- 01 10月, 2010 1 次提交
-
-
由 Jens Axboe 提交于
Revert "block: set the bounce_pfn to the actual DMA limit rather than to max memory" This reverts commit c49825fa. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 25 9月, 2010 2 次提交
-
-
由 Mark Lord 提交于
Ensure that 'sysctl_hung_task_timeout_secs' is defined even when CONFIG_DETECT_HUNG_TASK is not set. This way we can safely reference it without need for ifdefs in the code elsewhere. eg. in block/blk-exec.c Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Malahal Naineni 提交于
The bounce_pfn of the request queue in 64 bit systems is set to the current max_low_pfn. Adding more memory later makes this incorrect. Memory allocated beyond this boot time max_low_pfn appear to require bounce buffers (bounce buffers are actually not allocated but used in calculating segments that may result in "over max segments limit" errors). Signed-off-by: NMalahal Naineni <malahal@us.ibm.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 24 9月, 2010 1 次提交
-
-
由 Mark Lord 提交于
During long I/O operations, the hang_check timer may fire, trigger stack dumps that unnecessarily alarm the user. Eg. hdparm --security-erase NULL /dev/sdb ## can take *hours* to complete So, if hang_check is armed, we should wake up periodically to prevent it from triggering. This patch uses a wake-up interval equal to half the hang_check timer period, which keeps overhead low enough. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 20 9月, 2010 1 次提交
-
-
由 Corrado Zoccolo 提交于
Fsync performance for small files achieved by cfq on high-end disks is lower than what deadline can achieve, due to idling introduced between the sync write happening in process context and the journal commit. Moreover, when competing with a sequential reader, a process writing small files and fsync-ing them is starved. This patch fixes the two problems by: - marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE flag set, - force all queues that have REQ_NOIDLE requests to be put in the noidle tree. Having the queue associated to the fsync-ing process and the one associated to journal commits in the noidle tree allows: - switching between them without idling, - fairness vs. competing idling queues, since they will be serviced only after the noidle tree expires its slice. Acked-by: NVivek Goyal <vgoyal@redhat.com> Reviewed-by: NJeff Moyer <jmoyer@redhat.com> Tested-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NCorrado Zoccolo <czoccolo@gmail.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 17 9月, 2010 2 次提交
-
-
由 Jens Axboe 提交于
When CONFIG_BLOCK is not enabled: init/do_mounts.c:71: error: implicit declaration of function 'dev_to_part' init/do_mounts.c:71: warning: initialization makes pointer from integer without a cast init/do_mounts.c:73: error: dereferencing pointer to incomplete type init/do_mounts.c:76: error: dereferencing pointer to incomplete type init/do_mounts.c:76: error: dereferencing pointer to incomplete type init/do_mounts.c:102: error: implicit declaration of function 'part_pack_uuid' init/do_mounts.c:104: error: 'block_class' undeclared (first use in this function) Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Signed-off-by: Jan Kara 提交于
When a new disk is being discovered, add_disk() first ties the bdev to gendisk (via register_disk()->blkdev_get()) and only after that calls bdi_register_bdev(). Because register_disk() also creates disk's kobject, it can happen that userspace manages to open and modify the device's data (or inode) before its BDI is properly initialized leading to a warning in __mark_inode_dirty(). Fix the problem by registering BDI early enough. This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=16312 Cc: stable@kernel.org Reported-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 16 9月, 2010 9 次提交
-
-
由 Vivek Goyal 提交于
o Documentation update Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o core logic of implementing IOPS throttling. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o cgroup changes for IOPS throttling rules. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o Actual implementation of throttling policy in block layer. Currently it implements READ and WRITE bytes per second throttling logic. IOPS throttling comes in later patches. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o cgroup chagnes for throttle policy. o Introduces READ and WRITE bytes per second throttling rules. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o This patch prepares the base for introducing new IO control policies. Currently all the code is written knowing there is only one policy and that is proportional bandwidth. Creating infrastructure for newer policies to come in. o Also there were many functions which were generated using macro. It was very confusing. Got rid of those. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Vivek Goyal 提交于
o Kill extra "dev weight" header which is printed when somebody reads blkio.weight_device file. This really seems to be out of convention. No other blkio files are printing any header at the start of file. I think it is ok to just print values and how to interpret values should be part of documentation. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
It is also called outside the scope of init functions. Stephen reports: WARNING: init/mounts.o(.text+0x21a): Section mismatch in reference from the function name_to_dev_t() to the function .init.text:match_dev_by_uuid() The function name_to_dev_t() references the function __init match_dev_by_uuid(). This is often because name_to_dev_t lacks a __init annotation or the annotation of match_dev_by_uuid is wrong. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Namhyung Kim 提交于
2nd argument of blk_rq_aligned() has changed to 'unsigned long' by the previous commit 'block: fix an address space warning in blk-map.c'. That commit neglected to update a user of that function. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 15 9月, 2010 4 次提交
-
-
由 Will Drewry 提交于
This is the third patch in a series which adds support for storing partition metadata, optionally, off of the hd_struct. One major use for that data is being able to resolve partition by other identities than just the index on a block device. Device enumeration varies by platform and there's a benefit to being able to use something like EFI GPT's GUIDs to determine the correct block device and partition to mount as the root. This change adds that support to root= by adding support for the following syntax: root=PARTUUID=hex-uuid Signed-off-by: NWill Drewry <wad@chromium.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Will Drewry 提交于
This change extends the partition_meta_info structure to support EFI GPT-specific metadata and ensures that data is copied in on partition scanning. Signed-off-by: NWill Drewry <wad@chromium.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Will Drewry 提交于
I'm reposting this patch series as v4 since there have been no additional comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches are against Linus's tree: 2bfc96a1 (2.6.36-rc3). Would this patchset be suitable for inclusion in an mm branch? This changes adds a partition_meta_info struct which itself contains a union of structures that provide partition table specific metadata. This change leaves the union empty. The subsequent patch includes an implementation for CONFIG_EFI_PARTITION-based metadata. Signed-off-by: NWill Drewry <wad@chromium.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Namhyung Kim 提交于
Change type of 2nd parameter of blk_rq_aligned() into unsigned long and remove unnecessary casting. Now we can call it with 'uaddr' instead of 'ubuf' in __blk_rq_map_user() so that it can remove following warnings from sparse: block/blk-map.c:57:31: warning: incorrect type in argument 2 (different address spaces) block/blk-map.c:57:31: expected void *addr block/blk-map.c:57:31: got void [noderef] <asn:1>*ubuf However blk_rq_map_kern() needs one more local variable to handle it. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 14 9月, 2010 1 次提交
-
-
由 San Mehat 提交于
Signed-off-by: NSan Mehat <san@android.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 11 9月, 2010 3 次提交
-
-
由 Christof Schmitt 提交于
When sending DIX integrity segments with an I/O request, the restriction for the maximum number of segments is still the same for the zfcp hardware. Report the new sg_prot_tablesize for the SCSI host, so that the number of integrity segments plus the number of data segments is not larger than the hardware limit. This results in using half of the hardware segments for integrity data and the other half for regular data. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>
-
由 Martin K. Petersen 提交于
Some controllers have a hardware limit on the number of protection information scatter-gather list segments they can handle. Introduce a max_integrity_segments limit in the block layer and provide a new scsi_host_template setting that allows HBA drivers to provide a value suitable for the hardware. Add support for honoring the integrity segment limit when merging both bios and requests. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>
-
由 Martin K. Petersen 提交于
We have several users of min_not_zero, each of them using their own definition. Move the define to kernel.h. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>
-
- 23 8月, 2010 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: free irq source id in handling error path KVM: destroy workqueue on kvm_create_pit() failures KVM: fix poison overwritten caused by using wrong xstate size
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits) drm/i915,intel_agp: Add support for Sandybridge D0 drm/i915: fix render pipe control notify on sandybridge agp/intel: set 40-bit dma mask on Sandybridge drm/i915: Remove the conflicting BUG_ON() drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/ drm/i915/suspend: Flush register writes before busy-waiting. i915: disable DAC on Ironlake also when doing CRT load detection. drm/i915: wait for actual vblank, not just 20ms drm/i915: make sure eDP PLL is enabled at the right time drm/i915: fix VGA plane disable for Ironlake+ drm/i915: eDP mode set sequence corrections drm/i915: add panel reset workaround drm/i915: Enable RC6 on Ironlake. drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode. drm/i915: Set up a render context on Ironlake drm/i915 invalidate indirect state pointers at end of ring exec drm/i915: Wake-up wait_request() from elapsed hang-check (v2) drm/i915: Apply i830 errata for cursor alignment drm/i915: Only update i845/i865 CURBASE when disabled (v2) drm/i915: FBC is updated within set_base() so remove second call in mode_set() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: fix object alignment slub: add missing __percpu markup in mm/slub_def.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: wait for discard to finish
-
- 22 8月, 2010 11 次提交
-
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
This one is missed in last pipe control fix for sandybridge, that really unmask interrupt bit for notify in render engine IMR. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
We now attempt to free "active" objects following a GPU hang as either the GPU will be reset or the hang is permenant. In either case, the GPU writes will not be flushed to main memory and it should be safe to return that memory back to the system. The BUG_ON(active) is thus overkill and can erroneously fire after a EIO. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
For the shared paths on the next generation chipsets. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Dave Airlie 提交于
Like on Sandybridge, disabling the DAC here when doing CRT load detect avoids forever hangs waiting on the hardware. test procedure on HP 2740p: boot with no VGA plugged in, start X, plug in VGA monitor (1280x1024) chvt 3 machine hangs waiting forever. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Jesse Barnes 提交于
Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Arjan van de Ven 提交于
With the introduction of the new unified work queue thread pools, we lost one feature: It's no longer possible to know which worker is causing the CPU to wake out of idle. The result is that PowerTOP now reports a lot of "kworker/a:b" instead of more readable results. This patch adds a pair of tracepoints to the new workqueue code, similar in style to the timer/hrtimer tracepoints. With this pair of tracepoints, the next PowerTOP can correctly report which work item caused the wakeup (and how long it took): Interrupt (43) i915 time 3.51ms wakeups 141 Work ieee80211_iface_work time 0.81ms wakeups 29 Work do_dbs_timer time 0.55ms wakeups 24 Process Xorg time 21.36ms wakeups 4 Timer sched_rt_period_timer time 0.01ms wakeups 1 Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: mtd: nand: Fix probe of Samsung NAND chips mtd: nand: Fix regression in BBM detection pxa3xx: fix ns2cycle equation
-
由 Samuel Thibault 提交于
The "Configure" word tends to make user believe they have to say 'yes' to be able to choose the number of procs/nodes. "Enable" should be unambiguous enough. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-