[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ]

spc5r17.pdf specifies:

  4.3.1 ASCII data field requirements
  ASCII data fields shall contain only ASCII printable characters (i.e.,
  code values 20h to 7Eh) and may be terminated with one or more ASCII null
  (00h) characters.  ASCII data fields described as being left-aligned
  shall have any unused bytes at the end of the field (i.e., highest
  offset) and the unused bytes shall be filled with ASCII space characters
  (20h).

LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT
IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT
REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR
IDENTIFICATION field in the INQUIRY Device Identification VPD Page are
zero-terminated/zero-padded.

Fix this inconsistency by using space-padding for all of the above fields.
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0fbe82e628c817e292ff588cd5847fc935e025f2 ]

after set SO_DONTROUTE to 1, the IP layer should not route packets if
the dest IP address is not in link scope. But if the socket has cached
the dst_entry, such packets would be routed until the sk_dst_cache
expires. So we should clean the sk_dst_cache when a user set
SO_DONTROUTE option. Below are server/client python scripts which
could reprodue this issue:

server side code:

==========================================================================
import socket
import struct
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind(('0.0.0.0', 9000))
s.listen(1)
sock, addr = s.accept()
sock.setsockopt(socket.SOL_SOCKET, socket.SO_DONTROUTE, struct.pack('i', 1))
while True:
    sock.send(b'foo')
    time.sleep(1)
==========================================================================

client side code:
==========================================================================
import socket
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('server_address', 9000))
while True:
    data = s.recv(1024)
    print(data)
==========================================================================
Signed-off-by: Nyupeng <yupeng0921@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 848bd9acdcd00c164b42b14aacec242949ecd471 ]

The root cause is the race as follows:
 Thread #0                         Thread #1

 z_erofs_vle_unzip_kickoff         z_erofs_submit_and_unzip

                                    struct z_erofs_vle_unzip_io io[]
   atomic_add_return()
                                    wait_event()
                                    [end of function]
   wake_up()

Fix it by taking the waitqueue lock between atomic_add_return and
wake_up to close such the race.

kernel message:

Unable to handle kernel paging request at virtual address 97f7052caa1303dc
...
Workqueue: kverityd verity_work
task: ffffffe32bcb8000 task.stack: ffffffe3298a0000
PC is at __wake_up_common+0x48/0xa8
LR is at __wake_up+0x3c/0x58
...
Call trace:
...
[<ffffff94a08ff648>] __wake_up_common+0x48/0xa8
[<ffffff94a08ff8b8>] __wake_up+0x3c/0x58
[<ffffff94a0c11b60>] z_erofs_vle_unzip_kickoff+0x40/0x64
[<ffffff94a0c118e4>] z_erofs_vle_read_endio+0x94/0x134
[<ffffff94a0c83c9c>] bio_endio+0xe4/0xf8
[<ffffff94a1076540>] dec_pending+0x134/0x32c
[<ffffff94a1076f28>] clone_endio+0x90/0xf4
[<ffffff94a0c83c9c>] bio_endio+0xe4/0xf8
[<ffffff94a1095024>] verity_work+0x210/0x368
[<ffffff94a08c4150>] process_one_work+0x188/0x4b4
[<ffffff94a08c45bc>] worker_thread+0x140/0x458
[<ffffff94a08cad48>] kthread+0xec/0x108
[<ffffff94a0883ab4>] ret_from_fork+0x10/0x1c
Code: d1006273 54000260 f9400804 b9400019 (b85fc081)
---[ end trace be9dde154f677cd1 ]---
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NGao Xiang <gaoxiang25@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit de2563bce7a157f5296bab94f3843d7d64fb14b4 ]

Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:

[  460.308650] ------------[ cut here ]------------
[  460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536]
[  460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254
[  460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev
[  460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G        W         4.19.1 #82
[  460.384223] Hardware name: Google Cheza (rev1) (DT)
[  460.389251] pstate: 60400009 (nZCv daif +PAN -UAO)
[  460.394191] pc : debug_dma_map_sg+0x174/0x254
[  460.398680] lr : debug_dma_map_sg+0x174/0x254
[  460.403162] sp : ffffff80200c37d0
[  460.406583] x29: ffffff80200c3830 x28: 0000000000010000
[  460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80
[  460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290
[  460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290
[  460.428470] x21: ffffff8009037000 x20: 0000000000000001
[  460.433936] x19: ffffff80091b0000 x18: 0000000000000000
[  460.439411] x17: 0000000000000000 x16: 000000000000f251
[  460.444885] x15: 0000000000000006 x14: 0720072007200720
[  460.450354] x13: ffffff800af536e0 x12: 0000000000000000
[  460.455822] x11: 0000000000000000 x10: 0000000000000000
[  460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00
[  460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80
[  460.472230] x5 : 0000000000000000 x4 : 0000000000000000
[  460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948
[  460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a
[  460.488640] Call trace:
[  460.491165]  debug_dma_map_sg+0x174/0x254
[  460.495307]  vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg]
[  460.501150]  __vb2_queue_alloc+0x164/0x374 [videobuf2_common]
[  460.507076]  vb2_core_reqbufs+0xfc/0x23c [videobuf2_common]
[  460.512815]  vb2_reqbufs+0x44/0x5c [videobuf2_v4l2]
[  460.517853]  v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem]
[  460.523144]  v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem]
[  460.528976]  v4l_reqbufs+0x30/0x40
[  460.532480]  __video_do_ioctl+0x36c/0x454
[  460.536610]  video_usercopy+0x25c/0x51c
[  460.540572]  video_ioctl2+0x38/0x48
[  460.544176]  v4l2_ioctl+0x60/0x74
[  460.547602]  do_video_ioctl+0x948/0x3520
[  460.551648]  v4l2_compat_ioctl32+0x60/0x98
[  460.555872]  __arm64_compat_sys_ioctl+0x134/0x20c
[  460.560718]  el0_svc_common+0x9c/0xe4
[  460.564498]  el0_svc_compat_handler+0x2c/0x38
[  460.568982]  el0_svc_compat+0x8/0x18
[  460.572672] ---[ end trace ce209b87b2f3af88 ]---

>From above warning one would deduce that the sg segment will overflow
the device's capacity. In reality, the hardware can accommodate larger
sg segments.
So, initialize the max segment size properly to weed out this warning.

Based on a similar patch sent by Sean Paul for mdss:
https://patchwork.kernel.org/patch/10671457/Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 23aa128bb28d9da69bb1bdb2b70e50128857884a ]

AMD platform device acp_audio_dma can only be created by parent PCI
device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct
device of the parent to snd_pcm_lib_preallocate_pages() so
dma_alloc_coherent() can use correct dma_ops. Otherwise, it will
use default dma_ops which is nommu_dma_ops on x86_64 even when
IOMMU is enabled and set to non passthrough mode.

Though platform device inherits some dma related fields during its
creation in mfd_add_device(), we can't simply pass its struct device
to snd_pcm_lib_preallocate_pages() because dma_ops is not among the
inherited fields. Even it were, drivers/iommu/amd_iommu.c would
ignore it because get_device_id() doesn't handle platform device.

This change shouldn't give us any trouble even struct device of the
parent becomes null or represents some non PCI device in the future,
because get_dma_ops() correctly handles null struct device or uses
the default dma_ops if struct device doesn't have it set.
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b2e9a4eda11fd2cb1e6714e9ad3f455c402568ff ]

Clang warns:

drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_APP_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_CA_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
4 warnings generated.

Change app_info's type to unsigned char to match the type of the
member msg in struct ca_msg, which is the only thing passed into the
app_info parameter in this function.

Link: https://github.com/ClangBuiltLinux/linux/issues/105Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2b038cbc5fcf12a7ee1cc9bfd5da1e46dacdee87 ]

When booting a pseries kernel with PREEMPT enabled, it dumps the
following warning:

   BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
   caller is pseries_processor_idle_init+0x5c/0x22c
   CPU: 13 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc3-00090-g12201a0128bc-dirty #828
   Call Trace:
   [c000000429437ab0] [c0000000009c8878] dump_stack+0xec/0x164 (unreliable)
   [c000000429437b00] [c0000000005f2f24] check_preemption_disabled+0x154/0x160
   [c000000429437b90] [c000000000cab8e8] pseries_processor_idle_init+0x5c/0x22c
   [c000000429437c10] [c000000000010ed4] do_one_initcall+0x64/0x300
   [c000000429437ce0] [c000000000c54500] kernel_init_freeable+0x3f0/0x500
   [c000000429437db0] [c0000000000112dc] kernel_init+0x2c/0x160
   [c000000429437e20] [c00000000000c1d0] ret_from_kernel_thread+0x5c/0x6c

This happens because the code calls get_lppaca() which calls
get_paca() and it checks if preemption is disabled through
check_preemption_disabled().

Preemption should be disabled because the per CPU variable may make no
sense if there is a preemption (and a CPU switch) after it reads the
per CPU data and when it is used.

In this device driver specifically, it is not a problem, because this
code just needs to have access to one lppaca struct, and it does not
matter if it is the current per CPU lppaca struct or not (i.e. when
there is a preemption and a CPU migration).

That said, the most appropriate fix seems to be related to avoiding
the debug_smp_processor_id() call at get_paca(), instead of calling
preempt_disable() before get_paca().
Signed-off-by: NBreno Leitao <leitao@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8d4a862276a9c30a269d368d324fb56529e6d5fd ]

Currently xmon needs to get devtree_lock (through rtas_token()) during its
invocation (at crash time). If there is a crash while devtree_lock is being
held, then xmon tries to get the lock but spins forever and never get into
the interactive debugger, as in the following case:

	int *ptr = NULL;
	raw_spin_lock_irqsave(&devtree_lock, flags);
	*ptr = 0xdeadbeef;

This patch avoids calling rtas_token(), thus trying to get the same lock,
at crash time. This new mechanism proposes getting the token at
initialization time (xmon_init()) and just consuming it at crash time.

This would allow xmon to be possible invoked independent of devtree_lock
being held or not.
Signed-off-by: NBreno Leitao <leitao@debian.org>
Reviewed-by: NThiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 10e1fdb95809ed21406f53b5b4f064673a1b9ceb ]

Currently, disconnecting a USB webcam while it is in use prints out a
number of warnings, such as:

WARNING: CPU: 2 PID: 3118 at /build/linux-ezBi1T/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90
sysfs group ffffffffa7cd0780 not found for kobject 'event13'

This has been noticed before. [0]

This is because of the order in which things are torn down.

If there are no streams active during a USB disconnect:

 - uvc_disconnect() is invoked via device_del() through the bus
   notifier mechanism.

 - this calls uvc_unregister_video().

 - uvc_unregister_video() unregisters the video device for each
   stream,

 - because there are no streams open, it calls uvc_delete()

 - uvc_delete() calls uvc_status_cleanup(), which cleans up the status
   input device.

 - uvc_delete() calls media_device_unregister(), which cleans up the
   media device

 - uvc_delete(), uvc_unregister_video() and uvc_disconnect() all
   return, and we end up back in device_del().

 - device_del() then cleans up the sysfs folder for the camera with
   dpm_sysfs_remove(). Because uvc_status_cleanup() and
   media_device_unregister() have already been called, this all works
   nicely.

If, on the other hand, there *are* streams active during a USB disconnect:

 - uvc_disconnect() is invoked

 - this calls uvc_unregister_video()

 - uvc_unregister_video() unregisters the video device for each
   stream,

 - uvc_unregister_video() and uvc_disconnect() return, and we end up
   back in device_del().

 - device_del() then cleans up the sysfs folder for the camera with
   dpm_sysfs_remove(). Because the status input device and the media
   device are children of the USB device, this also deletes their
   sysfs folders.

 - Sometime later, the final stream is closed, invoking uvc_release().

 - uvc_release() calls uvc_delete()

 - uvc_delete() calls uvc_status_cleanup(), which cleans up the status
   input device. Because the sysfs directory has already been removed,
   this causes a WARNing.

 - uvc_delete() calls media_device_unregister(), which cleans up the
   media device. Because the sysfs directory has already been removed,
   this causes another WARNing.

To fix this, we need to make sure the devices are always unregistered
before the end of uvc_disconnect(). To this, move the unregistration
into the disconnect path:

 - split uvc_status_cleanup() into two parts, one on disconnect that
   unregisters and one on delete that frees.

 - move v4l2_device_unregister() and media_device_unregister() into
   the disconnect path.

[0]: https://lkml.org/lkml/2016/12/8/657

[Renamed uvc_input_cleanup() to uvc_input_unregister()]
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 30696378f68a9e3dad6bfe55938b112e72af00c2 ]

The ramoops backend currently calls persistent_ram_save_old() even
if a buffer is empty. While this appears to work, it is does not seem
like the right thing to do and could lead to future bugs so lets avoid
that. It also prevents misleading prints in the logs which claim the
buffer is valid.

I got something like:

	found existing buffer, size 0, start 0

When I was expecting:

	no valid data in buffer (sig = ...)

This bails out early (and reports with pr_debug()), since it's an
acceptable state.
Signed-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9e5ef7a57ca75a1b9411c46caeeb6881124284a3 ]

As the commit 2893c379 ("clk: make strings in parent name arrays
const"), let's make the parent strings const, otherwise we may meet
the following warning when compiling:

drivers/clk/imx/clk-imx7ulp.c: In function 'imx7ulp_clocks_init':
drivers/clk/imx/clk-imx7ulp.c:73:35: warning: passing argument 5 of
	'imx_clk_mux_flags' discards 'const' qualifier from pointer target type

  clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_mux_flags("apll_pre_sel", base + 0x508, 0,
	1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
                                   ^
In file included from drivers/clk/imx/clk-imx7ulp.c:23:0:
drivers/clk/imx/clk.h:200:27: note: expected 'const char **' but argument is
 of type 'const char * const*'
...

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a788c5272769ddbcdbab297cf386413eeac04463 ]

jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER
is defined then a write buffer is available and has been initialized.
However, this does is not the case when the mtd device has no
out-of-band buffer:

int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
        if (!c->mtd->oobsize)
                return 0;
...

The resulting call to cancel_delayed_work_sync passing a uninitialized
(but zeroed) delayed_work struct forces lockdep to become disabled.

[   90.050639] overlayfs: upper fs does not support tmpfile.
[   90.652264] INFO: trying to register non-static key.
[   90.662171] the code is fine but needs lockdep annotation.
[   90.673090] turning off the locking correctness validator.
[   90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0
[   90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7
[   90.713349]         80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff
[   90.730020]         00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420
[   90.746690]         6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90
[   90.763362]         80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000
[   90.780033]         ...
[   90.784902] Call Trace:
[   90.789793] [<8000f0d8>] show_stack+0xb8/0x148
[   90.798659] [<8005a000>] register_lock_class+0x270/0x55c
[   90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c
[   90.818964] [<8005e314>] lock_acquire+0x194/0x1dc
[   90.828345] [<8003f27c>] flush_work+0x200/0x24c
[   90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210
[   90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54
[   90.857173] [<80125cf4>] iterate_supers+0xf4/0x120
[   90.866729] [<80158fc4>] sys_sync+0x44/0x9c
[   90.875067] [<80014424>] syscall_common+0x34/0x58
Signed-off-by: NDaniel Santos <daniel.santos@pobox.com>
Reviewed-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3db5e0ba8b8f4aee631d7ee04b7a11c56cfdc213 ]

When building the kernel with Clang, some disabled warnings appear
because this Makefile overrides KBUILD_CFLAGS for x86{,_64}. Add them to
this list so that the build is clean again.

-Wpointer-sign was disabled for the whole kernel before the beginning of Git history.

-Waddress-of-packed-member was disabled for the whole kernel and for
the early boot code in these commits:

  bfb38988 ("kbuild: clang: Disable 'address-of-packed-member' warning")
  20c6c189 ("x86/boot: Disable the address-of-packed-member compiler warning").

-Wgnu was disabled for the whole kernel and for the early boot code in
these commits:

  61163efa ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang")
  6c3b56b1 ("x86/boot: Disable Clang warnings about GNU extensions").

 [ mingo: Made the changelog more readable. ]
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NSedat Dilek <sedat.dilek@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-8-ard.biesheuvel@linaro.org
Link: https://github.com/ClangBuiltLinux/linux/issues/112Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b024dd0eba6e6d568f69d63c5e3153aba94c23e3 ]

FRWR memory registration is done with a series of calls and WRs.
1. ULP invokes ib_dma_map_sg()
2. ULP invokes ib_map_mr_sg()
3. ULP posts an IB_WR_REG_MR on the Send queue

Step 2 generates an iova. It is permissible for ULPs to change this
iova (with certain restrictions) between steps 2 and 3.

rxe_map_mr_sg captures the MR's iova but later when rxe processes the
REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova
after step 2 but before step 3, rxe never captures that change.

When the remote sends an RDMA Read targeting that MR, rxe looks up the
R_key, but the altered iova does not match the iova stored in the MR,
causing the RDMA Read request to fail.
Reported-by: NAnna Schumaker <schumaker.anna@gmail.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b34c14fd50c302db091f020f26dd00ede902c80 ]

As amd_uvd_resume() accesses the uvd ring, it must be initialised first
or else we trigger errors like:

[    5.595963] [drm] Found UVD firmware Version: 1.87 Family ID: 17
[    5.595969] [drm] PSP loading UVD firmware
[    5.596266] ------------[ cut here ]------------
[    5.596268] ODEBUG: assert_init not available (active state 0) object type: timer_list hint:           (null)
[    5.596285] WARNING: CPU: 0 PID: 507 at lib/debugobjects.c:329 debug_print_object+0x6a/0x80
[    5.596286] Modules linked in: amdgpu(+) hid_logitech_hidpp(+) chash gpu_sched amd_iommu_v2 ttm drm_kms_helper crc32c_intel drm hid_sony ff_memless igb hid_logitech_dj nvme dca i2c_algo_bit nvme_core wmi pinctrl_amd uas usb_storage
[    5.596299] CPU: 0 PID: 507 Comm: systemd-udevd Tainted: G        W         4.20.0-0.rc1.git4.1.fc30.x86_64 #1
[    5.596301] Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 0901 07/23/2018
[    5.596303] RIP: 0010:debug_print_object+0x6a/0x80
[    5.596305] Code: 8b 43 10 83 c2 01 8b 4b 14 4c 89 e6 89 15 e6 82 b0 02 4c 8b 45 00 48 c7 c7 60 fd 34 a6 48 8b 14 c5 a0 da 08 a6 e8 6a 6a b8 ff <0f> 0b 5b 83 05 d0 45 3e 01 01 5d 41 5c c3 83 05 c5 45 3e 01 01 c3
[    5.596306] RSP: 0018:ffffa02ac863f8c0 EFLAGS: 00010282
[    5.596307] RAX: 0000000000000000 RBX: ffffa02ac863f8e0 RCX: 0000000000000006
[    5.596308] RDX: 0000000000000007 RSI: ffff9160e9a7bfe8 RDI: ffff9160f91d6c60
[    5.596310] RBP: ffffffffa6742740 R08: 0000000000000002 R09: 0000000000000000
[    5.596311] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa634ff69
[    5.596312] R13: 00000000000b79d0 R14: ffffffffa80f76d8 R15: 0000000000266000
[    5.596313] FS:  00007f762abf7940(0000) GS:ffff9160f9000000(0000) knlGS:0000000000000000
[    5.596314] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.596315] CR2: 000055fdc593f000 CR3: 00000007e999c000 CR4: 00000000003406f0
[    5.596317] Call Trace:
[    5.596321]  debug_object_assert_init+0x14a/0x180
[    5.596327]  del_timer+0x2e/0x90
[    5.596383]  amdgpu_fence_process+0x47/0x100 [amdgpu]
[    5.596430]  amdgpu_uvd_resume+0xf6/0x120 [amdgpu]
[    5.596475]  uvd_v7_0_sw_init+0xe0/0x280 [amdgpu]
[    5.596523]  amdgpu_device_init.cold.30+0xf97/0x14b6 [amdgpu]
[    5.596563]  ? amdgpu_driver_load_kms+0x53/0x330 [amdgpu]
[    5.596604]  amdgpu_driver_load_kms+0x86/0x330 [amdgpu]
[    5.596614]  drm_dev_register+0x115/0x150 [drm]
[    5.596654]  amdgpu_pci_probe+0xbd/0x120 [amdgpu]
[    5.596658]  local_pci_probe+0x41/0x90
[    5.596661]  pci_device_probe+0x188/0x1a0
[    5.596666]  really_probe+0xf8/0x3b0
[    5.596669]  driver_probe_device+0xb3/0xf0
[    5.596672]  __driver_attach+0xe1/0x110
[    5.596674]  ? driver_probe_device+0xf0/0xf0
[    5.596676]  bus_for_each_dev+0x79/0xc0
[    5.596679]  bus_add_driver+0x155/0x230
[    5.596681]  ? 0xffffffffc07d9000
[    5.596683]  driver_register+0x6b/0xb0
[    5.596685]  ? 0xffffffffc07d9000
[    5.596688]  do_one_initcall+0x5d/0x2be
[    5.596691]  ? rcu_read_lock_sched_held+0x79/0x80
[    5.596693]  ? kmem_cache_alloc_trace+0x264/0x290
[    5.596695]  ? do_init_module+0x22/0x210
[    5.596698]  do_init_module+0x5a/0x210
[    5.596701]  load_module+0x2137/0x2430
[    5.596703]  ? lockdep_hardirqs_on+0xed/0x180
[    5.596714]  ? __do_sys_init_module+0x150/0x1a0
[    5.596715]  __do_sys_init_module+0x150/0x1a0
[    5.596722]  do_syscall_64+0x60/0x1f0
[    5.596725]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[    5.596726] RIP: 0033:0x7f762b877dee
[    5.596728] Code: 48 8b 0d 9d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6a 20 0c 00 f7 d8 64 89 01 48
[    5.596729] RSP: 002b:00007ffc777b8558 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    5.596730] RAX: ffffffffffffffda RBX: 000055fdc48da320 RCX: 00007f762b877dee
[    5.596731] RDX: 00007f762b9f284d RSI: 00000000006c5fc6 RDI: 000055fdc527a060
[    5.596732] RBP: 00007f762b9f284d R08: 0000000000000003 R09: 0000000000000002
[    5.596733] R10: 000055fdc48ad010 R11: 0000000000000246 R12: 000055fdc527a060
[    5.596734] R13: 000055fdc48dca20 R14: 0000000000020000 R15: 0000000000000000
[    5.596740] irq event stamp: 134618
[    5.596743] hardirqs last  enabled at (134617): [<ffffffffa513d52e>] console_unlock+0x45e/0x610
[    5.596744] hardirqs last disabled at (134618): [<ffffffffa50037e8>] trace_hardirqs_off_thunk+0x1a/0x1c
[    5.596746] softirqs last  enabled at (133146): [<ffffffffa5e00365>] __do_softirq+0x365/0x47c
[    5.596748] softirqs last disabled at (133139): [<ffffffffa50c64f9>] irq_exit+0x119/0x120
[    5.596749] ---[ end trace eaee508abfebccdc ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108709Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d5632b11f0a17efa6356311e535ae135d178438d ]

The kernel panic was observed after switch side perturbation,

BUG: unable to handle kernel NULL pointer dereference at (null)
     IP: [<ffffffff8132b5a0>] strcmp+0x20/0x40
     PGD 0 Oops: 0000 [#1] SMP
CPU: 8 PID: 647 Comm: kworker/8:1 Tainted: G        W  OE  ------------   3.10.0-693.el7.x86_64 #1
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018
Workqueue: slowpath-13:00. qed_slowpath_task [qed]
task: ffff880429eb8fd0 ti: ffff880429190000 task.ti: ffff880429190000
RIP: 0010:[<ffffffff8132b5a0>]  [<ffffffff8132b5a0>] strcmp+0x20/0x40
RSP: 0018:ffff880429193c68  EFLAGS: 00010202
RAX: 000000000000000a RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff88042bda7a41
RBP: ffff880429193c68 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000007 R11: ffff88042b3af338 R12: ffff880420b007a0
R13: ffff88081aa56af8 R14: 0000000000000001 R15: ffff88081aa50410
FS:  0000000000000000(0000) GS:ffff88042fe00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000019f2000 CR4: 00000000003407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff880429193d20 ffffffffc02a0c90 ffffc90004b32000 ffff8803fd3ec600
ffff88042bda7800 ffff88042bda7a00 ffff88042bda7840 ffff88042bda7a40
0000000129193d10 2e3836312e323931 ff000a342e363232 ffffffffc01ad99d
Call Trace:
[<ffffffffc02a0c90>] qedi_get_protocol_tlv_data+0x270/0x470 [qedi]
[<ffffffffc01ad99d>] ? qed_mfw_process_tlv_req+0x24d/0xbf0 [qed]
[<ffffffffc01653ae>] qed_mfw_fill_tlv_data+0x5e/0xd0 [qed]
[<ffffffffc01ad9b9>] qed_mfw_process_tlv_req+0x269/0xbf0 [qed]

Fix kernel NULL pointer deref by checking for session is online before
getting iSCSI TLV data.
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 489db5d941500249583ec6b49fa70e006bd8f632 ]

pcm3168 codec support runtime_[resume|suspend], whenever it
is not active, it enters suspend mode, and it's clock and regulators
will be disabled. so there is no need to disable them again in
remove callback.  Otherwise we got following kernel warnings,
when unload pcm3168a driver

[  222.257514] unbalanced disables for amp-en-regulator
[  222.262526] ------------[ cut here ]------------
[  222.267158] WARNING: CPU: 0 PID: 2423 at drivers/regulator/core.c:2264 _regulator_disable+0x28/0x108
[  222.276291] Modules linked in:
[  222.279343]  snd_soc_pcm3168a_i2c(-)
[  222.282916]  snd_aloop
[  222.285272]  arc4
[  222.287194]  wl18xx
[  222.289289]  wlcore
[  222.291385]  mac80211
[  222.293654]  cfg80211
[  222.295923]  aes_ce_blk
[  222.298366]  crypto_simd
[  222.300896]  cryptd
[  222.302992]  aes_ce_cipher
[  222.305696]  crc32_ce
[  222.307965]  ghash_ce
[  222.310234]  aes_arm64
[  222.312590]  gf128mul
[  222.314860]  snd_soc_rcar
[  222.317476]  sha2_ce
[  222.319658]  xhci_plat_hcd
[  222.322362]  sha256_arm64
[  222.324978]  xhci_hcd
[  222.327247]  sha1_ce
[  222.329430]  renesas_usbhs
[  222.332133]  evdev
[  222.334142]  sha1_generic
[  222.336758]  rcar_gen3_thermal
[  222.339810]  cpufreq_dt
[  222.342253]  ravb_streaming(C)
[  222.345304]  wlcore_sdio
[  222.347834]  thermal_sys
[  222.350363]  udc_core
[  222.352632]  mch_core(C)
[  222.355161]  usb_dmac
[  222.357430]  snd_soc_pcm3168a
[  222.360394]  snd_soc_ak4613
[  222.363184]  gpio_keys
[  222.365540]  virt_dma
[  222.367809]  nfsd
[  222.369730]  ipv6
[  222.371652]  autofs4
[  222.373834]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.378629] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.388196] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.396199] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.402117] PC is at _regulator_disable+0x28/0x108
[  222.406906] LR is at _regulator_disable+0x28/0x108
[  222.411695] pc : [<ffff0000083bd89c>] lr : [<ffff0000083bd89c>] pstate: 00000145
[  222.419089] sp : ffff00000a0a3c80
[  222.422401] x29: ffff00000a0a3c80
[  222.425799] x28: ffff8006fa8c6200
[  222.429199] x27: ffff0000086f1000
[  222.432597] x26: 000000000000006a
[  222.435997] x25: 0000000000000124
[  222.439395] x24: 0000000000000018
[  222.442795] x23: 0000000000000006
[  222.446193] x22: ffff8006f925d490
[  222.449592] x21: ffff8006f9ac2068
[  222.452991] x20: ffff8006f9ac2000
[  222.456390] x19: 0000000000000005
[  222.459787] x18: 000000000000000a
[  222.463186] x17: 0000000000000000
[  222.466584] x16: 0000000000000000
[  222.469984] x15: 000000000d3f616a
[  222.473382] x14: 0720072007200720
[  222.476781] x13: 0720072007200720
[  222.480179] x12: 0720072007200720
[  222.483578] x11: 0720072007200720
[  222.486975] x10: 0720072007200720
[  222.490375] x9 : 0720072007200720
[  222.493773] x8 : 07200772076f0774
[  222.497172] x7 : 0000000000000000
[  222.500570] x6 : 0000000000000007
[  222.503969] x5 : 0000000000000000
[  222.507367] x4 : 0000000000000000
[  222.510766] x3 : 0000000000000000
[  222.514164] x2 : c790b852091e2600
[  222.517563] x1 : 0000000000000000
[  222.520961] x0 : 0000000000000028
[  222.524361] Call trace:
[  222.526805] Exception stack(0xffff00000a0a3b40 to 0xffff00000a0a3c80)
[  222.533245] 3b40: 0000000000000028 0000000000000000 c790b852091e2600 0000000000000000
[  222.541075] 3b60: 0000000000000000 0000000000000000 0000000000000007 0000000000000000
[  222.548905] 3b80: 07200772076f0774 0720072007200720 0720072007200720 0720072007200720
[  222.556735] 3ba0: 0720072007200720 0720072007200720 0720072007200720 000000000d3f616a
[  222.564564] 3bc0: 0000000000000000 0000000000000000 000000000000000a 0000000000000005
[  222.572394] 3be0: ffff8006f9ac2000 ffff8006f9ac2068 ffff8006f925d490 0000000000000006
[  222.580224] 3c00: 0000000000000018 0000000000000124 000000000000006a ffff0000086f1000
[  222.588053] 3c20: ffff8006fa8c6200 ffff00000a0a3c80 ffff0000083bd89c ffff00000a0a3c80
[  222.595883] 3c40: ffff0000083bd89c 0000000000000145 0000000000000000 0000000000000000
[  222.603713] 3c60: 0000ffffffffffff ffff00000a0a3c30 ffff00000a0a3c80 ffff0000083bd89c
[  222.611543] [<ffff0000083bd89c>] _regulator_disable+0x28/0x108
[  222.617375] [<ffff0000083bd9c4>] regulator_disable+0x48/0x68
[  222.623033] [<ffff0000083be8e4>] regulator_bulk_disable+0x58/0xc0
[  222.629134] [<ffff0000007d831c>] pcm3168a_remove+0x30/0x50 [snd_soc_pcm3168a]
[  222.636270] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  222.644106] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  222.649766] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  222.656640] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  222.661951] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  222.667609] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  222.673268] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  222.678666] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  222.687019] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  222.692850] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  222.699289] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  222.707119] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  222.714948] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  222.722778] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  222.730607] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  222.738436] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  222.746266] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  222.754096] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  222.761926] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  222.769755] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  222.777589] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  222.782899] ---[ end trace eaf8939a3698b1a8 ]---
[  222.787609] Failed to disable VCCDA2: -5
[  222.791649] ------------[ cut here ]------------
[  222.796283] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:595 clk_core_disable+0xc/0x1d8
[  222.804460] Modules linked in:
[  222.807511]  snd_soc_pcm3168a_i2c(-)
[  222.811083]  snd_aloop
[  222.813439]  arc4
[  222.815360]  wl18xx
[  222.817456]  wlcore
[  222.819551]  mac80211
[  222.821820]  cfg80211
[  222.824088]  aes_ce_blk
[  222.826531]  crypto_simd
[  222.829060]  cryptd
[  222.831155]  aes_ce_cipher
[  222.833859]  crc32_ce
[  222.836127]  ghash_ce
[  222.838396]  aes_arm64
[  222.840752]  gf128mul
[  222.843020]  snd_soc_rcar
[  222.845637]  sha2_ce
[  222.847818]  xhci_plat_hcd
[  222.850522]  sha256_arm64
[  222.853138]  xhci_hcd
[  222.855407]  sha1_ce
[  222.857589]  renesas_usbhs
[  222.860292]  evdev
[  222.862300]  sha1_generic
[  222.864917]  rcar_gen3_thermal
[  222.867968]  cpufreq_dt
[  222.870410]  ravb_streaming(C)
[  222.873461]  wlcore_sdio
[  222.875991]  thermal_sys
[  222.878520]  udc_core
[  222.880789]  mch_core(C)
[  222.883318]  usb_dmac
[  222.885587]  snd_soc_pcm3168a
[  222.888551]  snd_soc_ak4613
[  222.891341]  gpio_keys
[  222.893696]  virt_dma
[  222.895965]  nfsd
[  222.897886]  ipv6
[  222.899808]  autofs4
[  222.901990]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.906783] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.916349] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.924351] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.930270] PC is at clk_core_disable+0xc/0x1d8
[  222.934799] LR is at clk_core_disable_lock+0x20/0x34
[  222.939761] pc : [<ffff0000083ab9b8>] lr : [<ffff0000083acd28>] pstate: 800001c5
[  222.947154] sp : ffff00000a0a3cf0
[  222.950466] x29: ffff00000a0a3cf0
[  222.953864] x28: ffff8006fa8c6200
[  222.957263] x27: ffff0000086f1000
[  222.960661] x26: 000000000000006a
[  222.964061] x25: 0000000000000124
[  222.967458] x24: 0000000000000015
[  222.970858] x23: ffff8006f9ffa8d0
[  222.974256] x22: ffff8006faf16480
[  222.977655] x21: ffff0000007e7040
[  222.981053] x20: ffff8006faadd100
[  222.984452] x19: 0000000000000140
[  222.987850] x18: 000000000000000a
[  222.991249] x17: 0000000000000000
[  222.994647] x16: 0000000000000000
[  222.998046] x15: 000000000d477819
[  223.001444] x14: 0720072007200720
[  223.004843] x13: 0720072007200720
[  223.008242] x12: 0720072007200720
[  223.011641] x11: 0720072007200720
[  223.015039] x10: 0720072007200720
[  223.018438] x9 : 0720072007200720
[  223.021837] x8 : 0720072007200720
[  223.025236] x7 : 0000000000000000
[  223.028634] x6 : 0000000000000007
[  223.032034] x5 : 0000000000000000
[  223.035432] x4 : 0000000000000000
[  223.038831] x3 : 0000000000000000
[  223.042229] x2 : 0000000004720471
[  223.045628] x1 : 0000000000000000
[  223.049026] x0 : ffff8006faadd100
[  223.052426] Call trace:
[  223.054870] Exception stack(0xffff00000a0a3bb0 to 0xffff00000a0a3cf0)
[  223.061309] 3ba0:                                   ffff8006faadd100 0000000000000000
[  223.069139] 3bc0: 0000000004720471 0000000000000000 0000000000000000 0000000000000000
[  223.076969] 3be0: 0000000000000007 0000000000000000 0720072007200720 0720072007200720
[  223.084798] 3c00: 0720072007200720 0720072007200720 0720072007200720 0720072007200720
[  223.092628] 3c20: 0720072007200720 000000000d477819 0000000000000000 0000000000000000
[  223.100458] 3c40: 000000000000000a 0000000000000140 ffff8006faadd100 ffff0000007e7040
[  223.108287] 3c60: ffff8006faf16480 ffff8006f9ffa8d0 0000000000000015 0000000000000124
[  223.116117] 3c80: 000000000000006a ffff0000086f1000 ffff8006fa8c6200 ffff00000a0a3cf0
[  223.123947] 3ca0: ffff0000083acd28 ffff00000a0a3cf0 ffff0000083ab9b8 00000000800001c5
[  223.131777] 3cc0: ffff00000a0a3cf0 ffff0000083acd1c 0000ffffffffffff ffff8006faadd100
[  223.139606] 3ce0: ffff00000a0a3cf0 ffff0000083ab9b8
[  223.144483] [<ffff0000083ab9b8>] clk_core_disable+0xc/0x1d8
[  223.150054] [<ffff0000083acd58>] clk_disable+0x1c/0x28
[  223.155198] [<ffff0000007d8328>] pcm3168a_remove+0x3c/0x50 [snd_soc_pcm3168a]
[  223.162334] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.170167] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.175826] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.182700] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.188012] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.193669] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.199329] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.204726] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.213079] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.218909] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.225349] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.233179] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.241008] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.248838] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.256668] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.264497] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.272327] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.280157] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.287986] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.295816] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.303648] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.308958] ---[ end trace eaf8939a3698b1a9 ]---
[  223.313752] ------------[ cut here ]------------
[  223.318383] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:477 clk_core_unprepare+0xc/0x1ac
[  223.326733] Modules linked in:
[  223.329784]  snd_soc_pcm3168a_i2c(-)
[  223.333356]  snd_aloop
[  223.335712]  arc4
[  223.337633]  wl18xx
[  223.339728]  wlcore
[  223.341823]  mac80211
[  223.344092]  cfg80211
[  223.346360]  aes_ce_blk
[  223.348803]  crypto_simd
[  223.351332]  cryptd
[  223.353428]  aes_ce_cipher
[  223.356131]  crc32_ce
[  223.358400]  ghash_ce
[  223.360668]  aes_arm64
[  223.363024]  gf128mul
[  223.365293]  snd_soc_rcar
[  223.367909]  sha2_ce
[  223.370091]  xhci_plat_hcd
[  223.372794]  sha256_arm64
[  223.375410]  xhci_hcd
[  223.377679]  sha1_ce
[  223.379861]  renesas_usbhs
[  223.382564]  evdev
[  223.384572]  sha1_generic
[  223.387188]  rcar_gen3_thermal
[  223.390239]  cpufreq_dt
[  223.392682]  ravb_streaming(C)
[  223.395732]  wlcore_sdio
[  223.398261]  thermal_sys
[  223.400790]  udc_core
[  223.403059]  mch_core(C)
[  223.405588]  usb_dmac
[  223.407856]  snd_soc_pcm3168a
[  223.410820]  snd_soc_ak4613
[  223.413609]  gpio_keys
[  223.415965]  virt_dma
[  223.418234]  nfsd
[  223.420155]  ipv6
[  223.422076]  autofs4
[  223.424258]  [last unloaded: snd_soc_pcm3168a_i2c]
[  223.429050] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  223.438616] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  223.446618] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  223.452536] PC is at clk_core_unprepare+0xc/0x1ac
[  223.457239] LR is at clk_unprepare+0x28/0x3c
[  223.461506] pc : [<ffff0000083ab5a4>] lr : [<ffff0000083ace4c>] pstate: 60000145
[  223.468900] sp : ffff00000a0a3d00
[  223.472211] x29: ffff00000a0a3d00
[  223.475609] x28: ffff8006fa8c6200
[  223.479009] x27: ffff0000086f1000
[  223.482407] x26: 000000000000006a
[  223.485807] x25: 0000000000000124
[  223.489205] x24: 0000000000000015
[  223.492604] x23: ffff8006f9ffa8d0
[  223.496003] x22: ffff8006faf16480
[  223.499402] x21: ffff0000007e7040
[  223.502800] x20: ffff8006faf16420
[  223.506199] x19: ffff8006faadd100
[  223.509597] x18: 000000000000000a
[  223.512997] x17: 0000000000000000
[  223.516395] x16: 0000000000000000
[  223.519794] x15: 0000000000000000
[  223.523192] x14: 00000033fe89076c
[  223.526591] x13: 0000000000000400
[  223.529989] x12: 0000000000000400
[  223.533388] x11: 0000000000000000
[  223.536786] x10: 00000000000009e0
[  223.540185] x9 : ffff00000a0a3be0
[  223.543583] x8 : ffff8006fa8c6c40
[  223.546982] x7 : ffff8006fa8c6400
[  223.550380] x6 : 0000000000000001
[  223.553780] x5 : 0000000000000000
[  223.557178] x4 : ffff8006fa8c6200
[  223.560577] x3 : 0000000000000000
[  223.563975] x2 : ffff8006fa8c6200
[  223.567374] x1 : 0000000000000000
[  223.570772] x0 : ffff8006faadd100
[  223.574170] Call trace:
[  223.576615] Exception stack(0xffff00000a0a3bc0 to 0xffff00000a0a3d00)
[  223.583054] 3bc0: ffff8006faadd100 0000000000000000 ffff8006fa8c6200 0000000000000000
[  223.590884] 3be0: ffff8006fa8c6200 0000000000000000 0000000000000001 ffff8006fa8c6400
[  223.598714] 3c00: ffff8006fa8c6c40 ffff00000a0a3be0 00000000000009e0 0000000000000000
[  223.606544] 3c20: 0000000000000400 0000000000000400 00000033fe89076c 0000000000000000
[  223.614374] 3c40: 0000000000000000 0000000000000000 000000000000000a ffff8006faadd100
[  223.622204] 3c60: ffff8006faf16420 ffff0000007e7040 ffff8006faf16480 ffff8006f9ffa8d0
[  223.630033] 3c80: 0000000000000015 0000000000000124 000000000000006a ffff0000086f1000
[  223.637863] 3ca0: ffff8006fa8c6200 ffff00000a0a3d00 ffff0000083ace4c ffff00000a0a3d00
[  223.645693] 3cc0: ffff0000083ab5a4 0000000060000145 0000000000000140 ffff8006faadd100
[  223.653523] 3ce0: 0000ffffffffffff ffff0000083ace44 ffff00000a0a3d00 ffff0000083ab5a4
[  223.661353] [<ffff0000083ab5a4>] clk_core_unprepare+0xc/0x1ac
[  223.667103] [<ffff0000007d8330>] pcm3168a_remove+0x44/0x50 [snd_soc_pcm3168a]
[  223.674239] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.682070] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.687731] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.694604] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.699915] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.705572] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.711230] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.716628] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.724980] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.730811] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.737250] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.745079] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.752909] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.760739] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.768568] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.776398] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.784227] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.792057] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.799886] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.807715] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.815546] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.820855] ---[ end trace eaf8939a3698b1aa ]---

Fix this issue by only disable clock and regulators in remove callback
when CONFIG_PM isn't defined
Signed-off-by: NJiada Wang <jiada_wang@mentor.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2cbdcb882f97a45f7475c67ac6257bbc16277dfe ]

If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.

Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.

In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
 - AFS, when automounting special "symlinks" referencing other cells
 - CIFS, when automounting "referrals"
 - NFS, when automounting subtrees
 - debugfs, when automounting tracefs

In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
 - sget_userns() in fs/super.c:
	if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
	    !(type->fs_flags & FS_USERNS_MOUNT) &&
	    !capable(CAP_SYS_ADMIN))
		return ERR_PTR(-EPERM);
 - sget() in fs/super.c:
        /* Ensure the requestor has permissions over the target filesystem */
        if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
                return ERR_PTR(-EPERM);

Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.

Fixes: 93faccbb ("fs: Better permission checking for submounts")
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 30522a951f9d02f261d0697c35cb42205b1fae17 ]

Currently registering CvP managers works only for first probed CvP
device, for all other devices it is refused due to duplicated chkcfg
sysfs entry:

fpga_manager fpga3: Altera CvP FPGA Manager @0000:0c:00.0 registered
sysfs: cannot create duplicate filename '/bus/pci/drivers/altera-cvp/chkcfg'
CPU: 0 PID: 3808 Comm: bash Tainted: G           O      4.19.0-custom+ #5
Call Trace:
  dump_stack+0x46/0x5b
  sysfs_warn_dup+0x53/0x60
  sysfs_add_file_mode_ns+0x16d/0x180
  sysfs_create_file_ns+0x51/0x60
  altera_cvp_probe+0x16f/0x2a0 [altera_cvp]
  local_pci_probe+0x3f/0xa0
  ? pci_match_device+0xb1/0xf0
  pci_device_probe+0x116/0x170
  really_probe+0x21b/0x2c0
  driver_probe_device+0x4b/0xe0
  bind_store+0xcb/0x130
  kernfs_fop_write+0xfd/0x180
  __vfs_write+0x21/0x150
  ? selinux_file_permission+0xdc/0x130
  vfs_write+0xa8/0x1a0
  ? find_vma+0xd/0x60
  ksys_write+0x3d/0x90
  do_syscall_64+0x44/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ...
 altera-cvp 0000:0c:00.0: Can't create sysfs chkcfg file
 fpga_manager fpga3: fpga_mgr_unregister Altera CvP FPGA Manager @0000:0c:00.0

Move chkcfg creation to module init as suggested by Alan.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ceb94bc52c437463f0903e61060a94a2226fb672 ]

This patch adds a safety connection way for "forced_b_device" with
"workaround_for_vbus" like below:

< Example for R-Car E3 Ebisu >
 # modprobe <any usb gadget driver>
 # echo 1 > /sys/kernel/debug/ee020000.usb/b_device
 (connect a usb cable to host side.)
 # echo 2 > /sys/kernel/debug/ee020000.usb/b_device

Previous code should have connected a usb cable before the "b_device"
is set to 1 on the Ebisu board. However, if xHCI driver on the board
is probed, it causes some troubles:
 - Conflicts USB VBUS/signals between the board and another host.
 - "Cannot enable. Maybe the USB cable is bad?" might happen on
   both the board and another host with a usb hub.
 - Cannot enumerate a usb gadget correctly because an interruption
   of VBUS change happens unexpectedly.
Reported-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5a863813216ce79e16a8c1503b2543c528b778b6 ]

Currently, kprobe_events failure won't be handled properly.
Due to calling system() indirectly to write to kprobe_events,
it can't be identified whether an error is derived from kprobe or system.

    // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events"
    err = system(buf);
    if (err < 0) {
        printf("failed to create kprobe ..");
        return -1;
    }

For example, running ./tracex7 sample in ext4 partition,
"echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events"
gets 256 error code system() failure.
=> The error comes from kprobe, but it's not handled correctly.

According to man of system(3), it's return value
just passes the termination status of the child shell
rather than treating the error as -1. (don't care success)

Which means, currently it's not working as desired.
(According to the upper code snippet)

    ex) running ./tracex7 with ext4 env.
    # Current Output
    sh: echo: I/O error
    failed to open event open_ctree

    # Desired Output
    failed to create kprobe 'open_ctree' error 'No such file or directory'

The problem is, error can't be verified whether from child ps
or system. But using write() directly can verify the command
failure, and it will treat all error as -1. So I suggest using
write() directly to 'kprobe_events' rather than calling system().
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ad9b2b8e53af61375322e3c7d624acf3a3ef53b0 ]

The public S805 datasheet only mentions that
HHI_SYS_CPU_CLK_CNTL1[20:29] contains a divider called "cpu_scale_div".
Unfortunately it does not mention how to use the register contents.

The Amlogic 3.10 GPL kernel sources are using the following code to
calculate the CPU clock based on that register (taken from
arch/arm/mach-meson8/clock.c in the 3.10 Amlogic kernel, shortened to
make it easier to read):
N = (aml_read_reg32(P_HHI_SYS_CPU_CLK_CNTL1) >> 20) & 0x3FF;
if (sel == 3) /* use cpu_scale_div */
  div = 2 * N;
else
  div = ... /* not relevant for this example */
cpu_clk = parent_clk / div;

This suggests that the formula is: parent_rate / 2 * register_value
However, running perf (which can measure the CPU clock rate thanks to
the ARM PMU) shows that this formula is not correct.
This can be reproduced with the following steps:
1. boot into u-boot
2. let the CPU clock run off the XTAL clock:
   mw.l 0xC110419C 0x30 1
3. set the cpu_scale_div register:
   to value 0x1: mw.l 0xC110415C 0x801016A2 1
   to value 0x2: mw.l 0xC110415C 0x802016A2 1
   to value 0x5: mw.l 0xC110415C 0x805016A2 1
4. let the CPU clock run off cpu_scale_div:
   mw.l 0xC110419C 0xbd 1
5. boot Linux
6. run: perf stat -aB stress --cpu 4 --timeout 10
7. check the "cycles" value

I get the following results depending on the cpu_scale_div value:
- (cpu_in_sel - this is the input clock for cpu_scale_div - runs at
   1.2GHz)
- 0x1 = 300MHz
- 0x2 = 200MHz
- 0x5 = 100MHz

This means that the actual formula to calculate the output of the
cpu_scale_div clock is: parent_rate / 2 * (register value + 1).

The register value 0x0 is reserved. When letting the CPU clock run off
the cpu_scale_div while the value is 0x0 the whole board hangs (even in
u-boot).

I also verified this with the TWD timer: when adding this to the .dts
without specifying it's clock it will auto-detect the PERIPH (which is
the input clock of the TWD) clock rate (and the result is shown in the
kernel log). On Meson8, Meson8b and Meson8m2 the PERIPH clock is CPUCLK
divided by 4. This also matched for all three test-cases from above (in
all cases the TWD timer clock rate was approx. one fourth of the CPU
clock rate).

A small note regarding the "fixes" tag: the original issue seems to
exist virtually since forever. Even commit 28b9fcd0 ("clk:
meson8b: Add support for Meson8b clocks") seems to handle this wrong. I
still decided to use commit 251b6fd3 ("clk: meson: rework meson8b
cpu clock") because this is the first commit which gets the CPU hiearchy
correct and thus it's the first commit where the cpu_scale_div register
is used correctly (apart from the bug in the cpu_scale_table).

Fixes: 251b6fd3 ("clk: meson: rework meson8b cpu clock")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20180927085921.24627-2-martin.blumenstingl@googlemail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2de42f79bb21a412f40ade8831eb6fc445cb78a4 ]

Consider the following scenario:
1. nonblocking enable crtc
2. wait for the event
3. nonblocking disable crtc

On i915 this can lead to a spurious -EBUSY from step 3 on
account of non-enabled planes getting the fake_commit in step 1
and we don't complete the fake_commit-> flip_done until
drm_atomic_helper_commit_hw_done() which can happen a long
time after the flip event was sent out.

This will become somewhat easy to hit on SKL+ once we start
to add all the planes for the crtc to every modeset commit
for the purposes of forcing a watermark register programming
[1].

To make the race a little less pronounced let's complete
fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done().
For the single crtc case this should make the race quite
theoretical, assuming drm_atomic_helper_wait_for_flip_done()
actually has to wait for the real commit flip_done. In case
the real commit flip_done gets completed singificantly before
drm_atomic_helper_wait_for_flip_done(), or we are dealing with
multiple crtcs whose vblanks don't line up nicely the race still
exists.

[1] https://patchwork.freedesktop.org/patch/262670/

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 080de2e5 ("drm/atomic: Check for busy planes/connectors before setting the commit")
Testcase: igt/kms_cursor_legacy/*nonblocking-modeset-vs-cursor-atomic
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 81e9fa8bab381f8b6eb04df7cdf0f71994099bd4 ]

The armv8_pmuv3 driver doesn't have a remove function, and when the test
'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, the following Call trace
can be seen.

[    1.424287] Failed to register pmu: armv8_pmuv3, reason -17
[    1.424870] WARNING: CPU: 0 PID: 1 at ../kernel/events/core.c:11771 perf_event_sysfs_init+0x98/0xdc
[    1.425220] Modules linked in:
[    1.425531] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         4.19.0-rc7-next-20181012-00003-ge7a97b1ad77b-dirty #35
[    1.425951] Hardware name: linux,dummy-virt (DT)
[    1.426212] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    1.426458] pc : perf_event_sysfs_init+0x98/0xdc
[    1.426720] lr : perf_event_sysfs_init+0x98/0xdc
[    1.426908] sp : ffff00000804bd50
[    1.427077] x29: ffff00000804bd50 x28: ffff00000934e078
[    1.427429] x27: ffff000009546000 x26: 0000000000000007
[    1.427757] x25: ffff000009280710 x24: 00000000ffffffef
[    1.428086] x23: ffff000009408000 x22: 0000000000000000
[    1.428415] x21: ffff000009136008 x20: ffff000009408730
[    1.428744] x19: ffff80007b20b400 x18: 000000000000000a
[    1.429075] x17: 0000000000000000 x16: 0000000000000000
[    1.429418] x15: 0000000000000400 x14: 2e79726f74636572
[    1.429748] x13: 696420656d617320 x12: 656874206e692065
[    1.430060] x11: 6d616e20656d6173 x10: 2065687420687469
[    1.430335] x9 : ffff00000804bd50 x8 : 206e6f7361657220
[    1.430610] x7 : 2c3376756d705f38 x6 : ffff00000954d7ce
[    1.430880] x5 : 0000000000000000 x4 : 0000000000000000
[    1.431226] x3 : 0000000000000000 x2 : ffffffffffffffff
[    1.431554] x1 : 4d151327adc50b00 x0 : 0000000000000000
[    1.431868] Call trace:
[    1.432102]  perf_event_sysfs_init+0x98/0xdc
[    1.432382]  do_one_initcall+0x6c/0x1a8
[    1.432637]  kernel_init_freeable+0x1bc/0x280
[    1.432905]  kernel_init+0x18/0x160
[    1.433115]  ret_from_fork+0x10/0x18
[    1.433297] ---[ end trace 27fd415390eb9883 ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, since there's no real reason to
remove the armv8_pmuv3 driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3da2c1dfdb802b184eea0653d1e589515b52d74b ]

ecc_point_mult is supposed to be used with a regularized scalar,
otherwise, it's possible to deduce the position of the top bit of the
scalar with timing attack. This is important when the scalar is a
private key.

ecc_point_mult is already using a regular algorithm (i.e. having an
operation flow independent of the input scalar) but regularization step
is not implemented.

Arrange scalar to always have fixed top bit by adding a multiple of the
curve order (n).

References:
The constant time regularization step is based on micro-ecc by Kenneth
MacKay and also referenced in the literature (Bernstein, D. J., & Lange,
T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology
ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.)
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Cc: kernel-hardening@lists.openwall.com
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e4849aff1e169b86c561738daf8ff020e9de1011 ]

The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip
DRAM controller that supports memory amounts of up to 16GiB, and due to
how the address decoder has been wired in the SOC any memory beyond 1GiB
is actually mapped starting from 4GiB physical up, that is beyond the
32-bit addressable limit[1].  Consequently if the maximum amount of
memory has been installed, then it will span up to 19GiB.

Many of the evaluation boards we support that are based on one of these
SOCs have their memory soldered and the amount present fits in the
32-bit address range.  The BCM91250A SWARM board however has actual DIMM
slots and accepts, depending on the peripherals revision of the SOC, up
to 4GiB or 8GiB of memory in commercially available JEDEC modules[2].
I believe this is also the case with the BCM91250C2 LittleSur board.
This means that up to either 3GiB or 7GiB of memory requires 64-bit
addressing to access.

I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead,
accepts at least as much memory, although I have no documentation or
actual hardware available to verify that.

Both systems have PCI slots installed for use by any PCI option boards,
including ones that only support 32-bit addressing (additionally the
32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits
addressing to 32-bits), and there is no IOMMU available.  Therefore for
PCI DMA to work in the presence of memory beyond enable swiotlb for the
affected systems.

All the other SOC onchip DMA devices use 40-bit addressing and therefore
can address the whole memory, so only enable swiotlb if PCI support and
support for DMA beyond 4GiB have been both enabled in the configuration
of the kernel.

This shows up as follows:

Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2)
Board type: SiByte BCM91250A (SWARM)
Determined physical RAM map:
 memory: 000000000fe7fe00 @ 0000000000000000 (usable)
 memory: 000000001ffffe00 @ 0000000080000000 (usable)
 memory: 000000000ffffe00 @ 00000000c0000000 (usable)
 memory: 0000000087fffe00 @ 0000000100000000 (usable)
software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB)

in the bootstrap log and removes failures like these:

defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi0: Receive buffer allocation failed
fddi0: Adapter open failed!
IP-Config: Failed to open fddi0
defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi1: Receive buffer allocation failed
fddi1: Adapter open failed!
IP-Config: Failed to open fddi1

when memory beyond 4GiB is handed out to devices that can only do 32-bit
addressing.

This updates commit cce335ae ("[MIPS] 64-bit Sibyte kernels need
DMA32.").

References:

[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
    Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview",
    "Memory Map", pp. 34-38

[2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom
    Corporation, 18 May 2004, Section 3: "Physical Description",
    "Supported DRAM", p. 23
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
[paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it]
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21108/
References: cce335ae ("[MIPS] 64-bit Sibyte kernels need DMA32.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 68b5e4326e4b8ac9080835005d8254fed0fb3c56 ]

Add the proper includes and make smca_get_name() static.

Fix an actual bug too which the warning triggered:

  arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \
  types for ‘smp_thermal_interrupt’
   asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
                                         ^~~~~~~~~~~~~~~~~~~~~
  In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29:
  ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \
	  ‘smp_thermal_interrupt’ was here
   asmlinkage void smp_thermal_interrupt(void);
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.deSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fba43f454cdf9caa3185219d116bd2a6e6354552 ]

This commit adds support for APOGEE duet FireWire, launched 2007, already
discontinued. This model uses Oxford Semiconductor FW971 as its
communication engine. Below is information on Configuration ROM of this
unit. The unit supports some AV/C commands defined by Audio subunit
specification and vendor dependent commands.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 42949742248,
                'cmc': False,
                'cyc_clk_acc': 255,
                'generation': 0,
                'imc': False,
                'isc': True,
                'link_spd': 3,
                'max_ROM': 0,
                'max_rec': 64,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 122333],
                      ['DESCRIPTOR', 'Duet'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 122333],
                          ['DESCRIPTOR', 'Duet']]]]}
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46f53a65d2de3e1591636c22b626b09d8684fd71 ]

Currently BPF verifier allows narrow loads for a context field only with
offset zero. E.g. if there is a __u32 field then only the following
loads are permitted:
  * off=0, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=0, size=4 (full).

On the other hand LLVM can generate a load with offset different than
zero that make sense from program logic point of view, but verifier
doesn't accept it.

E.g. tools/testing/selftests/bpf/sendmsg4_prog.c has code:

  #define DST_IP4			0xC0A801FEU /* 192.168.1.254 */
  ...
  	if ((ctx->user_ip4 >> 24) == (bpf_htonl(DST_IP4) >> 24) &&

where ctx is struct bpf_sock_addr.

Some versions of LLVM can produce the following byte code for it:

       8:       71 12 07 00 00 00 00 00         r2 = *(u8 *)(r1 + 7)
       9:       67 02 00 00 18 00 00 00         r2 <<= 24
      10:       18 03 00 00 00 00 00 fe 00 00 00 00 00 00 00 00         r3 = 4261412864 ll
      12:       5d 32 07 00 00 00 00 00         if r2 != r3 goto +7 <LBB0_6>

where `*(u8 *)(r1 + 7)` means narrow load for ctx->user_ip4 with size=1
and offset=3 (7 - sizeof(ctx->user_family) = 3). This load is currently
rejected by verifier.

Verifier code that rejects such loads is in bpf_ctx_narrow_access_ok()
what means any is_valid_access implementation, that uses the function,
works this way, e.g. bpf_skb_is_valid_access() for __sk_buff or
sock_addr_is_valid_access() for bpf_sock_addr.

The patch makes such loads supported. Offset can be in [0; size_default)
but has to be multiple of load size. E.g. for __u32 field the following
loads are supported now:
  * off=0, size=1 (narrow);
  * off=1, size=1 (narrow);
  * off=2, size=1 (narrow);
  * off=3, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=2, size=2 (narrow);
  * off=0, size=4 (full).
Reported-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 646097940ad35aa2c1f2012af932d55976a9f255 ]

When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled,
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init).
devtmpfs gets killed because we try to remove a file and decrement the
wb reference count before the noop_backing_device_info gets initialized.

[    0.332075] Serial: AMBA PL011 UART driver
[    0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
[    0.502382] console [ttyAMA0] enabled
[    0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000
[    0.516053] Mem abort info:
[    0.516222]   ESR = 0x96000004
[    0.516417]   Exception class = DABT (current EL), IL = 32 bits
[    0.516641]   SET = 0, FnV = 0
[    0.516826]   EA = 0, S1PTW = 0
[    0.516984] Data abort info:
[    0.517149]   ISV = 0, ISS = 0x00000004
[    0.517339]   CM = 0, WnR = 0
[    0.517553] [0000800074c12000] user address but active_mm is swapper
[    0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    0.518305] Modules linked in:
[    0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82
[    0.519307] Hardware name: linux,dummy-virt (DT)
[    0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    0.519959] pc : __destroy_inode+0x94/0x2a8
[    0.520212] lr : __destroy_inode+0x78/0x2a8
[    0.520401] sp : ffff0000098c3b20
[    0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714
[    0.520904] x27: 0000000000002000 x26: 0000000000002000
[    0.521179] x25: ffff000009583000 x24: 0000000000000000
[    0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0
[    0.521737] x21: ffff0000093f9338 x20: 0000000000000000
[    0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400
[    0.522376] x17: 0000000000000000 x16: 0000000000000000
[    0.522727] x15: 0000000000000400 x14: 0000000000000400
[    0.523068] x13: 0000000000000001 x12: 0000000000000001
[    0.523421] x11: 0000000000000000 x10: 0000000000000970
[    0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190
[    0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88
[    0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb
[    0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff
[    0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000
[    0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____))
[    0.525529] Call trace:
[    0.525806]  __destroy_inode+0x94/0x2a8
[    0.526108]  destroy_inode+0x34/0x88
[    0.526370]  evict+0x144/0x1c8
[    0.526636]  iput+0x184/0x230
[    0.526871]  dentry_unlink_inode+0x118/0x130
[    0.527152]  d_delete+0xd8/0xe0
[    0.527420]  vfs_unlink+0x240/0x270
[    0.527665]  handle_remove+0x1d8/0x330
[    0.527875]  devtmpfsd+0x138/0x1c8
[    0.528085]  kthread+0x14c/0x158
[    0.528291]  ret_from_fork+0x10/0x18
[    0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04)
[    0.529367] ---[ end trace 5a3dee47727f877c ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and
xilinx_uartps as well.
Co-developed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 347a28b586802d09604a149c1a1f6de5dccbe6fa ]

This happened while running in qemu-system-aarch64, the AMBA PL011 UART
driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE.
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init),
devtmpfs' handle_remove() crashes because the reference count is a NULL
pointer only because wb->bdi hasn't been initialized yet.

Rework so that wb_put have an extra check if wb->bdi before decrement
wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again
in other drivers.

Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Co-developed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c528e457d53c75107d5aa56892316d265c778de ]

The refcount of a newly added overlay node decrements to one
(instead of zero) when the overlay changeset is destroyed.  This
change will cause the final decrement be to zero.

After applying this patch, new validation warnings will be
reported from the devicetree unittest during boot due to
a pre-existing devicetree bug.  The warnings will be similar to:

  OF: ERROR: memory leak before free overlay changeset,  /testcase-data/overlay-node/test-bus/test-unittest4

This pre-existing devicetree bug will also trigger a WARN_ONCE() from
refcount_sub_and_test_checked() when an overlay changeset is
destroyed without having first been applied.  This scenario occurs
when an error in the overlay is detected during the overlay changeset
creation:

  WARNING: CPU: 0 PID: 1 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa8/0xbc
  refcount_t: underflow; use-after-free.

  (unwind_backtrace) from (show_stack+0x10/0x14)
  (show_stack) from (dump_stack+0x6c/0x8c)
  (dump_stack) from (__warn+0xdc/0x104)
  (__warn) from (warn_slowpath_fmt+0x44/0x6c)
  (warn_slowpath_fmt) from (refcount_sub_and_test_checked+0xa8/0xbc)
  (refcount_sub_and_test_checked) from (kobject_put+0x24/0x208)
  (kobject_put) from (of_changeset_destroy+0x2c/0xb4)
  (of_changeset_destroy) from (free_overlay_changeset+0x1c/0x9c)
  (free_overlay_changeset) from (of_overlay_remove+0x284/0x2cc)
  (of_overlay_remove) from (of_unittest_apply_revert_overlay_check.constprop.4+0xf8/0x1e8)
  (of_unittest_apply_revert_overlay_check.constprop.4) from (of_unittest_overlay+0x960/0xed8)
  (of_unittest_overlay) from (of_unittest+0x1cc4/0x2138)
  (of_unittest) from (do_one_initcall+0x4c/0x28c)
  (do_one_initcall) from (kernel_init_freeable+0x29c/0x378)
  (kernel_init_freeable) from (kernel_init+0x8/0x110)
  (kernel_init) from (ret_from_fork+0x14/0x2c)
Tested-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f96afa767baffba7645f5e10998f5178948bb9aa ]

libbpf is now able to load successfully test_l4lb_noinline.o and
samples/bpf/tracex3_kern.o.

For the test_l4lb_noinline, uncomment related tests from test_libbpf.c
and remove the associated "TODO".

For tracex3_kern.o, instead of loading a program from samples/bpf/ that
might not have been compiled at this stage, try loading a program from
BPF selftests. Since this test case is about loading a program compiled
without the "-target bpf" flag, change the Makefile to compile one
program accordingly (instead of passing the flag for compiling all
programs).

Regarding test_xdp_noinline.o: in its current shape the program fails to
load because it provides no version section, but the loader needs one.
The test was added to make sure that libbpf could load XDP programs even
if they do not provide a version number in a dedicated section. But
libbpf is already capable of doing that: in our case loading fails
because the loader does not know that this is an XDP program (it does
not need to, since it does not attach the program). So trying to load
test_xdp_noinline.o does not bring much here: just delete this subtest.

For the record, the error message obtained with tracex3_kern.o was
fixed by commit e3d91b0c ("tools/libbpf: handle issues with bpf ELF
objects containing .eh_frames")

I have not been abled to reproduce the "libbpf: incorrect bpf_call
opcode" error for test_l4lb_noinline.o, even with the version of libbpf
present at the time when test_libbpf.sh and test_libbpf_open.c were
created.

RFC -> v1:
- Compile test_xdp without the "-target bpf" flag, and try to load it
  instead of ../../samples/bpf/tracex3_kern.o.
- Delete test_xdp_noinline.o subtest.

Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 23b5f73266e59a598c1e5dd435d87651b5a7626b ]

During HARD_RESET the data link is disconnected.
For self powered device, the spec is advising against doing that.

>From USB_PD_R3_0
7.1.5 Response to Hard Resets
Device operation during and after a Hard Reset is defined as follows:
Self-powered devices Should Not disconnect from USB during a Hard Reset
(see Section 9.1.2).
Bus powered devices will disconnect from USB during a Hard Reset due to the
loss of their power source.

Tackle this by letting TCPM know whether the device is self or bus powered.

This overcomes unnecessary port disconnections from hard reset.
Also, speeds up the enumeration time when connected to Type-A ports.
Signed-off-by: NBadhri Jagan Sridharan <badhri@google.com>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
---------
Version history:
V3:
Rebase on top of usb-next

V2:
Based on feedback from heikki.krogerus@linux.intel.com
- self_powered added to the struct tcpm_port which is populated from
  a. "connector" node of the device tree in tcpm_fw_get_caps()
  b. "self_powered" node of the tcpc_config in tcpm_copy_caps

Based on feedbase from linux@roeck-us.net
- Code was refactored
- SRC_HARD_RESET_VBUS_OFF sets the link state to false based
  on self_powered flag

V1 located here:
https://lkml.org/lkml/2018/9/13/94Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e1f65b0d70e9e5c80e15105cd96fa00174d7c436 ]

It seems with some NICs supported by the e1000e driver a SYSTIM reading
may occasionally be few microseconds before the previous reading and if
enabled also pass e1000e_sanitize_systim() without reaching the maximum
number of rereads, even if the function is modified to check three
consecutive readings (i.e. it doesn't look like a double read error).
This causes an underflow in the timecounter and the PHC time jumps hours
ahead.

This was observed on 82574, I217 and I219. The fastest way to reproduce
it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl
on the PHC.

Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of
timecounter_read() in order to allow non-monotonic SYSTIM readings and
prevent the PHC from jumping.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com>
Acked-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 78f3ac76d9e5219589718b9e4733bee21627b3f5 ]

In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.

Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.

Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.

 Scope (_SB)
 {
     (...)

     Device (ATKD)
     {
         (...)

         Name (_WDG, Buffer (0x28)
         {
             /* 0000 */  0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
             /* 0008 */  0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
             /* 0010 */  0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
             /* 0018 */  0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
             /* 0020 */  0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
         })
         Method (WMNB, 3, Serialized)
         {
             CreateDWordField (Arg2, Zero, IIA0)
             CreateDWordField (Arg2, 0x04, IIA1)
             Local0 = (Arg1 & 0xFFFFFFFF)

             (...)

             If ((Local0 == 0x53564544))
             {
                 (...)

                 If ((IIA0 == 0x00050011))
                 {
                     If ((IIA1 == 0x02))
                     {
                         ^^PCI0.SBRG.EC0.SPIN (0x72, One)
                         ^^PCI0.SBRG.EC0.BLCT = One
                     }

                     Return (One)
                 }
             }
             (...)
         }
         (...)
     }
     (...)
 }
 (...)

 Scope (_SB.PCI0.SBRG.EC0)
 {
     (...)

     Name (BLCT, Zero)

     (...)

     Method (_Q10, 0, NotSerialized)  // _Qxx: EC Query
     {
         If ((BLCT == Zero))
         {
             Local0 = One
             Local0 = RPIN (0x72)
             Local0 ^= One
             SPIN (0x72, Local0)
             If (ATKP)
             {
                 Local0 = (0x34 - Local0)
                 ^^^^ATKD.IANE (Local0)
             }
         }
         ElseIf ((BLCT == One))
         {
             If (ATKP)
             {
                 ^^^^ATKD.IANE (0x35)
             }
         }
     }
     (...)
 }
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7fa57ca443cffe81ce8416b57966bfb0370678a1 ]

When it's possible that the PF might end up trying to send a
packet to one of its own VFs, we have to forbid IPsec offload
because the device drops the packets into a black hole.
See commit 47b6f50077e6 ("ixgbe: disallow IPsec Tx offload
when in SR-IOV mode") for more info.

This really is only necessary when the device is in the default
VEB mode.  If instead the device is running in VEPA mode,
the packets will go through the encryption engine and out the
MAC/PHY as normal, and get "hairpinned" as needed by the switch.

So let's not block IPsec offload when in VEPA mode.  To get
there with the ixgbe device, use the handy 'bridge' command:
	bridge link set dev eth1 hwmode vepa
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2383a767c0ca06f96534456d8313909017c6c8d0 ]

Vega10 has multiple interrupt rings, so this can be called from multiple
calles at the same time resulting in:

[   71.779334] ================================
[   71.779406] WARNING: inconsistent lock state
[   71.779478] 4.19.0-rc1+ #44 Tainted: G        W
[   71.779565] --------------------------------
[   71.779637] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[   71.779740] kworker/6:1/120 [HC0[0]:SC0[0]:HE1:SE1] takes:
[   71.779832] 00000000ad761971 (&(&kfd->interrupt_lock)->rlock){?...},
at: kgd2kfd_interrupt+0x75/0x100 [amdgpu]
[   71.780058] {IN-HARDIRQ-W} state was registered at:
[   71.780115]   _raw_spin_lock+0x2c/0x40
[   71.780180]   kgd2kfd_interrupt+0x75/0x100 [amdgpu]
[   71.780248]   amdgpu_irq_callback+0x6c/0x150 [amdgpu]
[   71.780315]   amdgpu_ih_process+0x88/0x100 [amdgpu]
[   71.780380]   amdgpu_irq_handler+0x20/0x40 [amdgpu]
[   71.780409]   __handle_irq_event_percpu+0x49/0x2a0
[   71.780436]   handle_irq_event_percpu+0x30/0x70
[   71.780461]   handle_irq_event+0x37/0x60
[   71.780484]   handle_edge_irq+0x83/0x1b0
[   71.780506]   handle_irq+0x1f/0x30
[   71.780526]   do_IRQ+0x53/0x110
[   71.780544]   ret_from_intr+0x0/0x22
[   71.780566]   cpuidle_enter_state+0xaa/0x330
[   71.780591]   do_idle+0x203/0x280
[   71.780610]   cpu_startup_entry+0x6f/0x80
[   71.780634]   start_secondary+0x1b0/0x200
[   71.780657]   secondary_startup_64+0xa4/0xb0

Fix this by always using irq save spin locks.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f41a895026b8cb6f765190de7d2e7bc3ccbbd183 ]

[Why]

The igt@kms_plane@pixel-format-pipe tests can create a sequence where
stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results
in a null pointer dereference.

[How]

Guard against stream_state being NULL before accessing its fields. This
doesn't fix the root cause of the issue so a DRM_ERROR is generated
to still fail the tests.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NDavid Francis <David.Francis@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ed8dce4c6f726b7f3c6bf40859b92a9e32f189c1 ]

Keeping the irq_chip definition static will make it shared with multiple
giochips in the system. This practice is considered to be bad and now we
will get the below warning from gpiolib core:

"detected irqchip that is shared with multiple gpiochips: please fix the
driver."

Hence, move the irq_chip definition from static to `struct pl061` for
using a unique irq_chip for each gpiochip.
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>