- 25 7月, 2012 15 次提交
-
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
that needs for a successful mount through SMB2 protocol. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
and rename variables in cifs_mount. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
and add negotiate request type to let set_credits know that we are only on negotiate stage and no need to make a decision about disabling echos and oplocks. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Use SMB2 header size values for allocation and memset because they are bigger and suitable for both CIFS and SMB2. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Now we can process SMB2 messages: check message, get message id and wakeup awaiting routines. Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Commit 30d90494 caused a regression in cifs open codepath. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 24 7月, 2012 19 次提交
-
-
由 Pavel Shilovsky 提交于
For SMB2 protocol we can add more than one credit for one received request: it depends on CreditRequest field in SMB2 response header. Also we divide all requests by type: echoes, oplocks and others. Each type uses its own slot pull. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Steve French 提交于
Add mapping table for 32 bit SMB2 status codes to linux errors. Note that SMB2 does not use DOS/OS2 errors (ever) so mapping to DOS/OS2 errors as a common network subset (as we do for cifs) doesn't help. And note that the set of status codes is much more complete here. Signed-off-by: NSteve French <sfrench@us.ibm.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
and consider such codes as CIFS errors. Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
and rename variables around the code changes. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Split all requests to echos, oplocks and others - each group uses its own credit slot. This is indicated by new flags CIFS_ECHO_OP and CIFS_OBREAK_OP that are not used now for CIFS. This change is required to support SMB2 protocol because of different processing of these commands. Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
sec=ntlmv2 as a mount option got dropped in the mount option overhaul. Cc: Sachin Prabhu <sprabhu@redhat.com> Cc: <stable@vger.kernel.org> # 3.4+ Reported-by: NGünter Kukkukk <linux@kukkukk.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
"smb2" makes me think of the SMB2.x protocol, which isn't at all what this function is for... Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
There's a comment here about how we don't want to modify this length, but nothing in this function actually does. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
struct file_lock is pretty large, so we really don't want that on the stack in a potentially long call chain. Reorganize the arguments to CIFSSMBPosixLock to eliminate the need for that. Eliminate the get_flag and simply use a non-NULL pLockInfo to indicate that this is a "get" operation. In order to do that, need to add a new loff_t argument for the start_offset. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Those macros add a newline on their own, so there's not any need to embed one in the message itself. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Calling key_revoke here isn't ideal as further requests for the key will end up returning -EKEYREVOKED until it gets purged from the cache. What we really intend here is to force a new upcall on the next request_key. Cc: David Howells <dhowells@redhat.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 J. Bruce Fields 提交于
The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.) are done after converting the long to an int. Thus some illegal values may be let through and cause problems in later code. [ They actually *don't* cause problems in mainline, as of Dave Jones's commit 8d657eb3 "Remove easily user-triggerable BUG from generic_setlease", but we should fix this anyway. And this patch will be necessary to fix real bugs on earlier kernels. ] Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull the big VFS changes from Al Viro: "This one is *big* and changes quite a few things around VFS. What's in there: - the first of two really major architecture changes - death to open intents. The former is finally there; it was very long in making, but with Miklos getting through really hard and messy final push in fs/namei.c, we finally have it. Unlike his variant, this one doesn't introduce struct opendata; what we have instead is ->atomic_open() taking preallocated struct file * and passing everything via its fields. Instead of returning struct file *, it returns -E... on error, 0 on success and 1 in "deal with it yourself" case (e.g. symlink found on server, etc.). See comments before fs/namei.c:atomic_open(). That made a lot of goodies finally possible and quite a few are in that pile: ->lookup(), ->d_revalidate() and ->create() do not get struct nameidata * anymore; ->lookup() and ->d_revalidate() get lookup flags instead, ->create() gets "do we want it exclusive" flag. With the introduction of new helper (kern_path_locked()) we are rid of all struct nameidata instances outside of fs/namei.c; it's still visible in namei.h, but not for long. Come the next cycle, declaration will move either to fs/internal.h or to fs/namei.c itself. [me, miklos, hch] - The second major change: behaviour of final fput(). Now we have __fput() done without any locks held by caller *and* not from deep in call stack. That obviously lifts a lot of constraints on the locking in there. Moreover, it's legal now to call fput() from atomic contexts (which has immediately simplified life for aio.c). We also don't need anti-recursion logics in __scm_destroy() anymore. There is a price, though - the damn thing has become partially asynchronous. For fput() from normal process we are guaranteed that pending __fput() will be done before the caller returns to userland, exits or gets stopped for ptrace. For kernel threads and atomic contexts it's done via schedule_work(), so theoretically we might need a way to make sure it's finished; so far only one such place had been found, but there might be more. There's flush_delayed_fput() (do all pending __fput()) and there's __fput_sync() (fput() analog doing __fput() immediately). I hope we won't need them often; see warnings in fs/file_table.c for details. [me, based on task_work series from Oleg merged last cycle] - sync series from Jan - large part of "death to sync_supers()" work from Artem; the only bits missing here are exofs and ext4 ones. As far as I understand, those are going via the exofs and ext4 trees resp.; once they are in, we can put ->write_super() to the rest, along with the thread calling it. - preparatory bits from unionmount series (from dhowells). - assorted cleanups and fixes all over the place, as usual. This is not the last pile for this cycle; there's at least jlayton's ESTALE work and fsfreeze series (the latter - in dire need of fixes, so I'm not sure it'll make the cut this cycle). I'll probably throw symlink/hardlink restrictions stuff from Kees into the next pile, too. Plus there's a lot of misc patches I hadn't thrown into that one - it's large enough as it is..." * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits) ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file() btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file() switch dentry_open() to struct path, make it grab references itself spufs: shift dget/mntget towards dentry_open() zoran: don't bother with struct file * in zoran_map ecryptfs: don't reinvent the wheels, please - use struct completion don't expose I_NEW inodes via dentry->d_inode tidy up namei.c a bit unobfuscate follow_up() a bit ext3: pass custom EOF to generic_file_llseek_size() ext4: use core vfs llseek code for dir seeks vfs: allow custom EOF in generic_file_llseek code vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes vfs: Remove unnecessary flushing of block devices vfs: Make sys_sync writeout also block device inodes vfs: Create function for iterating over block devices vfs: Reorder operations during sys_sync quota: Move quota syncing to ->sync_fs method quota: Split dquot_quota_sync() to writeback and cache flushing part vfs: Move noop_backing_dev_info check from sync into writeback ...
-
- 23 7月, 2012 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
Pull MMC updates from Chris Ball: "MMC highlights for 3.6: Core: - Rename cd-gpio to slot-gpio and extend it to support more slot GPIO functions, such as write-protect. - Add a function to get regulators (Vdd and Vccq) for a host. Drivers: - sdhci-pxav2, sdhci-pxav3: Add device tree support. - sdhi: Add device tree support. - sh_mmcif: Add support for regulators, device tree, slot-gpio. - tmio: Add regulator support, use slot-gpio." * tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (62 commits) mmc: sdhci-dove: Prepare for common clock framework mmc: sdhci-dove: Add SDHCI_QUIRK_NO_HISPD_BIT mmc: omap_hsmmc: ensure probe returns error upon resource failure mmc: mxs-mmc: Add wp-inverted property mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access mmc: core: reset signal voltage on power up mmc: sd: Fix sd current limit setting mmc: omap_hsmmc: add clk_prepare and clk_unprepare mmc: sdhci: When a UHS switch fails, cycle power if regulator is used mmc: atmel-mci: modify CLKDIV displaying in debugfs mmc: atmel-mci: fix incorrect setting of host->data to NULL mmc: sdhci: poll for card even when card is logically unremovable mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER mmc: sdio: Change pr_warning to pr_warn_ratelimited mmc: core: Simplify and fix for SD switch processing mmc: sdhci: restore host settings when card is removed mmc: sdhci: fix incorrect command used in tuning mmc: sdhci-pci: CaFe has broken card detection mmc: sdhci: Report failure reasons for all cases in sdhci_add_host() mmc: s3cmci: Convert s3cmci driver to gpiolib API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/mce changes from Ingo Molnar: "This tree improves the AMD thresholding bank code and includes a memory fault signal handling fixlet." * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix siginfo_t->si_addr value for non-recoverable memory faults x86, MCE, AMD: Update copyrights and boilerplate x86, MCE, AMD: Give proper names to the thresholding banks x86, MCE, AMD: Make error_count read only x86, MCE, AMD: Cleanup reading of error_count x86, MCE, AMD: Print decimal thresholding values x86, MCE, AMD: Move shared bank to node descriptor x86, MCE, AMD: Remove local_allocate_... wrapper x86, MCE, AMD: Remove shared banks sysfs linking x86, amd_nb: Export model 0x10 and later PCI id
-
由 Sebastian Hesselbarth 提交于
As mach-dove is moving towards common clock framework prepare the sdhci driver to grab its clock. Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Sebastian Hesselbarth 提交于
The sdio controller on dove doesn't have a bit to indicate high-speed. With the quirk set it fixes accessing high-speed sdcards. Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Kevin Hilman 提交于
If platform_get_resource_by_name() fails, driver probe is aborted an should return an error so the driver is not bound to the device. However, in the current error path of platform_get_resource_by_name(), probe returns zero since the return value (ret) is not properly set. With a zero return value, the driver core assumes probe was successful and will bind the driver to the device. Fix this by ensuring that probe returns an error code in this failure path. Signed-off-by: NKevin Hilman <khilman@ti.com> Acked-by: NVenkatraman S <svenkatr@ti.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Marek Vasut 提交于
The write-protect GPIO is inverted on some boards. Handle such case. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-