- 16 2月, 2017 4 次提交
-
-
由 Chris Wilson 提交于
In order to prevent accessing the hpd registers outside of the display power wells, we should refrain from writing to the registers before the display interrupts are enabled. [ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740155] Unclaimed read from register 0x1e1110 [ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers [ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384 [ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 4.740220] Call Trace: [ 4.740236] dump_stack+0x4d/0x6f [ 4.740251] __warn+0xc1/0xe0 [ 4.740265] warn_slowpath_fmt+0x4a/0x50 [ 4.740281] ? insert_work+0x77/0xc0 [ 4.740355] ? fwtable_write32+0x90/0x130 [i915] [ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740507] fwtable_read32+0xd8/0x130 [i915] [ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915] [ 4.740649] intel_hpd_init+0x68/0x80 [i915] [ 4.740716] i915_driver_load+0xe19/0x1380 [i915] [ 4.740784] i915_pci_probe+0x32/0x90 [i915] [ 4.740799] pci_device_probe+0x8b/0xf0 [ 4.740815] driver_probe_device+0x2b6/0x450 [ 4.740828] __driver_attach+0xda/0xe0 [ 4.740841] ? driver_probe_device+0x450/0x450 [ 4.740853] bus_for_each_dev+0x5b/0x90 [ 4.740865] driver_attach+0x19/0x20 [ 4.740878] bus_add_driver+0x166/0x260 [ 4.740892] driver_register+0x5b/0xd0 [ 4.740906] ? 0xffffffffa0166000 [ 4.740920] __pci_register_driver+0x47/0x50 [ 4.740985] i915_init+0x5c/0x5e [i915] [ 4.740999] do_one_initcall+0x3e/0x160 [ 4.741015] ? __vunmap+0x7c/0xc0 [ 4.741029] ? kmem_cache_alloc+0xcf/0x120 [ 4.741045] do_init_module+0x55/0x1c4 [ 4.741060] load_module+0x1f3f/0x25b0 [ 4.741073] ? __symbol_put+0x40/0x40 [ 4.741086] ? kernel_read_file+0x100/0x190 [ 4.741100] SYSC_finit_module+0xbc/0xf0 [ 4.741112] SyS_finit_module+0x9/0x10 [ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98 [ 4.741135] RIP: 0033:0x7f8559a140f9 [ 4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9 [ 4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011 [ 4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e [ 4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0 [ 4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924 v2: Set dev_priv->display_irqs_enabled to true for all platforms other than vlv/chv that manually control the display power domain. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.ukReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
-
由 Jani Nikula 提交于
No need to cater for old A revisions. Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-4-git-send-email-jani.nikula@intel.com
-
由 Jani Nikula 提交于
No need to cater for old A revisions. Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-3-git-send-email-jani.nikula@intel.com
-
由 Jani Nikula 提交于
No need to cater for old A revisions. Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-2-git-send-email-jani.nikula@intel.com
-
- 15 2月, 2017 36 次提交
-
-
由 Uma Shankar 提交于
MIPI Video Mode for high res panels (requiring dual link), need a 8X/3 divider to be programmed as 0x2. Modifying the same in this patch. Signed-off-by: NUma Shankar <uma.shankar@intel.com> Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-3-git-send-email-vidya.srinivas@intel.com
-
由 Uma Shankar 提交于
Panel GPIO control should be done based on platform. Add a check to restrict VLV and CHT specific GPIO confirguration, so that they dont apply to other platforms. The VBT spec fails to mention the PMIC backlight control option is valid only for VLV/CHT, and the field may be set to "PMIC" for BXT even if PMIC is not desired or possible. Signed-off-by: NUma Shankar <uma.shankar@intel.com> Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com> [Jani: amended commit message a bit and fixed indentation.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com
-
由 Manasi Navare 提交于
The max link parameters should be set/reset only on HPD or connected boot case or on system resume. Add a flag reset_link_params to intel_dp to decide when to reset the max link parameters. This prevents the parameters from getting reset/overwritten through all other connector->funcs->detect() calls. This is important when link training fails and the max link params are modified to the lower fallback values. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com
-
由 Chris Wilson 提交于
Make checkpatch happy and make the use of u32/u64 consistent throughout i915_gem_gtt.[ch] Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-23-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Use an invalid filp so that the aliasing_ppgtt can be clearly identified. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-22-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
As the aliasing GTT is only accessed via the global GTT, we will never use more of it than we expose via the Global GTT and so we only need to preallocate sufficient space within the ppgtt for the full GTT. Equally, if the aliasing GTT is smaller than the global GTT, we have a serious issue and must bail. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Once upon a time, back in the UMS days, we supported userspace initialising the GTT and sharing portions of the GTT with other users. Now, we own the GTT (both global and per-process) and the tables always start at 0 - so we can remove i915_address_space.start and forget about this old complication. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We never assign or use the ppgtt->enable() callback, so remove it. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-19-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The tracepoints are now entirely synonymous with binding and unbinding the VMA (and the tracepoints there). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-18-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We want to reload the PDP (and flush the TLB) when the addresses are changed. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-17-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The barrier here is not required - we apply the barrier before the range is ever reused by the GPU instead. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-16-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-13-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-12-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Stop passing around unused parameters makes the code more compact. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-11-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Upon creation of the va range, it is initialised to point at scratch. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-10-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The hardware does not cope very well with us changing the PD within an active context (the context must be idle for it to re-read the PD). As we only check whether the page is idle before changing the entry (and on through the PD tree), we cannot reliably replace PD entries on gen6/gen7. To fully avoid changing the tree at runtime, preallocate it on init. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-9-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
In the future, we need to call allocate_va_range on the aliasing-ppgtt which means moving the call down from the vma into the vm (which is more appropriate for calling the vm function). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-8-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
As these are now both plain and simple kmap_atomic/kunmap_atomic pairs, we can remove the wrappers for a small gain of clarity (in particular, not hiding the atomic critical sections!). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-7-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We flush the entire page every time we update a few bytes, making the update of a page table many, many times slower than is required. If we create a WC map of the page for our updates, we can avoid the clflush but incur additional cost for creating the pagetable. We amoritize that cost by reusing page vmappings, and only changing the page protection in batches. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
-
由 Chris Wilson 提交于
Similar to how we already split the bind_vma for ggtt/aliasing_gtt, also split up the unbind for symmetry. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-5-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The aliasing_ppgtt is a regular ppgtt, and we can use the regular i915_ppgtt_put() to properly tear it down. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-4-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Improve the sg iteration and in hte process eliminate a bug in miscomputing the pml4 length as orig_nents<<PAGE_SHIFT is no longer the full length of the sg table. v2: Check for the end of the fourth level page table (the final pdpe) and move onto the next. v3: Assert that 3lvl insert_pte_entries doesn't overflow its smaller set of PDP. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-3-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Inline the address computation to avoid the vfunc call for every page. We still have to pay the high overhead of sg_page_iter_next(), but now at least GCC can optimise the inner most loop, giving a significant boost to some thrashing Unreal Engine workloads. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The predominant VMA class is normal GTT, so allow gcc to emphasize that path and avoid unnecessary stack movement. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-1-chris@chris-wilson.co.uk
-
由 Hans de Goede 提交于
If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation for a vbt in mailbox #4 for this. This fixes the driver not finding the VBT on a jumper ezpad mini3 cherrytrail tablet and on a ACER SW5_017 machine. Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com
-
由 Tvrtko Ursulin 提交于
intel_ring_workarounds_emit is exactly the same code. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170214150017.16058-1-tvrtko.ursulin@linux.intel.com
-
由 Chris Wilson 提交于
Currently we apply the jump to rpe if we are below it and the GPU needs more power. For some GPUs, the rpe is 75% of the maximum range causing us to dramatically overshoot low power applications *and* unable to reach the low frequency that can most efficiently deliver their workload. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-3-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
由 Chris Wilson 提交于
If we receive a DOWN_TIMEOUT rps interrupt, we respond by reducing the GPU clocks significantly. Before we do, double check that the frequency we pick is actually a decrease. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-2-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
由 Chris Wilson 提交于
When the RPS tuning was applied to Baytrail, in commit 8fb55197 ("drm/i915: Agressive downclocking on Baytrail"), concern was given that it might cause Cherryview excess wakeups of the common power well. However, the static thresholds perform poorly for Kodi, and the GPU is unable to deliver the video frames on time. Enabling the dynamic, finer thresholds used on all other platforms (including Skylake and Broxton that also have the same multiple powerwell concerns) allows the GPU to pick a more appropriate frequency and not drop frames. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-1-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
由 Chris Wilson 提交于
Once upon a time before we had automated GPU state capture upon hangs, we had intel_gpu_dump. Now we come almost full circle and reinstate that view of the current GPU queues and registers by using the error capture facility to snapshot the GPU state when debugfs/.../i915_gpu_info is opened - which should provided useful debugging to both the error capture routines (without having to cause a hang and avoid the error state being eaten by igt) and generally. v2: Rename drm_i915_error_state to i915_gpu_state to alleviate some name collisions between the error state dump and inspecting the gpu state. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170214164611.11381-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We no longer need to take the struct_mutex for freeing objects, and on the finalisation paths here the mutex is not been used for serialisation of the pointer access, so remove the BKL wart. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170214133420.7977-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Chris Wilson 提交于
In general, the compiler should not be able to detect if we do any passes through the test loops: In file included from drivers/gpu/drm/i915/i915_gem.c:5029: drivers/gpu/drm/i915/selftests/i915_gem_coherency.c: In function 'igt_gem_coherency': drivers/gpu/drm/i915/selftests/i915_gem_coherency.c:274: error: 'err' may be used uninitialized in this function Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170214143509.15719-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
-
由 Chris Wilson 提交于
gcc-4.7 spotted that In file included from drivers/gpu/drm/i915/i915_gem_gtt.c:3791:0: drivers/gpu/drm/i915/selftests/i915_gem_gtt.c: In function ‘pot_hole’: drivers/gpu/drm/i915/selftests/i915_gem_gtt.c:594:6: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized] So set it to 0 should we ever skip over a hole smaller than a few pages. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170214113756.27834-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
-
由 Chris Wilson 提交于
When using the mock_ppgtt selftest, the GTT is large enough to cause an overflow in pot_hole() when adding 2 pages to the address. Avoid the overflow by computing the final valid address and iterating up to that address. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170214092344.12330-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
-