- 19 4月, 2012 19 次提交
-
-
由 Stefan Behrens 提交于
The bitfield member mount_opt was too small by one bit to hold the mount option that enabled to include data extents in the integrity checker. Since the same issue happened when the BTRFS_MOUNT_PANIC_ON_FATAL_ERROR option was added (git rebase silently merges so that the increase of the size of the bitfield member is lost), the bit limit was removed entirely. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
-
由 Stefan Behrens 提交于
Each CRC or header error was counted twice, this is now fixed. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
-
由 Stefan Behrens 提交于
When a filesystem is mounted with the degraded option, it is possible that some of the devices are not there. btrfs_ioctl_dev_info() crashs in this case because the device name is a NULL pointer. This ioctl was only used for scrub. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
-
由 Arne Jansen 提交于
It is basically a good thing if we are interruptible when waiting for free space, but the generality in which it is implemented currently leads to system calls being interruptible that are not documented this way. For example git can't handle interrupted unlink(), leading to corrupt repos under space pressure. Instead we raise the bar to only be interruptible by SIGKILL. Thanks to David Sterba for suggesting this. Signed-off-by: NArne Jansen <sensille@gmx.net>
-
由 Dan Carpenter 提交于
The caller expects this function to return with the lock held and releases it immediately on error. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
-
由 Josef Bacik 提交于
A user reported a panic where we were trying to fix a bad mirror but the mirror number we were giving was 0, which is invalid. This is because we don't do the transid verification until after the read, so as far as the read code is concerned the read was a success. So instead store the mirror we read from so that if there is some failure post read we know which mirror to try next and which mirror needs to be fixed if we find a good copy of the block. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Julia Lawall 提交于
Free fs_devices as done in the error-handling code just below. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
-
由 Sergei Trofimovich 提交于
Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Josef Bacik <josef@redhat.com> Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
-
由 Ilya Dryomov 提交于
Fix a bug, where in case we need to adjust stripe_size so that the length of the resulting chunk is less than or equal to max_chunk_size, DUP chunks turn out to be only half as big as they could be. Cc: Arne Jansen <sensille@gmx.net> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Jan Schmidt 提交于
iref_to_path and iterate_irefs both increment the eb's refcount to use it after releasing the path. Both depend on consistent data remaining in the extent buffer and need a read lock to protect it. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Jan Schmidt 提交于
Avoid calling free_extent_buffer more than once when the iterator function returns non-zero. The only code that uses this is scrub repair for corrupted nodatasum blocks. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Jesper Juhl 提交于
Make free_ipath() behave like most other freeing functions in the kernel and gracefully do nothing when passed a NULL pointer. Besides this making the bahaviour consistent with functions such as kfree(), vfree(), btrfs_free_path() etc etc, it also fixes a real NULL deref issue in fs/btrfs/ioctl.c::btrfs_ioctl_ino_to_path(). In that function we have this code: ... ipath = init_ipath(size, root, path); if (IS_ERR(ipath)) { ret = PTR_ERR(ipath); ipath = NULL; goto out; } ... out: btrfs_free_path(path); free_ipath(ipath); ... If we ever take the true branch of that 'if' statement we'll end up passing a NULL pointer to free_ipath() which will subsequently dereference it and we'll go "Boom" :-( This patch will avoid that. Signed-off-by: NJesper Juhl <jj@chaosbits.net>
-
由 Li Zefan 提交于
clear_extent_bit() { next_node = rb_next(&state->rb_node); ... clear_state_bit(state); <-- this may free next_node if (next_node) { state = rb_entry(next_node); ... } } clear_state_bit() calls merge_state() which may free the next node of the passing extent_state, so clear_extent_bit() may end up referencing freed memory. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
Currently it returns a set of bits that were cleared, but this return value is not used at all. Moreover it doesn't seem to be useful, because we may clear the bits of a few extent_states, but only the cleared bits of last one is returned. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 David Sterba 提交于
Added in commit 49b25e05 ("btrfs: enhance transaction abort infrastructure") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 Liu Bo 提交于
Our code is not ready to cope with a sectorsize that's not equal to PAGE_SIZE. It will lead to hanging-on while writing something. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
-
由 Arne Jansen 提交于
Normally when there are 2 copies of a block, we add both to the reada extent tree and prefetch only the one that is easier to reach. This way we can better utilize multiple devices. In case of DUP this makes no sense as both copies reside on the same device. Signed-off-by: NArne Jansen <sensille@gmx.net>
-
由 Arne Jansen 提交于
When inserting into the radix tree returns EEXIST, get the existing entry without giving up the spinlock in between. There was a race for both the zones trees and the extent tree. Signed-off-by: NArne Jansen <sensille@gmx.net>
-
由 Li Zefan 提交于
Follow those instructions, and you'll trigger a warning in the beginning of d_set_d_op(): # mkfs.btrfs /dev/loop3 # mount /dev/loop3 /mnt # btrfs sub create /mnt/sub # btrfs sub snap /mnt /mnt/snap # touch /mnt/snap/sub touch: cannot touch `tmp': Permission denied __d_alloc() set d_op to sb->s_d_op (btrfs_dentry_operations), and then simple_lookup() reset it to simple_dentry_operations, which triggered the warning. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 13 4月, 2012 7 次提交
-
-
由 Josef Bacik 提交于
A user reported that booting his box up with btrfs root on 3.4 was way slower than on 3.3 because I removed the ideal caching code. It turns out that we don't load the free space cache if we're in a commit for deadlock reasons, but since we're reading the cache and it hasn't changed yet we are safe reading the inode and free space item from the commit root, so do that and remove all of the deadlock checks so we don't unnecessarily skip loading the free space cache. The user reported this fixed the slowness. Thanks, Tested-by: NCalvin Walton <calvin.walton@kepstin.ca> Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dave Jones 提交于
49b25e05 introduced a use-after-free bug that caused spurious -EIO's to be returned. Do the check before we free the transaction. Cc: David Sterba <dsterba@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
bio_alloc() has the possibility of returning NULL. So, it is necessary to check the return value. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Ilya Dryomov 提交于
This fixes a regression introduced by fc67c450. spin_is_locked() always returns 0 on UP kernels, which caused assert in get_restripe_target() to be fired on every call from btrfs_reduce_alloc_profile() on UP systems. Remove it completely for now, it's not clear if it's going to be needed in future. Reported-by: NBobby Powers <bobbypowers@gmail.com> Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org> Tested-by: NMitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
We miscalculate the length of extents we're discarding, and it leads to an eof of device. Reported-by: NDaniel Blueman <daniel@quora.org> Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
We'd have to be passing bogus extent buffers for this uninit variable to actually be used, but set it to zero just in case. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This reverts commit 5500cdbe. We've had a number of complaints of early enospc that bisect down to this patch. We'll hae to fix the reservations differently. CC: stable@kernel.org Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 3月, 2012 1 次提交
-
-
由 Chris Mason 提交于
Dave Sterba had put in patches to look for mixed data/metadata groups with metadata bigger than 4KB. But these ended up in the wrong place and it wasn't testing the feature flag correctly. This updates the tests to make sure our sizes are matching Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 3月, 2012 13 次提交
-
-
由 Liu Bo 提交于
When we use autodefrag, we forget to update the index which indicates the last page we've dirty. And we'll set dirty flags on a same set of pages again and again. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
$ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs/ -oautodefrag $ dd if=/dev/zero of=/mnt/btrfs/foobar bs=4k count=10 oflag=direct 2>/dev/null $ filefrag -v /mnt/btrfs/foobar Filesystem type is: 9123683e File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096) ext logical physical expected length flags 0 0 3072 10 eof /mnt/btrfs/foobar: 1 extent found Now we have a big real extent [0, 40960), but autodefrag will still defrag it. $ sync $ filefrag -v /mnt/btrfs/foobar Filesystem type is: 9123683e File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096) ext logical physical expected length flags 0 0 3082 10 eof /mnt/btrfs/foobar: 1 extent found So if we already find a big real extent, we're ok about that, just skip it. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
If our file's layout is as follows: | hole | data1 | hole | data2 | we do not need to defrag this file, because this file has holes and cannot be merged into one extent. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
$ mkfs.btrfs disk $ mount disk /mnt -o autodefrag $ dd if=/dev/zero of=/mnt/foobar bs=4k count=10 2>/dev/null && sync $ for i in `seq 9 -2 0`; do dd if=/dev/zero of=/mnt/foobar bs=4k count=1 \ seek=$i conv=notrunc 2> /dev/null; done && sync then we'll get to defrag "foobar" again and again. So does option "-o autodefrag,compress". Reasons: When the cleaner kthread gets to fetch inodes from the defrag tree and defrag them, it will dirty pages and submit them, this will comes to another DATA COW where the processing inode will be inserted to the defrag tree again. This patch sets a rule for COW code, i.e. insert an inode when we're really going to make some defragments. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
commit 600a45e1 (Btrfs: fix deadlock on page lock when doing auto-defragment) fixes the deadlock on page, but it also introduces another bug. A page may have been truncated after unlock & lock. So we need to find it again to get the right one. And since we've held i_mutex lock, inode size remains unchanged and we can drop isize overflow checks. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
The bug is from running xfstests 209 with autodefrag. The race is as follows: t1 t2(autodefrag) direct IO invalidate pagecache dio(old data) add_inode_defrag invalidate pagecache endio direct IO invalidate pagecache run_defrag readpage(old data) set page dirty (old data) dio(new data, rewrite) invalidate pagecache (*) endio t2(autodefrag) will get old data into pagecache via readpage and set pagecache dirty. Meanwhile, invalidate pagecache(*) will fail due to dirty flags in pages. So the old data may be flushed into disk by flush thread, which will lead to data loss. And so does the case of user defragment progs. The patch fixes this race by holding i_mutex when we readpage and set page dirty. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
This deadlock comes from xfstests 251. We'll hold the chunk_mutex throughout the whole of a chunk allocation. But if we find that we've used up system chunk space, we need to allocate a new system chunk, but this will lead to a recursion of chunk allocation and end up with a deadlock on chunk_mutex. So instead we need to allocate the system chunk first if we find we're in ENOSPC. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
o For space info, the type of space info is useful for debug. o For transaction handle, its transid is useful. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
With the big metadata blocks, we can have crc items that are much bigger than a page. There are a few places that we try to kmalloc memory to hold the items during a split. Items bigger than 4KB don't really have a huge benefit in efficiency, but they do trigger larger order allocations. This commits changes the csums to make sure they stay under 4KB. This is not a format change, just a #define to limit huge items. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Btrfs puts the filesystem metadata into its own address space, and somehow the block device address space isn't getting onto disk properly before a mount. The end result is that a loop of mkfs and mounting the filesystem will sometimes find stale or incorrect data. This commit should fix it by sprinkling fdatawrites and invalidate_bdev calls around. This is a short term measure to make sure it is fixed. The block devices really should be flushed and cleaned up higher in the stack. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.jan-o-sch.net/btrfs-unstable由 Chris Mason 提交于
Conflicts: fs/btrfs/transaction.c Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
-
由 Chris Mason 提交于
Conflicts: fs/btrfs/ctree.c fs/btrfs/disk-io.c fs/btrfs/extent-tree.c fs/btrfs/extent_io.c fs/btrfs/extent_io.h fs/btrfs/inode.c fs/btrfs/scrub.c Signed-off-by: NChris Mason <chris.mason@oracle.com>
-