- 08 4月, 2013 19 次提交
-
-
由 Sridhar Samudrala 提交于
Update SCTP maintainers list. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Mathias Krause says: ==================== a few more info leak fixes in the recvmsg path. The error pattern here is the protocol specific recvmsg function is missing the msg_namelen assignment -- either completely or in early exit paths that do not result in errors in __sys_recvmsg()/sys_recvfrom() and, in turn, make them call move_addr_to_user(), leaking the then still uninitialized sockaddr_storage stack variable to userland. My audit was initiated by a rather coarse fix of the leak that can be found in the grsecurity patch, putting a penalty on protocols complying to the rules of recvmsg. So credits for finding the leak in the recvmsg path in __sys_recvmsg() should go to Brad! The buggy protocols/subsystems are rather obscure anyway. As a missing assignment of msg_namelen coupled with a missing filling of msg_name would only result in garbage -- the leak -- in case userland would care about that information, i.e. would provide a msg_name pointer. But obviously current userland does not. While auditing the code for the above pattern I found a few more 'uninitialized members' kind of leaks related to the msg_name filling. Those are fixed in this series, too. I have to admit, I failed to test all of the patches due to missing hardware, e.g. iucv depends on S390 -- hardware I've no access to :/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: George Zhang <georgezhang@vmware.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
In case we received no data on the call to skb_recv_datagram(), i.e. skb->data is NULL, vmci_transport_dgram_dequeue() will return with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the already existing msg_namelen assignment a few lines above. Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: George Zhang <georgezhang@vmware.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The code in set_orig_addr() does not initialize all of the members of struct sockaddr_tipc when filling the sockaddr info -- namely the union is only partly filled. This will make recv_msg() and recv_stream() -- the only users of this function -- leak kernel stack memory as the msg_name member is a local variable in net/socket.c. Additionally to that both recv_msg() and recv_stream() fail to update the msg_namelen member to 0 while otherwise returning with 0, i.e. "success". This is the case for, e.g., non-blocking sockets. This will lead to a 128 byte kernel stack leak in net/socket.c. Fix the first issue by initializing the memory of the union with memset(0). Fix the second one by setting msg_namelen to 0 early as it will be updated later if we're going to fill the msg_name member. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The code in rose_recvmsg() does not initialize all of the members of struct sockaddr_rose/full_sockaddr_rose when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. This will lead to leaking uninitialized kernel stack bytes in net/socket.c. Fix the issue by initializing the memory used for sockaddr info with memset(0). Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The code in llcp_sock_recvmsg() does not initialize all the members of struct sockaddr_nfc_llcp when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. Also, if the socket is in state LLCP_CLOSED or is shutting down during receive the msg_namelen member is not updated to 0 while otherwise returning with 0, i.e. "success". The msg_namelen update is also missing for stream and seqpacket sockets which don't fill the sockaddr info. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix the first issue by initializing the memory used for sockaddr info with memset(0). Fix the second one by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
In case msg_name is set the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Also the sax25_ndigis member does not get assigned, leaking four more bytes. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
For stream sockets the code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. The msg_namelen update is also missing for datagram sockets in case the socket is shutting down during receive. Fix both issues by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The L2TP code for IPv6 fails to initialize the l2tp_conn_id member of struct sockaddr_l2tpip6 and therefore leaks four bytes kernel stack in l2tp_ip6_recvmsg() in case msg_name is set. Initialize l2tp_conn_id with 0 to avoid the info leak. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about iucv_sock_recvmsg() not filling the msg_name in case it was set. Cc: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about irda_recvmsg_dgram() not filling the msg_name in case it was set. Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about caif_seqpkt_recvmsg() not filling the msg_name in case it was set. Cc: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
If the socket is in state BT_CONNECT2 and BT_SK_DEFER_SETUP is set in the flags, sco_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_recvmsg(). Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
In case the socket is already shutting down, bt_sock_recvmsg() returns with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the msg_namelen assignment in front of the shutdown test. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
When msg_namelen is non-zero the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Additionally the msg_namelen value is updated to sizeof(struct full_sockaddr_ax25) but is not always filled up to this size. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about vcc_recvmsg() not filling the msg_name in case it was set. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
Tetja Rediske found that if the host receives an ICMPv6 redirect message after sending a SYN+ACK, the connection will be reset. He bisected it down to 093d04d4 (ipv6: Change skb->data before using icmpv6_notify() to propagate redirect), but the origin of the bug comes from ec18d9a2 (ipv6: Add redirect support to all protocol icmp error handlers.). The bug simply did not trigger prior to 093d04d4, because skb->data did not point to the inner IP header and thus icmpv6_notify did not call the correct err_handler. This patch adds the missing "goto out;" in tcp_v6_err. After receiving an ICMPv6 Redirect, we should not continue processing the ICMP in tcp_v6_err, as this may trigger the removal of request-socks or setting sk_err(_soft). Reported-by: NTetja Rediske <tetja@tetja.de> Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 4月, 2013 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ...
-
由 Patrick McHardy 提交于
Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull GFS2 fixes from Steven Whitehouse: "There are two patches which fix up a couple of minor issues in the DLM interface code, a missing error path in gfs2_rs_alloc(), one patch which fixes a problem during "withdraw" and a fix for discards/FITRIM when using 4k sector sized devices." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Issue discards in 512b sectors GFS2: Fix unlock of fcntl locks during withdrawn state GFS2: return error if malloc failed in gfs2_rs_alloc() GFS2: use memchr_inv GFS2: use kmalloc for lvb bitmap
-
由 Mike Marciniszyn 提交于
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
-
由 Bob Peterson 提交于
This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Johan Hovold 提交于
This reverts commit 0ef1594c. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains slightly more volumes than usual at this stage, mostly because of my vacation in the last week. Nothing to scare, all small and/or trivial fixes: - Fix loop path handling in ASoC DAPM - Some memory handling fixes in ASoC core - Fix spear_pcm to adapt to the updated API - HD-audio HDMI ELD handling fixes - Fix for CM6331 USB-audio SRC change bugs - Revert power_save_controller option change due to user-space usage - A few other small ASoC and HD-audio fixes" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/generic - fix uninitialized variable Revert "ALSA: hda - Allow power_save_controller option override DCAPS" ALSA: hda - fix typo in proc output ALSA: hda - Enabling Realtek ALC 671 codec ALSA: usb: Work around CM6631 sample rate change bug ALSA: hda - bug fix on HDMI ELD debug message ALSA: hda - bug fix on return value when getting HDMI ELD info ASoC: dma-sh7760: Fix compile error ASoC: core: fix invalid free of devm_ allocated data ASoC: spear_pcm: Update to new pcm_new() API ASoC:: max98090: Remove executable bit ASoC: dapm: Fix pointer dereference in is_connected_output_ep() ASoC: pcm030 audio fabric: remove __init from probe ASoC: imx-ssi: Fix occasional AC97 reset failure ASoC: core: fix possible memory leak in snd_soc_bytes_put() ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff() ASoC: dapm: Fix handling of loops ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case
-
- 05 4月, 2013 11 次提交
-
-
由 Ralf Baechle 提交于
SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever supported its use and no libc was using it, so the entire sa-restorer functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.] for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid accidental reuse of the mask bit. Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear sa_restorer on execve] adds code that assumes sa_sigaction has an sa_restorer field, if SA_RESTORER is defined which would break MIPS. So remove the SA_RESTORER definition before the v3.8.4 merge. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> (cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8)
-
由 Deng-Cheng Zhu 提交于
The commit a96102be introduced set_isa() where compatible ISA info is also set aside from the one gets passed in. It means, for example, 1004K will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like the following inappropriate: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || c->isa_level == MIPS_CPU_ISA_M64R1 || c->isa_level == MIPS_CPU_ISA_M64R2) This patch fixes it. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 EunBong Song 提交于
Singed-off-by: NEunBong Song <eunb.song@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Bolle 提交于
CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename SNIPROM itself too. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org; Cc: linux-kernel@vger.kernel.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Bolle 提交于
Commit 7517de34 ("MIPS: Alchemy: Redo PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro. Also add a newline to a debugging printk that this fix enables. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Commit 58b69401 [MIPS: Function tracer: Fix broken function tracing] completely broke the function tracer for 64-bit kernels. The symptom is a system hang very early in the boot process. The fix: Remove/fix $sp adjustments for 64-bit case. Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Al Cooper <alcooperx@gmail.com> Cc: viric@viric.name Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Jiri Slaby 提交于
changed is not initialized in path_power_down_sync, but it is expected to be false in case no change happened in the loop. So set it to false. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiri Pirko 提交于
if userspace changes lifetime of address, send netlink notification and call notifier. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable <stable@vger.kernel.org> Signed-off-by: NJakub Kicinski <jakub.kicinski@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by: NKarel Srot <ksrot@redhat.com> Reported-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This reverts commit 14134f65. The problem that the above patch was meant to address is that af_unix messages are not being coallesced because we are sending unnecesarry credentials. Not sending credentials in maybe_add_creds totally breaks unconnected unix domain sockets that wish to send credentails to other sockets. In practice this break some versions of udev because they receive a message and the sending uid is bogus so they drop the message. Reported-by: NSven Joachim <svenjoac@gmx.de> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-