation, register save fixes for system reset interrupt powerpc/mm/radix: Use tlbiel only if we ever ran on the current cpu powerpc/process: Fix CONFIG_ALIVEC typo in restore_tm_state() powerpc/64: Fix race condition in setting lock bit in idle/wakeup code powerpc/64: Re-fix race condition between going idle and entering guest cxl: Fix leaking pid refs in some error paths powerpc: Convert cmp to cmpd in idle enter sequence KVM: PPC: Book3S HV: Fix build error when SMP=n
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq-fixes: cpufreq: intel_pstate: Always set max P-state in performance mode cpufreq: intel_pstate: Set P-state upfront in performance mode * pm-sleep-fixes: PM / suspend: Fix missing KERN_CONT for suspend message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc kernel fixes: a virtualization environment related fix, an uncore PMU driver removal handling fix, a PowerPC fix and new events for Knights Landing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Honour the CPUID for number of fixed counters in hypervisors perf/powerpc: Don't call perf_event_disable() from atomic context perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic perf/x86/intel/cstate: Add C-state residency events for Knights Landing
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "A build fix, a NULL de-reference found by static analysis, a misuse of the percpu_ref_exit() (tagged for -stable), and notification of failed attempts to clear media errors. These patches have received a build success notification from the 0day- kbuild-robot and appeared in next-20161028" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix percpu_ref_exit ordering nvdimm: make CONFIG_NVDIMM_DAX 'bool' pmem: report error on clear poison failure libnvdimm, namespace: potential NULL deref on allocation error
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc3. They're all pretty straightforward: a couple of NUMA issues from the Huawei folks and a thinko in __page_to_voff that seems to be benign, but is certainly better off fixed. Summary: - couple of NUMA fixes - thinko in __page_to_voff" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: fix __page_to_voff definition arm64/numa: fix incorrect log for memory-less node arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximity
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: three build fixes, an unwinder fix and a microcode loader fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y x86: Fix export for mcount and __fentry__ x86/quirks: Hide maybe-uninitialized warning x86/build: Fix build with older GCC versions x86/unwind: Fix empty stack dereference in guess unwinder
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "Fix four timer locking races: two were noticed by Linus while reviewing the code while chasing for a corruption bug, and two from fixing spurious USB timeouts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Prevent base clock corruption when forwarding timers: Prevent base clock rewind when forwarding clock timers: Lock base for same bucket optimization timers: Plug locking race vs. timer migration
-
由 Linus Torvalds 提交于
Merge branches 'core-urgent-for-linus', 'irq-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool, irq and scheduler fixes from Ingo Molnar: "One more objtool fixlet for GCC6 code generation patterns, an irq DocBook fix and an unused variable warning fix in the scheduler" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix rare switch jump table pattern detection * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: doc: Add missing parameter for msi_setup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Remove unused but set variable 'rq'
-
由 Vineet Gupta 提交于
Now that we have referece to section name string table in apply_relocate_add(), use it to - print the name of section being relocated - print symbol with NULL name (since it refers to a section) before | Section to fixup 7000a060 | ========================================================= | rela->r_off | rela->addend | sym->st_value | ADDR | VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [] | 40 0 7000a000 7000a0a0 7000a000 [] after | Section to fixup .eh_frame @7000a060 | ========================================================= | r_off r_add st_value ADDRESS VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [.init.text] | 40 0 7000a000 7000a0a0 7000a000 [.exit.text] Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
The loop was really needed in .debug_frame regime where wanted make it as SH_ALLOC so that apply_relocate_add() would process it. That's not needed for .eh_frame, so we check this in apply_relocate_add() which gets called for each section. Note that we need to save reference to "section name strings" section in module_frob_arch_sections() since apply_relocate_add() doesn't get that Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
These are really ancient toggles and tools no longer require them to be passed. This paves way for deprecating them in long run. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
The motivation is to identify ARC750 vs. ARC770 (we currently print generic "ARC700"). A given ARC700 release could be 750 or 770, with same ARCNUM (or family identifier which is unfortunate). The existing arc_cpu_tbl[] kept a single concatenated string for core name and release which thus doesn't work for 750 vs. 770 identification. So split this into 2 tables, one with core names and other with release. And while we are at it, get rid of the range checking for family numbers. We just document the known to exist cores running Linux and ditch others. With this in place, we add detection of ARC750 which is - cores 0x33 and before - cores 0x34 and later with MMUv2 Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This came to light when helping a customer with oldish ARC750 core who were getting instruction errors because of lack of SWAPE but boot log was incorrectly printing it as being present Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
On older arc700 cores, some of the features configured were not present in Build config registers. To print about them at boot, we just use the Kconfig option i.e. whether linux is built to use them or not. So yes this seems bogus, but what else can be done. Moreover if linux is booting with these enabled, then the Kconfig info is a good indicator anyways. Over time these "hacks" accumulated in read_arc_build_cfg_regs() as well as arc_cpu_mumbojumbo(). so refactor and move all of those in a single place: read_arc_build_cfg_regs(). This causes some code redcution too: | bloat-o-meter2 arch/arc/kernel/setup.o.0 arch/arc/kernel/setup.o.1 | add/remove: 0/0 grow/shrink: 2/1 up/down: 64/-132 (-68) | function old new delta | setup_processor 610 670 +60 | cpuinfo_arc700 76 80 +4 | arc_cpu_mumbojumbo 752 620 -132 Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "My patch fixes the btrfs list_head abuse that we tracked down during Dave Jones' memory corruption investigation. With both Jens and my patches in place, I'm no longer able to trigger problems. Filipe is fixing a difficult old bug between snapshots, balance and send. Dave is cooking a few more for the next rc, but these are tested and ready" * 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix races on root_log_ctx lists btrfs: fix incremental send failure caused by balance
-
由 Vineet Gupta 提交于
Previously we would not print the case when IOC existed but was not enabled. And while at it, reduce one line off boot printing by consolidating the Peripheral address space and IO-Coherency which in a way applies to them Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains the usual stuff -- the fixups and quirks for HD-audio and USB-audio, in addition to a bad regression fix in ALSA sequencer timer since 4.8, and a trivial fix for asihpi PCI driver" * tag 'sound-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for Syntek STK1160 ALSA: seq: Fix time account regression ALSA: hda - Fix surround output pins for ASRock B150M mobo ALSA: hda - Fix headset mic detection problem for two Dell laptops ALSA: asihpi: fix kernel memory disclosure ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table ALSA: hda - allow 40 bit DMA mask for NVidia devices
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm x86/pat regression fixes from Dave Airlie: "This is a standalone pull request for the fix for a regression introduced in -rc1 by a change to vm_insert_mixed to start using the PAT range tracking to validate page protections. With this fix in place, all the VRAM mappings for GPU drivers ended up at UC instead of WC. There are probably better ways to fix this long term, but nothing I'd considered for -fixes that wouldn't need more settling in time. So I've just created a new arch API that the drivers can reserve all their VRAM aperture ranges as WC" * tag 'drm-x86-pat-regression-fix' of git://people.freedesktop.org/~airlied/linux: drm/drivers: add support for using the arch wc mapping API. x86/io: add interface to reserve io memtype for a resource range. (v1.1)
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - a couple DM raid and DM mirror fixes - a couple .request_fn request-based DM NULL pointer fixes - a fix for a DM target reference count leak, on target load error, that prevented associated DM target kernel module(s) from being removed * tag 'dm-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: fix missing dm_put_target_type() in dm_table_add_target() dm rq: clear kworker_task if kthread_run() returned an error dm: free io_barrier after blk_cleanup_queue call dm raid: fix activation of existing raid4/10 devices dm mirror: use all available legs on multiple failures dm mirror: fix read error on recovery after default leg failure dm raid: fix compat_features validation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull key fixes from James Morris: - fix a buffer overflow when displaying /proc/keys [CVE-2016-7042]. - fix broken initialisation in the big_key implementation that can result in an oops. - make big_key depend on having a random number generator available in Kconfig. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security/keys: make BIG_KEYS dependent on stdrng. KEYS: Sort out big_key initialisation KEYS: Fix short sprintf buffer in /proc/keys show function
-
- 28 10月, 2016 1 次提交
-
-
由 Gabriel Krisman Bertazi 提交于
Frank and I maintain this Signed-off-by: NGabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: haver@linux.vnet.ibm.com Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>= Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-