[ Upstream commit 65895b67ad27df0f62bfaf82dd5622f95ea29196 ]

page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.

Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:

  mlx5e_poll_tx_cq
  |
   --16.34%--napi_consume_skb
             |
             |--12.65%--__free_pages_ok
             |          |
             |           --11.86%--free_one_page
             |                     |
             |                     |--10.10%--queued_spin_lock_slowpath
             |                     |
             |                      --0.65%--_raw_spin_lock
             |
             |--1.55%--page_frag_free
             |
              --1.44%--skb_release_data

Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator.  The lock contention happens during mlx5 DMA TX completion
cycle.  And the page allocator cannot keep up at these speeds.[2]

I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]

The free path as pointed out by Jesper is:
skb_free_head()
  -> skb_free_frag()
    -> page_frag_free()
And the pages being freed on this path are order-0 pages.

Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.

With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone.  Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.

[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.comSigned-off-by: NAaron Lu <aaron.lu@intel.com>
Reported-by: NPawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Acked-by: NPankaj gupta <pagupta@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 ]

Commit fa5e084e ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim().  The original return value 0 means NODE_RECLAIM_SOME
after this commit.

While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed.  This will leads to call zone_watermark_ok() again.

This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.

Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d85400af790dba2aa294f0a77e712f166681f977 ]

Dirty flag of the journal should be cleared at the last stage of umount,
if do it before jbd2_journal_destroy(), then some metadata in uncommitted
transaction could be lost due to io error, but as dirty flag of journal
was already cleared, we can't find that until run a full fsck.  This may
cause system panic or other corruption.

Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]

This patch fixes potential double frees if register_hdlc_device() fails.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Reviewed-by: NPeng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92ee77d148bf06d8c52664be4d1b862583fd5c0e ]

When acpi_match_device fails, its return value is NULL. Directly using
the return value without a check may result in a NULL-pointer
dereference. The fix checks if acpi_match_device fails, and if so,
returns -EINVAL.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46273cf7e009231d2b6bc10a926e82b8928a9fb2 ]

genlmsg_put could fail. The fix inserts a check of its return value, and
if it fails, returns -EMSGSIZE.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff07d48d7bc0974d4f96a85a4df14564fb09f1ef ]

atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e49505f7255be8ced695919c08a29bf2c3d79616 ]

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f86a3b83833e7cfe558ca4d70b64ebc48903efec ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d822f2dbab7f4c820f72eb8570aacf3f35855bd ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 550ed0e2036663b35cec12374b835444f9c60454 ]

Both do more or less the same thing and are mutually exclusive.
If both are enabled the build will fail.
Sooner or later we can kill UML's GCOV.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0053102a869f1b909904b1b85ac282e2744deaab ]

sys/uio.h gives us writev(), otherwise the build might fail on
some systems.

Fixes: 49da7e64 ("High Performance UML Vector Network Driver")
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b32e019049e959ee10ec359893c9dd5d057dad55 ]

If user change inode's i_flags via ioctl, let's add it into global
dirty list, so that checkpoint can guarantee its persistence before
fsync, it can make checkpoint keeping strong consistency.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9249dded7b5cb539a8c8698b25d08a3c15261470 ]

Should use lstart (logical start address) instead of start (in dev) here.
This fixes a bug in multi-device scenarios.
Signed-off-by: NQiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0eb987c874dc93f9c9d85a6465dbde20fdd3884c ]

In net_ns_init(), register_pernet_subsys() could fail while registering
network namespace subsystems. The fix checks the return value and
sends a panic() on failure.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 89dfd0083751d00d5d7ead36f6d8b045bf89c5e1 ]

In tipc_nl_compat_sk_dump(), if nla_parse_nested() fails, it could return
an error. To be consistent with other invocations of the function call,
on error, the fix passes the return value upstream.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b0f17570b8203c22f139459c86cfbaa0311313ed ]

Commit e39c0df1 ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2326828ee40357b3d2b1359b8ca7526af201495b ]

The following build warnings are seen when building for ARM64 allmodconfig:

drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Fix them by using the %zu specifier to print a size_t variable and using
a plain %x to print the result of a readl().
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 505a314fb28ce122091691c51426fa85c084e115 ]

HMIs will crash the kernel due to

	BRANCH_LINK_TO_FAR(hmi_exception_realmode)

Calling into the OPD instead of the actual code.

Fixes: 2337d207 ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts")
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Use DOTSYM() rather than #ifdef]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 47918bc68b7427e961035949cc1501a864578a69 ]

In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]

When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.

This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77ea5f4cbe2084db9ab021ba73fb7eadf1610884 ]

The frame_size passed to build_skb must be aligned, else it is
possible that the embedded struct skb_shared_info gets unaligned.

For correctness make sure that xdpf->headroom in included in the
alignment. No upstream drivers can hit this, as all XDP drivers provide
an aligned headroom.  This was discovered when playing with implementing
XDP support for mvneta, which have a 2 bytes DSA header, and this
Marvell ARM64 platform didn't like doing atomic operations on an
unaligned skb_shinfo(skb)->dataref addresses.

Fixes: 1c601d82 ("bpf: cpumap xdp_buff to skb conversion and allocation")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d5108e69fe013ff47ab815b849caba9cc33ca1e5 ]

Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.

Fixes: 0b1e5b99 ("IB/rxe: Add port protocol stats")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c38f035117331eb78d0504843c79ea7c7fabf37 ]

print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.

Fix this by using 'enum drbd_state_rv' in the prototype too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NRoland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]

"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.

When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.

If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).

Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe43ed97bba3b11521abd934b83ed93143470e4f ]

Multiple failure scenario:
a) all good
   Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
   Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
   changes only make it to the Secondary storage.
d) lose disk on Secondary,
   Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
 - I don't have a current size myself
 - we agree on the size anyways
 - I do have a current size, am Secondary, and he has the only disk
 - I do have a current size, am Primary, and he has the only disk,
   which is larger than my current size
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]

The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.

This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]

As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.

This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 72e7bcc2cdf82bf03caaa5e6c9b0134c2fc2ee7d ]

When building for ppc32 with clang these flags are unsupported:

  -ffixed-r2 and -mmultiple

llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on
when building for SVR4ABI and !ppc64:

  // The SVR4 ABI reserves r2 and r13
  if (Subtarget.isSVR4ABI()) {
    // We only reserve r2 if we need to use the TOC pointer. If we have no
    // explicit uses of the TOC pointer (meaning we're a leaf function with
    // no constant-pool loads, etc.) and we have no potential uses inside an
    // inline asm block, then we can treat r2 has an ordinary callee-saved
    // register.
    const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
    if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm())
      markSuperRegs(Reserved, PPC::R2);  // System-reserved register
    markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register
  }

This means we can safely omit -ffixed-r2 when building for 32-bit
targets.

The -mmultiple/-mno-multiple flags are not supported by clang, so
platforms that might support multiple miss out on using multiple word
instructions.

We wrap these flags in cc-option so that when Clang gains support the
kernel will be able use these flags.

Clang 8 can then build a ppc44x_defconfig which boots in Qemu:

  make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-  ppc44x_defconfig
  ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT
  make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-

  qemu-system-ppc -M bamboo \
   -kernel arch/powerpc/boot/zImage \
   -dtb arch/powerpc/boot/dts/bamboo.dtb \
   -initrd ~/ppc32-440-rootfs.cpio \
   -nographic -serial stdio -monitor pty -append "console=ttyS0"

Link: https://github.com/ClangBuiltLinux/linux/issues/261
Link: https://bugs.llvm.org/show_bug.cgi?id=39556
Link: https://bugs.llvm.org/show_bug.cgi?id=39555Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d46d4877b1afd14059393a48bdb8ce27955174c ]

Raw event code has couple of fields "unit" and "cache" in it, to capture
the "unit" to monitor for a given pmcxsel and cache reload qualifier to
program in MMCR1.

isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3)
Event bus control fields with "cache" bits of the raw event code.
These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap
the checks to be power8 specific. Also, "cache" bit field is referred to
update MMCR1[16:17] and this check can be power8 specific.

Fixes: 7ffd948f ('powerpc/perf: factor out power8 pmu functions')
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]

When ath6kl was reworked to share code between regular and scheduled scans
in commit 3b8ffc6a ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]

Commit dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.

Fixes: dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 861cb5eb467f5e38dce1aabe4e8db379255bd89b ]

Since commit 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with
hostapd (device_ap_sme=1 use_monitor=0):

brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52

So add the missing mgmt_stypes for AP mode to fix this.

Fixes: 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
Suggested-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.
Signed-off-by: NAnatoliy Glagolev <glagolig@gmail.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>