Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

When a file gets deleted on GFS2, if a node can't get an exclusive lock on the
file's iopen glock, it punts on actually freeing up the space, because another
node is using the file.  When it does this, it needs to drop the iopen glock
from its cache so that the other node can get an exclusive lock on it. Now,
gfs2_delete_inode() sets GL_NOCACHE before dropping the shared lock on the
iopen glock in preparation for grabbing it in the exclusive state.  Since the
node needs the glock in the exclusive state, dropping the shared lock from the
cache doesn't slow down the case where no other nodes are using the file.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

In fill_super() we hadn't MS_ACTIVE set yet, so there won't
be any inodes with zero i_count sitting around.

In put_super() we already have MS_ACTIVE removed *and* we
had called invalidate_inodes() since then.  So again there
won't be any inodes with zero i_count...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

XFS supports the "norecovery" mount option which is basically the
same as the GFS2 spectator mode. This adds support for "norecovery"
as a synonym for spectator mode, which is hopefully a more obvious
description of what it actually does.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This option has never done anything useful. Also at the same time
this cleans up the sb checks which are done at mount time. The
debug option will be accepted, but ignored in future. Since it
didn't do anything, there didn't seem much point in retaining it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This option defaulted to on for lock_nolock mounts and off
otherwise. The only function was to avoid the revalidation of
dentries. In the cluster case, that is entirely pointless and
liable to cause coherency problems.

The patch changes the revalidation to depend upon whether the
fs is a local or cluster fs (i.e. it follows the existing default
behaviour). I very much doubt anybody ever used this option as
there is no reason to. Even so we will continue to accept it
on the mount command line, but ignore it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is been a no-op for a very long time now. I'm pretty sure
nobody uses it, but just in case we'll still accept it on the
command line, but ignore it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

... and let iput_final() do the actual eviction or retention
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Function gfs2_write_alloc_required always returned zero as its
return code.  Therefore, it doesn't need to return a return code
at all.  Given that, we can use the return value to return whether
or not the dinode needs block allocations rather than passing
that value in, which in turn simplifies a bunch of error checking.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The following patch adds a message to indicate when barriers have been
disabled due to a block device which doesn't support them. You could
already tell this via the mount options in /proc/mounts, but all the
other filesystems also log a message at the same time.

Also, the same mechanisms are used to indicate when the lock
demote interface has been used (only ever used for debugging)
which is a request from our support team.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing.  Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.

This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes.  Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched.  If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currenly sync_quota_sb does a lot of sync and truncate action that only
applies to "VFS" style quotas and is actively harmful for the sync
performance in XFS.  Move it into vfs_quota_sync and add a wait parameter
to ->quota_sync to tell if we need it or not.

My audit of the GFS2 code says it's also not needed given the way GFS2
implements quotas, but I'd be happy if this can get a detailed review.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

As a consequence of the previous patch, we can now remove the
loop which used to be required due to the circular dependency
between the inodes and glocks. Instead we can just invalidate
the inodes, and then clear up any glocks which are left.

Also we no longer need the rwsem since there is no longer any
danger of the inode invalidation calling back into the glock
code (and from there back into the inode code).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.

The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).

This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.

This results in three major improvements:
 1. A saving of approx 25% of memory used in caching inodes
 2. A removal of the circular dependency between inodes and glocks
 3. No confusion between "normal" and "metadata" inodes in super.c

Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Although all glocks are, by the time of the umount glock wait,
scheduled for demotion, some of them haven't made it far
enough through the process for the original set of waiting
code to wait for them.

This extends the ref count to the whole glock lifetime in order
to ensure that the waiting does catch all glocks. It does make
it a bit more invasive, but it seems the only sensible solution
at the moment.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch adds a wait on umount between the point at which we
dispose of all glocks and the point at which we unmount the
lock protocol. This ensures that we've received all the replies
to our unlock requests before we stop the locking.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Reported-by: NFabio M. Di Nitto <fdinitto@redhat.com>

Since the default is barriers on, this only displays the
nobarrier option when that is active.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Currently gfs2 issues barrier unconditionally.  There are various reasons
to disable them, be that just for testing or for stupid devices flushing
large battert backed caches.  Add a nobarrier option that matches xfs and
btrfs for this.  Also add a symmetric barrier option to turn it back on
at remount time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

It's not necessary to do any 64bit division for the statfs sync code, so
remove it.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

GFS2 now has three new mount options, statfs_quantum, quota_quantum and
statfs_percent.  statfs_quantum and quota_quantum simply allow you to
set the tunables of the same name.  Setting setting statfs_quantum to 0
will also turn on the statfs_slow tunable.  statfs_percent accepts an
integer between 0 and 100.  Numbers between 1 and 100 will cause GFS2 to
do any early sync when the local number of blocks free changes by at
least statfs_percent from the totoal number of blocks free.  Setting
statfs_percent to 0 disables this.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

These two functions are altered so that gfs2_quota_sync may
in future be called directly from the VFS. The GFS2 superblock
changes to a VFS super block and there is an addition of an int
argument which is currently ignored.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We have a long term plan to use the "-o meta" flag to GFS2 mounts to
access the alternate root which is used to store metadata for a GFS2
filesystem. This will allow us to eventually remove support for the
gfs2meta filesystem type (which is in any case just a "front end" to
the gfs2 filesystem type with the meta/master root).

Currently the "-o meta" option is only taken into account on the
initial mount of the filesystem. Subsequent mounts of the same
filesystem (i.e. on the same device) result in basically the same
as bind mounting the root of the original mount.

This patch changes that by using what is more or less a copy
of get_sb_bdev() and extending it so that it will take into
account the alternate root in all cases. The main difference
is that we have to parse the mount options a bit earlier. We can
then use them to select the appropriate root towards the end of
the function.

In addition this also fixes a bug where it was possible (but certainly
not desirable) to set different ro/rw options for the meta root
when mounted via the gfs2meta fs compared with the original mount.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>

There is a potential race in the inode deallocation code if two
nodes try to deallocate the same inode at the same time. Most of
the issue is solved by the iopen locking. There is still a small
window which is not covered by the iopen lock. This patches fixes
that and also makes the deallocation code more robust in the face of
any errors in the rgrp bitmaps, or erroneous iopen callbacks from
other nodes.

This does introduce one extra disk read, but that is generally not
an issue since its the same block that must be written to later
in the deallocation process. The total disk accesses therefore stay
the same,
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The inum structure used throughout GFS2 has two fields. One
no_addr is the disk block number of the inode in question and
is used everywhere as the inode number. The other, no_formal_ino,
is used only as the generation number for NFS.

Historically the no_formal_ino field was set using a complicated
system of one global and one per-node file containing inode numbers
in order to ensure that each no_formal_ino was unique. Also this
code made no provision for what would happen when eventually the
(64 bit) numbers ran out. Now I know that is pretty unlikely to
happen given the large space of numbers, but it is possible
nevertheless.

The only guarantee required for no_formal_ino is that, for any
single inode, the same number doesn't get reused too quickly.

We already have a generation number which is kept in the inode
and initialised from a counter in the resource group (almost
no overhead, since we have to touch the resource group anyway
in order to allocate an inode in the first place). Aside from
ensuring that we never use the value 0 in the no_formal_ino
field, we can use that counter directly.

As a result of that change, we lose about 200 lines of code and
also gain about 10 creates/sec on the postmark benchmark (on
my test machine).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Use the more conventional name for the extended attribute
support code. Update all the places which care.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch adds "-o errors=panic" and "-o errors=withdraw" to the
gfs2 mount options.  The "errors=withdraw" option is today's
current behaviour, meaning to withdraw from the file system if a
non-serious gfs2 error occurs.  The new "errors=panic" option
tells gfs2 to force a kernel panic if a non-serious gfs2 file
system error occurs.  This may be useful, for example, where
fabric-level fencing is used that has no way to reboot (such as
fence_scsi).
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We already have an offline uevent (used when a withdraw occurs)
but no online uevent. This adds an online uevent so that userspace
will be able to detect a successful mount by means other than
not receiving a remove event after the add & recovery (change)
uevents.

It has also been added to the remount path as well - we can't use
a change uevent there as older GFS2 userspace acts on change uevents
according to the state that it thinks the fs is in, so we can't
easily add any new ones.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When a file is deleted from a gfs2 filesystem on one node, a dcache
entry for it may still exist on other nodes in the cluster. If this
happens, gfs2 will be unable to free this file on disk. Because of this,
it's possible to have a gfs2 filesystem with no files on it and no free
space. With this patch, when a node receives a callback notifying it
that the file is being deleted on another node, it schedules a new
workqueue thread to remove the file's dcache entry.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

GFS2 wasn't syncing its statfs info on grows.  This causes a problem
when you grow the filesystem on multiple nodes.  GFS2 would calculate
the new space based on the resource groups (which are always current),
and then assume that the filesystem had grown the from the existing
statfs size.  If you grew the filesystem on two different nodes in a
short time, the second node wouldn't see the statfs size change from the
first node, and would assume that it was grown by a larger amount than
it was.  When all these changes were synced out, the total fileystem
size would be incorrect (the first grow would be counted twice).

This patch syncs makes GFS2 read in the statfs changes from disk before
a grow, and write them out after the grow, while the master statfs inode
is locked.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

It is not required here.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat,com>
Cc: Christoph Hellwig <hch@infradead.org>

Move BKL into ->put_super from the only caller.  A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment.  Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.

[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

mount.c only contained a single function, so is not really
worth retaining on its own. All of the super related code
is now either in super.c or ops_fstype.c
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes some old code that was causing issues during
filesystem freeze.
Reported-by: NAndrew Price <andy@andrewprice.me.uk>
Tested-by: NAndrew Price <andy@andrewprice.me.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
 o Reducing overhead by eliminating duplicated fields between structures
 o Simplifcation of the code (reduces the code size by a fair bit)
 o The locking interface is now the DLM interface itself as proposed
   some time ago.
 o Fewer lookups of glocks when processing replies from the DLM
 o Fewer memory allocations/deallocations for each glock
 o Scope to do further optimisations in the future (but this patch is
   more than big enough for now!)

Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.

This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This reverts commit 78802499912f1ba31ce83a94c55b5a980f250a43.

The original patch is causing problems in relation to order of
operations at umount in relation to jdata files. I need to fix
this a different way.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>