This patch splits the pll configs up on pll versions. This allows
easy adding of other known good pll values. Additionally it made it
possible to remove invalid configurations resulting in better
behaviour for such cases. The resulting clocks are no longer stored
resulting in some computing overhead on each mode change.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The clocks can be easily recalculated by the timing and refresh value.
This brings us one step closer to removing VIAs modetable and use
generic ones and being easier extensible.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Before this patch only clocks that perfectly match were used and if
none existed this was not handled properly. This patch changes this
to always use the closest clock supported. This should behave like
before for clocks that have a perfect match but be much saner for
clocks which are slightly off.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes the direct lookup table for resolution+refresh and
pixclock by calculating this information from the mode table. Removes a
lot of dupllication and error potential by just doing a little more
calculations on each mode change.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

These parameters are the same for all currently known VIA IGPs so it
does not make any sense to store them with IGP specific data. This
saves a few bytes and helps a bit in dicovering the real differences.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes some write-only variables from the device management
structures. Just a small cleanup.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch is a little cleanup for the chip_info structures.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes all internal uses of another mostly artificial
value. It does duplicate the information of the maximum resolution and
it is not flexible as only a few resolutions exist. Hence it is better
to remove it and clean the mess up.
No runtime change expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Many local variables should be declared static.
Found by sparse, compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This driver is not respecting the iomem memory space restrictions
and does direct access. This works on x86 but is non-portable and
should not be done.  Converted memcpy() of 2 to readw.
Last post increment of romptr was unnecessary since pointer never
used after that.

Found by sparse, compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes an assignment to the deprecated i2c_adapter.id
field. Since the field isn't used anywhere else in the driver it is
save to remove it.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This reverts commit c4ff4b82.

Ted Ts'o reports:

 "TPM is working for me so I can log into employer's network in 2.6.37.
  It broke when I tried 2.6.38-rc6, with the following relevant lines
  from my dmesg:

  [   11.081627] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
  [   25.734114] tpm_tis 00:0b: Operation Timed out
  [   78.040949] tpm_tis 00:0b: Operation Timed out

  This caused me to get suspicious, especially since the _other_ TPM
  commit in 2.6.38 had already been reverted, so I tried reverting
  commit c4ff4b82: "TPM: Long default timeout fix".  With this commit
  reverted, my TPM on my Lenovo T410 is once again working."
Requested-and-tested-by: NTheodore Ts'o <tytso@mit.edu>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (adt7411) add MODULE_DEVICE_TABLE
  hwmon: (ad7414) add MODULE_DEVICE_TABLE

Fix new kernel-doc warning in fs/block_dev.c:

Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several ACPI drivers fail to build if CONFIG_NET is unset, because
they refer to things depending on CONFIG_THERMAL that in turn depends
on CONFIG_NET.  However, CONFIG_THERMAL doesn't really need to depend
on CONFIG_NET, because the only part of it requiring CONFIG_NET is
the netlink interface in thermal_sys.c.

Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET
and remove the dependency of CONFIG_THERMAL on CONFIG_NET from
drivers/thermal/Kconfig.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <lenb@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Luming Yu <luming.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: prcm: Fix the CPUx clockdomain offsets
  OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER
  OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
  OMAP2+: mailbox: fix lookups for multiple mailboxes
  OMAP2420: mailbox: fix IVA vs DSP IRQ numbering
  mach-omap2: smartreflex: world-writable debugfs voltage files
  mach-omap2: pm: world-writable debugfs timer files
  mach-omap2: mux: world-writable debugfs files

Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf timechart: Fix max number of cpus
  perf timechart: Fix black idle boxes in the title
  perf hists: Print number of samples, not the period sum

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Use u32 instead of long to set reset vector back to 0

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: Prevent oneshot mode when broadcast device is periodic

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix truncate after open
  fuse: fix hang of single threaded fuseblk filesystem

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Check heartbeat mode for kernel stacks only
  Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number.
  ocfs2: Fix estimate of necessary credits for mkdir

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  eukrea-tlv320: fix platform_name
  ASoC: correct pxa AC97 DAI names
  ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs
  ALSA: HDA: Add ideapad quirk for two Dell machines
  ALSA: HDA: Add a new Conexant codec 506e (20590)
  ALSA: usb-audio: fix oops due to cleanup race when disconnecting
  ASoC: Hook wm_hubs micbiases up to CLK_SYS
  ASoC: Correct definition of WM8903_VMID_RES_5K
  ASoC: Fix WM8958 default microphone detection argument ordering
  ALSA: HDA: Fix mic initialization in VIA auto parser
  ALSA: fix one memory leak in sound jack

Commit e2cda322 ("thp: add pmd mangling generic functions") replaced
some macros in <asm-generic/pgtable.h> with inline functions.

If the functions are to be defined (not all architectures need them)
then struct vm_area_struct must be defined first.  So include
<linux/mm_types.h>.

Fixes a build failure seen in Debian:

    CC [M]  drivers/media/dvb/mantis/mantis_pci.o
  In file included from arch/arm/include/asm/pgtable.h:460,
                   from drivers/media/dvb/mantis/mantis_pci.c:25:
  include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young':
  include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A customer of ours, complained that when setting the reset
vector back to 0, it trashed other data and hung their box.
They noticed when only 4 bytes were set to 0 instead of 8,
everything worked correctly.

Mathew pointed out:

 |
 | We're supposed to be resetting trampoline_phys_low and
 | trampoline_phys_high here, which are two 16-bit values.
 | Writing 64 bits is definitely going to overwrite space
 | that we're not supposed to be touching.
 |

So limit the area modified to u32.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently numcpus is determined in pid_put_sample which is only
called on sched_switch/sched_wakeup sample processing.

On a machine with a lot cpus I often saw the last cpu missing.

Check for (max) numcpus on every event happening and in the
beginning. -> fixes the issue for me.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.

Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

This fixes CVE-2011-1013.

Reported-by: Matthiew Herrb (OpenBSD X.org team)
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Somehow fixes a misrendering + hang at GDM startup on my NVA8...

My first guess would have been stale TLB entries laying around that a new
bo then accidentally inherits.  That doesn't make a great deal of sense
however, as when we mapped the pages for the new bo the TLBs would've
gotten flushed anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The device table is required to load modules based on modaliases.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

The device table is required to load modules based on modaliases.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.

Add the necessary check to tick_is_oneshot_available().
Reported-and-tested-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6>
Cc: stable@kernel.org # .21 ->

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset

Fixes sysfs config attribute to allow access to entire 16MB maintenance
space of RapidIO devices.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Initialize ts_real.flags to fix compiler warning about possible
uninitialized use of this field.
Signed-off-by: NAlexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It seems odd that truncate_inode_pages_range(), called not only when
truncating but also when evicting inodes, has mem_cgroup_uncharge_start
and _end() batching in its second loop to clear up a few leftovers, but
not in its first loop that does almost all the work: add them there too.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The THP code didn't pass the correct interleaving shift to the memory
policy code.  Fix this here by adjusting for the order.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A race can occur when io_submit() races with io_destroy():

 CPU1						CPU2
io_submit()
  do_io_submit()
    ...
    ctx = lookup_ioctx(ctx_id);
						io_destroy()
    Now do_io_submit() holds the last reference to ctx.
    ...
    queue new AIO
    put_ioctx(ctx) - frees ctx with active AIOs

We solve this issue by checking whether ctx is being destroyed in AIO
submission path after adding new AIO to ctx.  Then we are guaranteed that
either io_destroy() waits for new AIO or we see that ctx is being
destroyed and bail out.

Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>