* Add ide_hwifs[] entry initialization to ide_find_port_slot()
  and remove ide_init_port_data() calls from host drivers.

* Unexport ide_init_port_data().

* Remove no longer needed init_ide_data().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove drive->ctl (it is always equal to 0x08 after init time).

While at it:

* Use ATA_DEVCTL_OBS define.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "ide=" kernel parameters.

* Remove no longer needed:
  - ide_setup()
  - parse_options()
  - __setup("", ...)
  - module_param(options, ...)

* Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef.

* Make ide_*acpi* and ide_doubler variables static.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove no longer need init_ide_data() call from ide_setup().

* Cleanup init_ide_data().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "hdx=" kernel parameters.

* Remove no longer used stridx() and match_parm().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idebus=" kernel parameter.

* Remove no longer needed ide_system_bus_speed() and system_bus_clock()
  (together with idebus_parameter and system_bus_speed variables).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This converts the ide_do_drive_cmd path using ide_[head_]wait to use
blk_execute_rq.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set REQ_PREEMPT request flag in ide_do_drive_cmd() users
  for ide_preempt and ide_head_wait action types.

* Remove setting REQ_PREEMPT from ide_do_drive_cmd().

While at it:

* Set 'where' variable outside ide_lock.

This is a preparation for converting IDE to use blk_execute_rq().

There should be no functional changes caused by this patch.

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Holding ide_lock for ide_release_dma_engine() call is unnecessary
and triggers WARN_ON(irqs_disabled()) in dma_free_coherent().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix ide_unregister() to work for ports with no devices attached to them.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

class->dev_release is called by device_release() iff dev->release
is not present so ide_port_class_release() is never called and the
last hwif->gendev reference is not dropped.

Fix it by removing ide_port_class_release() and get_device() call
from ide_register_port() (device_create_drvdata() takes a hwif->gendev
reference anyway).

This patch fixes hang on wait_for_completion(&hwif->gendev_rel_comp)
in ide_unregister() reported by Pavel Machek.

Cc: Pavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This converts ide to use blk_rq_init to initialize the request.

This is a preparation for large command support, which needs to
initialize the request in a proper way (that is, just doing a memset()
will not work).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* Add struct ide_io_ports and use it instead of `unsigned long io_ports[]`
  in ide_hwif_t.

* Rename io_ports[] in hw_regs_t to io_ports_array[].

* Use un-named union for 'unsigned long io_ports_array[]' and 'struct
  ide_io_ports io_ports' in hw_regs_t.

* Remove IDE_*_OFFSET defines.

v2:
* scc_pata.c build fix from Stephen Rothwell.

v3:
* Fix ctl_adrr typo in Sparc-specific part of ns87415.c.
  (Noticed by Andrew Morton)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make ide_unregister() take 'ide_hwif_t *hwif' instead of 'unsigned int
  index' (hwif->index) as an argument and update all users accordingly.

While at it:

* Remove unnecessary checks for hwif != NULL from ide-pnp.c::idepnp_remove()
  and delkin_cb.c::delkin_cb_remove().

* Remove needless hwif->chipset assignment from scc_pata.c::scc_remove().

v2:
* Fixup ide_unregister() documentation.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove ide_unregister() call from ide_exit()
  (host drivers take care of unregistering hwif-s themselves).

* Remove ide_unregister() call from probe methods of
  bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers
  (ide_find_port() returns only free ide_hwifs[] entries).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Rename ide_noacpi{tfs,onboot} to ide_acpi{gtf,onboot} (+ reverse logic).

* Move ide_*acpi* variables to ide-acpi.c and remove unnecessary initializers.

* Add "noacpi" / "acpigtf" / "acpionboot" parameters.

* Obsolete "ide=noacpi" / "ide=acpigtf" / "ide=acpionboot" kernel parameters.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "doubler" parameter to enable support for IDE doublers.

* Obsolete "ide=doubler" kernel parameter.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "cdrom=" and "chs=" parameters.

* Obsolete "hdx=cdrom" and "hdx=cyls,heads,sects" kernel parameters.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "nodma|noflush|noprobe|nowerr=" parameters.

* Obsolete "hdx=noprobe|none|nowerr|nodma|noflush" kernel parameters.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "hdx=autotune" kernel parameter
  (we always auto-tune PIO if possible nowadays).

* Remove no longer needed ide_drive_t.autotune flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

We have "vlb|pci_clock=" parameters now.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz).

* Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz).

While at it:

* qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "hdx=noautotune" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then make ide_hwif_t.autotune a single bit flag
and remove no longer needed IDE_TUNE_* defines.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=" kernel parameters.

* Make probe_* and cmd640_vlb variables static.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=serialize" kernel parameter
(it has been obsoleted since 1 Nov 2004).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add "ignore_cable" parameter:

* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
  (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")

* "ignore_cable=[interface_number]" module parameter (for ide_core module)
  if IDE is compiled as module

v2:
* Add ide_port_apply_params() helper
  - use it in ide_device_add_all() and ide_scan_port().

* Make it possible to later disable ignoring cable detection by passing
  "[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
  (however sysfs interface is not enabled yet since it needs some other
   IDE changes to make it work reliable).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove no longer used ide_hwif_request_regions() and hwif_request_region().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Reserve PCI BARs 0-3 (0-1 for single port controllers) in
  ide_pci_enable() and remove ide_hwif_request_regions() call
  from ide_device_add_all() (also cleanup resource management
  in scc_pata host driver).

* Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup
  ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver)
  and remove ide_release[_iomio]_dma().

v2:
* Fixup trm290 host driver.

v3:
* Because of scc_pata host driver changes we need to call
  pci_request_selected_regions() also in setup_mmio_scc().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All host drivers using ide_unregister()/module_exit() have been fixed
to manage resources themselves so this function can be removed now.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Update IDE PMAC host driver to use drive->noprobe instead of hwif->noprobe
and remove hwif->noprobe completely (it is always set to zero now).

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move hooks for port/host specific methods from ide_hwif_t to
  'struct ide_port_ops'.

* Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info'
  and ide_hwif_t.

* Update host drivers and core code accordingly.

While at it:

* Rename ata66_*() cable detect functions to *_cable_detect() to match
  the standard naming. (Suggested by Sergei Shtylyov)

v2:
* Fix build for bast-ide. (Noticed by Andrew Morton)
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Check for IDE_HFLAG_NO_SET_MODE host flag in ide_set_pio(),
  ide_set_[pio,dma]_mode(), ide_set_xfer_rate() and set_pio_mode().

* Remove no longer needed IDE_HFLAG_NO_SET_MODE host flag checking
  from ide_tune_dma().

* Remove superfluous ->set_pio_mode checking from do_special().

This is a part of preparations for adding 'struct ide_port_ops'.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All host drivers now either set hwif->mmio or reserve continuous
I/O resources so remove no longer needed hwif->straight8 flag
and never reached code for 'hwif->straight8 == 0' case.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All modular users have been fixed to not reference ide_hwifs[] directly.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Change ide_match_hwif() argument from 'u8 bootable' to
  'struct ide_port_info *d'.

* Move ide_match_hwif() to ide-probe.c from setup-pci.c and rename
  it to ide_find_port_slot().  Update some comments while at it.

* ide_find_port() can be now just a wrapper for ide_find_port_slot().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove no longer needed matching against I/O base and 'base' argument.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make CONFIG_IDE_GENERIC depended on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS.

* Move default IDE ports setup from init_ide_data() to ide_generic.

* Use ide_init_port_hw() in ide_generic.

* Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=noprobe" kernel parameter.

* Remove no longer needed hwif->noprobe quirk from ide_hwif_configure()
  and hwif->noprobe checking from cmd640.c.

v2:
* "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>