Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 07 1月, 2011 5 次提交
    • N
      fs: dcache per-inode inode alias locking · 873feea0
      由 Nick Piggin 提交于 
      dcache_inode_lock can be replaced with per-inode locking. Use existing
inode->i_lock for this. This is slightly non-trivial because we sometimes
need to find the inode from the dentry, which requires d_inode to be
stabilised (either with refcount or d_lock).
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      873feea0
    • N
      fs: dcache reduce branches in lookup path · fb045adb
      由 Nick Piggin 提交于 
      Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.

Patched with:

git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fb045adb
    • N
      fs: icache RCU free inodes · fa0d7e3d
      由 Nick Piggin 提交于 
      RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fa0d7e3d
    • N
      fs: dcache remove dcache_lock · b5c84bf6
      由 Nick Piggin 提交于 
      dcache_lock no longer protects anything. remove it.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b5c84bf6
    • N
      fs: scale inode alias list · b23fb0a6
      由 Nick Piggin 提交于 
      Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list
from concurrent modification. d_alias is also protected by d_lock.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b23fb0a6
  3. 28 10月, 2010 10 次提交
  5. 26 10月, 2010 1 次提交
  7. 13 9月, 2010 3 次提交
  9. 11 8月, 2010 1 次提交
  11. 10 8月, 2010 2 次提交
    • A
      convert remaining ->clear_inode() to ->evict_inode() · b57922d9
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      b57922d9
    • C
      remove inode_setattr · 1025774c
      由 Christoph Hellwig 提交于 
      Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      1025774c
  13. 03 8月, 2010 10 次提交
    • E
      fs/9p: remove sparse warning in vfs_inode · ea137533
      由 Eric Van Hensbergen 提交于 
      make v9fs_dentry_from_dir_inode static
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      ea137533
    • A
      fs/9p: Prevent parallel rename when doing fid_lookup · a534c8d1
      由 Aneesh Kumar K.V 提交于 
      During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      a534c8d1
    • A
      fs/9p: Add support user. xattr · ebf46264
      由 Aneesh Kumar K.V 提交于 
      Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      ebf46264
    • V
      fs/9p: This patch implements TLCREATE for 9p2000.L protocol. · 5643135a
      由 Venkateswararao Jujjuri (JV) 提交于 
      SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      5643135a
    • M
      9p: Implement TMKDIR · 01a622bd
      由 M. Mohan Kumar 提交于 
      Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      01a622bd
    • M
      9p: Implement TMKNOD · 4b43516a
      由 M. Mohan Kumar 提交于 
      Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      4b43516a
    • V
      9p: Define and implement TSYMLINK for 9P2000.L · 50cc42ff
      由 Venkateswararao Jujjuri (JV) 提交于 
      Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      50cc42ff
    • E
      9p: Define and implement TLINK for 9P2000.L · 09d34ee5
      由 Eric Van Hensbergen 提交于 
      This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      09d34ee5
    • S
      9p: Implement client side of setattr for 9P2000.L protocol. · 87d7845a
      由 Sripathi Kodi 提交于 
          SYNOPSIS

      size[4] Tsetattr tag[2] attr[n]

      size[4] Rsetattr tag[2]

    DESCRIPTION

      The setattr command changes some of the file status information.
      attr resembles the iattr structure used in Linux kernel. It
      specifies which status parameter is to be changed and to what
      value. It is laid out as follows:

         valid[4]
            specifies which status information is to be changed. Possible
            values are:
            ATTR_MODE       (1 << 0)
            ATTR_UID        (1 << 1)
            ATTR_GID        (1 << 2)
            ATTR_SIZE       (1 << 3)
            ATTR_ATIME      (1 << 4)
            ATTR_MTIME      (1 << 5)
            ATTR_ATIME_SET  (1 << 7)
            ATTR_MTIME_SET  (1 << 8)

            The last two bits represent whether the time information
            is being sent by the client's user space. In the absense
            of these bits the server always uses server's time.

         mode[4]
            File permission bits

         uid[4]
            Owner id of file

         gid[4]
            Group id of the file

         size[8]
            File size

         atime_sec[8]
            Time of last file access, seconds

         atime_nsec[8]
            Time of last file access, nanoseconds

         mtime_sec[8]
            Time of last file modification, seconds

         mtime_nsec[8]
            Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to
   p9_iattr_dotl structure and passes it down to the client. The
   only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
   parameters because I don't think these are needed in our case.
   The client user space can request updating just ctime by calling
   chown(fd, -1, -1). This is handled on server side without a need
   for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
   size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
   none of them does: if the request succeeds, all changes were made;
   if it fails, none were."
   I have not done anything to implement this specifically because I
   don't see a reason.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
      87d7845a
    • S
      9p: getattr client implementation for 9P2000.L protocol. · f0853122
      由 Sripathi Kodi 提交于 
              SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for
        9P2000.L. It introduces a new structure p9_stat_dotl for getting
        Linux stat information along with QID. The data layout is similar to
        stat structure in Linux user space with the following major
        differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense
        on the client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbegren <ericvh@gmail.com>
      f0853122
  15. 23 5月, 2010 4 次提交
  17. 22 5月, 2010 3 次提交
  19. 05 4月, 2010 1 次提交