At boot time, before switching to a virtual UEFI memory map, firmware
expects UEFI memory and IO regions to be identity mapped whenever
kernel makes runtime services calls. The existing early boot code
creates an identity map of kernel text/data but this is not sufficient
for UEFI. This patch adds a create_id_mapping() function which reuses
the core code of the existing create_mapping().
Signed-off-by: NMark Salter <msalter@redhat.com>
[ Fixed error message formatting (%pa). ]
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Do a complete FPU context save/restore around the EFI calls. This required
as runtime EFI firmware may potentially use the FPU.

This change covers only the i386 configuration.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Do a complete FPU context save/restore around the EFI calls. This required
as runtime EFI firmware may potentially use the FPU.

This change covers only the x86_64 configuration.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

For i386, all the EFI system runtime services functions return efi_status_t
except efi_reset_system_system. Therefore, not all functions can be covered
by the same macro in case the macro needs to do more than calling the function
(i.e., return a value). The purpose of the __efi_call_virt macro is to be used
when no return value is expected.

For x86_64, this macro would not be needed as all the runtime services return
u64. However, the same code is used for both x86_64 and i386. Thus, the macro
__efi_call_virt is also defined to not break compilation.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It may be necessary to save and restore the FPU context during EFI runtime
system services calls. However, this may happen during boot and before
alternatives have run. Thus, we need to use static_cpu_has_safe instead.

The rationale behind the use of static_cpu_has_safe is the same as in
commit 5f8c4218 ("x86, fpu: Use static_cpu_has_safe
before alternatives") by Borislav Petkov.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>

We really only need one phys and one virt function call, and then only
one assembly function to make firmware calls.

Since we are not using the C type system anyway, we're not really losing
much by deleting the macros apart from no longer having a check that
we are passing the correct number of parameters. The lack of duplicated
code seems like a worthwhile trade-off.

Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Instead of truncating UTF-16 assuming all characters is ASCII,
properly convert it to UTF-8.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
[ Bug and style fixes. ]
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode.  The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic.  The visible result is that
the kernel hangs after printing "returning from prom_init".

This fixes it by checking for hypervisor mode being available before
setting LPCR.  If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE)
Signed-off-by: NSteven Miao <realmz6@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>

In v3.2 the Analog Devices ADT75 temperature sensor driver was removed
as an IIO driver and support for it was added to the LM75 HWMON driver.
But it was apparently overlooked to rename one reference to CONFIG_ADT75
to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

In v3.2 the Analog Devices AD7314 temperature sensor driver was removed
as an IIO driver and added as a HWMON driver. But it was apparently
overlooked to rename two references to CONFIG_AD7314 to
CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from
ad2s120x to ad2s1200. But it apparently forgot to rename the references
to this driver in the BF537-STAMP code. Rename these now, and use the
IS_ENABLED() macro, while we're at it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it
once and for all by using IS_ENABLED(), which is designed to avoid
issues like this.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NSteven Miao <realmz6@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>

drop unused head file
change pinmux request/free macro for backward compatiblity
add function declaration
Signed-off-by: NSteven Miao <realmz6@gmail.com>

The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.

Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org
Cc: <stable@vger.kernel.org>

The only user of Kconfig symbol IP_CHECKSUM_L1 got removed in v2.6.33,
with commit ddf9ddac ("Blackfin: convert
to generic checksum code"). We can remove the Kconfig entry for this
unused symbol now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

The Kconfig symbol GENERIC_GPIO was removed in v3.10. Nothing cares
about it anymore. It popped up somehow in v3.13, so it can be removed
again.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>

There is nothing special in that blackfin code. Use the core
implementation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Miao <realmz6@gmail.com>
Cc: bfin <adi-buildroot-devel@lists.sourceforge.net>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NSteven Miao <realmz6@gmail.com>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

New kexec-tools wants to pass kdump kernel needed memmap via E820
directly, instead of memmap=exactmap. This makes saved_max_pfn not
be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using
the same TCE table size, Muli suggest to hard code the size to max (8M).

We can't get rid of saved_max_pfn this time, for backward compatibility
with old first kernel and new second kernel. However new first kernel
and old second kernel can not work unfortunately.

v2->v1:
- retain saved_max_pfn so new 2nd kernel can work with old 1st kernel
  from Vivek
Signed-off-by: NWANG Chao <chaowang@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NMuli Ben-Yehuda <mulix@mulix.org>
Acked-by: NJon Mason <jdmason@kudzu.us>
Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.

While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,

 "The issue is the UEFI Fat driver might return the same function for
  'fh->read()' and 'h->read()'. While in our case it does not work with
  a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
  case, we return a different pointer when reading a directory and
  reading a file."

Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.

The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: NThomas Bächler <thomas@archlinux.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

commit 54b52d87 ("x86/efi: Build our own EFI services pointer
table") introduced a regression because the 64-bit file_size()
implementation passed a pointer to a 32-bit data object, instead of a
pointer to a 64-bit object.

Because the firmware treats the object as 64-bits regardless it was
reading random values from the stack for the upper 32-bits.

This resulted in people being unable to boot their machines, after
seeing the following error messages,

    Failed to get file info size
    Failed to alloc highmem for files
Reported-by: NDzmitry Sledneu <dzmitry.sledneu@gmail.com>
Reported-by: NKoen Kooi <koen@dominion.thruhere.net>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Protect more options for x86 with cc-option so that we don't get errors when
using clang instead of gcc.  Add more or different options when using clang as
well. Also need to enforce that SSE is off for clang and the stack is 8-byte
aligned.
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NMark Charlebois <charlebm@gmail.com>

The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti
(which also gets the current thread_info) instead of open-coding them in
arch/arm/vfp/*.S files.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArun KS <getarunks@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

asm/assembler.h is a better place for this macro since it is used by
asm files outside arch/arm/kernel/
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArun KS <getarunks@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We are currently using sysfs_schedule_callback() which is deprecated
and about to be removed. Switch to the new interface instead.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since v1:
	Edited the comment according to Srivatsa's suggestion.

During the testing, we encounter below WARN followed by Oops:

	WARNING: at kernel/sched/core.c:6218
	...
	NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200
	LR [c000000000101358] .build_sched_domains+0xec8/0x1200
	PACATMSCRATCH [800000000000f032]
	Call Trace:
	[c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200
	[c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510
	[c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0
	[c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30
	...
	Oops: Kernel access of bad area, sig: 11 [#1]
	...
	NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0
	LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200
	PACATMSCRATCH [8000000000029032]
	Call Trace:
	[c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0
	[c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200
	[c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510
	[c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0
	[c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30
	...

This was caused by that 'sd->groups == NULL' after building groups, which
was caused by the empty 'sd->span'.

The cpu's domain contained nothing because the cpu was assigned to a wrong
node, due to the following unfortunate sequence of events:

1. The hypervisor sent a topology update to the guest OS, to notify changes
   to the cpu-node mapping. However, the update was actually redundant - i.e.,
   the "new" mapping was exactly the same as the old one.

2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting
   the 'for-loop' in arch_update_cpu_topology().

3. So we ended up calling stop-machine() with an empty cpumask list, which made
   stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as
   the cpu to run the payload (the update_cpu_topology() function).

4. This causes update_cpu_topology() to be run by CPU0. And since 'updates'
   is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology()
   finds update->cpu as well as update->new_nid to be 0. In other words, we
   end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly.

Along with the following wrong updating, it causes the sched-domain rebuild
code to break and crash the system.

Fix this by skipping the topology update in cases where we find that
the topology has not actually changed in reality (ie., spurious updates).

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Nathan Fontenot <nfont@linux.vnet.ibm.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Robert Jennings <rcj@linux.vnet.ibm.com>
CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
CC: Alistair Popple <alistair@popple.id.au>
Suggested-by: N"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When building modules with a native le toolchain the linker will
generate R_PPC64_TOCSAVE relocations when it's safe to omit saving r2 on
a plt call.  This isn't helpful in the conext of a kernel module and the
kernel will fail to load those modules with an error like:
	nf_conntrack: Unknown ADD relocation: 109

This patch tells the linker to avoid createing R_PPC64_TOCSAVE
relocations allowing modules to load.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Here rcu_assign_pointer() is ensuring that the
initialization of a structure is carried out before storing a pointer
to that structure.
So, rcu_assign_pointer(p, NULL) can always safely be converted to
RCU_INIT_POINTER(p, NULL).
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

next-20140324 currently fails compiling celleb_defconfig with:

arch/powerpc/include/asm/opal.h:894:42: error: 'struct notifier_block' declared inside parameter list [-Werror]
arch/powerpc/include/asm/opal.h:894:42: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
arch/powerpc/include/asm/opal.h:896:14: error: 'struct notifier_block' declared inside parameter list [-Werror]

This is due to a missing include which is added here.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Just about all of these have been converted to __func__,
so convert the last uses.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Recent CPUs support quad word load and store instructions. Add
support to the alignment handler for them.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This call will not be understood by OPAL, and cause it to add an error
to it's log. Among other things, this is useful for testing the
behaviour of the log as it fills up.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

OPAL provides an in-memory circular buffer containing a message log
populated with various runtime messages produced by the firmware.

Provide a sysfs interface /sys/firmware/opal/msglog for userspace to
view the messages.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>