- 24 5月, 2013 1 次提交
-
-
由 Lars-Peter Clausen 提交于
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJavier Martinez Canillas <javier@dowhile0.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 01 12月, 2011 1 次提交
-
-
由 JJ Ding 提交于
Commit 940ab889 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: NJJ Ding <dgdunix@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 08 9月, 2011 1 次提交
-
-
由 Yong Zhang 提交于
This flag is a NOOP and can be removed now. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 2月, 2011 1 次提交
-
-
由 Ben Hutchings 提交于
FREQ is a ridiculously short name for a platform-specific macro in a generic header, and it now conflicts with an enumeration in the gspca/ov519 driver. Also delete conditional reference to ixp4xx_get_board_tick_rate() which is not defined anywhere. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
-
- 29 7月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
ixp4xx_spkr_interrupt is not a timer interrupt and therefore should not use IRQF_TIMER. Use the recently introduced IRQF_NO_SUSPEND instead since that is the actual desired behaviour. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org LKML-Reference: <1280398595-29708-2-git-send-email-ian.campbell@citrix.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 3月, 2008 1 次提交
-
-
由 Alessandro Zummo 提交于
The following patch allows ixp4xx-beeper to be loaded by udev automatically when compiled as a module with kernel versions 2.4.24 and greater. This patch is required because 43cc71ee ("platform: prefix MODALIAS with "platform:"") changed the modalias string to have the extra prefix. LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4 looking at device '/devices/platform/ixp4xx-beeper.4': KERNEL=="ixp4xx-beeper.4" SUBSYSTEM=="platform" DRIVER=="" ATTR{modalias}=="platform:ixp4xx-beeper" udev therefore tries to modprobe platform:ixp4xx-beeper instead of ixp4xx-beeper. LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4 ... import_uevent_var: import into environment: 'PHYSDEVBUS=platform' import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper' main: looking at device '/devices/platform/ixp4xx-beeper.4' from subsystem 'platform' wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus' appeared after 0 loops main: run: 'socket:/org/kernel/udev/monitor' main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper' With this patch, depmod adds an alias line (see below) to modules.alias which allows modprobe to load the right module. alias platform:ixp4xx-beeper ixp4xx-beeper Signed-off-by: NGordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 3月, 2008 1 次提交
-
-
由 Gordon Farquharson 提交于
The following patch allows ixp4xx-beeper to be loaded by udev automatically when compiled as a module with kernel versions 2.4.24 and greater. This patch is required because commit 43cc71ee adds "platform:" to the modalias string. LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4 looking at device '/devices/platform/ixp4xx-beeper.4': KERNEL=="ixp4xx-beeper.4" SUBSYSTEM=="platform" DRIVER=="" ATTR{modalias}=="platform:ixp4xx-beeper" udev therefore tries to modprobe platform:ixp4xx-beeper instead of ixp4xx-beeper. LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4 ... import_uevent_var: import into environment: 'PHYSDEVBUS=platform' import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper' main: looking at device '/devices/platform/ixp4xx-beeper.4' from subsystem 'platform' wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus' appeared after 0 loops main: run: 'socket:/org/kernel/udev/monitor' main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper' With this patch, depmod adds an alias line (see below) to modules.alias which allows modprobe to load the right module. modules.alias: alias platform:ixp4xx-beeper ixp4xx-beeper Signed-off-by: NGordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 10月, 2007 1 次提交
-
-
由 Jiri Slaby 提交于
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: NJiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2007 1 次提交
-
-
由 Frederik Deweerdt 提交于
drivers/input/misc/ixp4xx-beeper.c: In function 'ixp4xx_spkr_event': drivers/input/misc/ixp4xx-beeper.c:54: error: 'input_dev' undeclared (first use in this function) drivers/input/misc/ixp4xx-beeper.c:54: error: (Each undeclared identifier is reported only once drivers/input/misc/ixp4xx-beeper.c:54: error: for each function it appears in.) Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 4月, 2007 2 次提交
-
-
由 Dmitry Torokhov 提交于
In preparation for struct class_device -> struct device input core conversion, switch to using input_dev->dev.parent when specifying device position in sysfs tree. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Use input_get_drvdata() and input_set_drvdata() instead. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 2月, 2006 1 次提交
-
-
由 Alessandro Zummo 提交于
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 30 1月, 2006 1 次提交
-
-
由 Alessandro Zummo 提交于
This is a driver for beeper found in LinkSys NSLU2 boxes. It should work on any ixp4xx based platform. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-