Whomever said...

  "When you meet someone now who is writing a compiler or hacking a Unix
   kernel, at least you know they're not just doing it to pick up chicks."

...has obviously never met a _Linux_ kernel hacker.

Anyway, sometimes people confuse my email addresses, which is why I
really should add the proper one to CREDITS ;-).
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The last change for partport_pc did fix the common case for all PowerMacs,
but it broke the case for PCI multiport IO cards.  In fact, the config
option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed
the parport driver.  It enables the winbond and smsc probing.

Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will
take care of it.  All powerpc configs should have
CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp
boards we tested it on.

Tested on a G4/466 with a PCI card:

0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550])
        Subsystem: Timedia Technology Co Ltd Unknown device 5079
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 53
        Region 0: I/O ports at f2000800 [size=32]
        Region 2: I/O ports at f2000870 [size=8]
        Region 3: I/O ports at f2000860 [size=8]
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up warnings in drivers/isdn by using long not int for the values
where we pass void * and cast to integer types.  The code is ok (ok passing
the stuff this way isn't pretty but the code is valid).  In all the cases I
checked out the right thing happens anyway but this removes all the
warnings.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kill warning:

drivers/char/ip2/ip2main.c: In function ‘ip2_loadmain’:
drivers/char/ip2/ip2main.c:782: warning: label ‘out_class’ defined but not used

This driver's initialization (and cleanup of errors during init) is
extremely convoluted, and could stand to be transformed into the standard
unwinding-goto style of error cleanup.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NMichael H. Warfield <mhw@wittsend.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

gcc issues the following warning:

drivers/char/ipmi/ipmi_si_intf.c: In function ‘init_ipmi_si’:
drivers/char/ipmi/ipmi_si_intf.c:1729: warning: ‘data.irq’ may be used uninitialized in this function

This is indeed a bug.  data.irq is completely uninitialized in some code
paths.  Worse than that, data from a previous decode_dmi() run can easily
leak through successive calls.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While reviewing the 'may be used uninitialized' bogus gcc warnings, I
noticed that an error code assignment was only needed if an error had
actually occured.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add kernel-doc function headers in kernel/resource.c and use them in DocBook.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add kernel-doc function headers in kernel/dma.c and use it in DocBook.

Clean up kernel-doc in mca_dma.h (the colon (':') represents a
section header).
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is a non-standard heap-sort algorithm implementation because the index
of child node is wrong .  The sort function still outputs right result, but
the performance is O( n * ( log(n) + 1 ) ) , about 10% ~ 20% worse than
standard algorithm.
Signed-off-by: Nkeios <keios.cn@gmail.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Acked-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some uses of kallsyms_lookup() do not need to find out the name of a symbol
and its module's name it belongs.  This is specially true in arch specific
code, which needs to unwind the stack to show the back trace during oops
(mips is an example).  In this specific case, we just need to retreive the
function's size and the offset of the active intruction inside it.

Adds a new entry "kallsyms_lookup_size_offset()" This new entry does
exactly the same as kallsyms_lookup() but does not require any buffers to
store any names.

It returns 0 if it fails otherwise 1.
Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Permit kmalloc() to make allocations of up to 32MB if so configured.  This
may be useful under NOMMU conditions where vmalloc() can't do this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system.  They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example.  The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.

Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.

This patch:

Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.

The stat functions then returns the full 64-bit inode number where
available and where possible.  If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.

Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.

Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.

Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.

It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.

[akpm: alpha build fix]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the pid.h macros look less revolting in an 80-col window.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This seems to have been missed when unifdef went in
via Sam's tree..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The previous hp100 changeset attempted to kill warnings, but was only
tested on !CONFIG_ISA platforms.  The correct conditional compilation
setup involves tested CONFIG_ISA rather than just MODULE.

Fixes link on CONFIG_ISA platforms (i386) in current -git.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit 54dbc0c9 is causing various
people's machines to fail to map PCI resources.

Revert it in preparation for addressing the show-APICs-in-/proc/iomem
requirement in a different manner.

Cc: Aaron Durbin <adurbin@google.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Tweak trace message format
  IB/ehca: Fix device registration
  IB/ipath: Fix RDMA reads
  RDMA/cma: Optimize error handling
  RDMA/cma: Eliminate unnecessary remove_list
  RDMA/cma: Set status correctly on route resolution error
  RDMA/cma: Fix device removal race
  RDMA/cma: Fix leak of cm_ids in case of failures

Add an extra space to make things more readable.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the call to ib_register_device() later, since a device should not
be registered until it is completely read to be used.  This fixes
crashes that occur if an upper-layer driver such as IPoIB is loaded
before the ehca module.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The PSN used to generate the request following a RDMA read was
incorrect and some state booking wasn't maintained correctly.  This
patch fixes that.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>

Reorganize code relating to cma_get_net_info() and rdam_create_id() to
optimize error case handling (no need to alloc memory/etc. as part of
rdma_create_id() if input parameters are wrong).
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Eliminate remove_list by using list_del_init() instead during device
removal handling.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

On reporting a route error, also include the status for the error,
rather than indicating a status of 0 when an error has occurred.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The race is as follows:

A process : cma_process_remove() calls cma_remove_id_dev(),
	    which sets id state to CMA_DEVICE_REMOVAL and
	    calls wait_event(dev_remove).

B process : cma_req_handler() had incremented dev_remove,
	    and calls cma_acquire_ib_dev() and on failure
	    calls cma_release_remove(), which does a
	    wake_up of cma_process_remove(). Then
	    cma_req_handler() calls rdma_destroy_id();

A Process : cma_remove_id_dev() gets woken and checks the
	    state of id, and since it is still (wrongly)
	    CMA_DEVICE_REMOVAL, it calls notify_user(id)
	    and if that fails, the caller - cma_process_remove()
	    calls rdma_destroy_id(id). Two processes can
	    call rdma_destroy_id(), resulting in one
	    de-referencing kfreed id_priv.

Fix is for process B to set CMA_DESTROYING in cma_req_handler()
so that process A will return instead of doing a rdma_destroy_id().
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] improve machzwd detection
  [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()
  [WATCHDOG] s3c24XX nowayout
  [WATCHDOG] pnx4008: add cpu_relax()
  [WATCHDOG] pnx4008_wdt.c - spinlock fixes.
  [WATCHDOG] pnx4008_wdt.c - remove patch
  [WATCHDOG] pnx4008_wdt.c - nowayout patch
  [WATCHDOG] pnx4008: add watchdog support
  [WATCHDOG] i8xx_tco remove pci_find_device.
  [WATCHDOG] alim remove pci_find_device

On a machine with no machzwd, loading the module prints out..

machzwd: MachZ ZF-Logic Watchdog driver initializing.
0xffff
machzwd: Watchdog using action = RESET

- the 0xffff printk is unnecessary
- 0xffff seems to be 'hardware not present'
- fix CodingStyle. (This driver could use some more work here)
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results

The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands.
ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead.
Signed-off-by: NSamuel Tardieu <sam@rfc1149.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

If the driver is not configured for `no way out`,
then the open method should not automatically allow
the setting of allow_close to CLOSE_STATE_ALLOW.

The setting of allow_close nullifies the use of
the magic close via the write path. It means that
in the default state, the watchdog will shut-down
even if the magic close has not been issued.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Added cpu_relax as suggested by Alan Cox.
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add io spinlocks to prevent possible race
conditions between start and stop operations
that are issued from different child processes
where the master process opened /dev/watchdog.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Duh.  I screwed up editing David Howells patch in commit
3f2e05e9, and the actual declaration for
the sigset_from_compat() function went missing. My bad.

Olaf Hering saved the day and noticed that I'm a moron.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change remove code so that we first detach
the driver from userspace, then clean up the
clock and then clean up the memory we allocated.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Change nowayout to: WATCHDOG_NOWAYOUT as defined
in include/linux/watchdog.h .
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add watchdog support for Philips PNX4008 ARM board inlined.
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use refcounting for pci device obtaining.
Use PCI_DEVICE macro.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@osdl.org>

Convert pci_find_device to pci_get_device + pci_dev_put
in alim watchdog cards' drivers (refcounting).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits)
  [netdrvr] hp100: encapsulate all non-module code
  drivers/net/wireless/{airo,ipw2100}: fix error handling bugs
  [netdrvr] phy: Fix bugs in error handling
  [PATCH] spidernet: Use pci_dma_mapping_error()
  [PATCH] sky2: version 1.9
  [PATCH] sky2: fragmented receive for large MTU
  [PATCH] sky2: use netif_tx_lock instead of LLTX
  [PATCH] sky2: incremental transmit completion
  [PATCH] sky2: name irq after eth for irqbalance
  [PATCH] sky2: workarounds for some 88e806x chips
  [PATCH] sky2: use standard pci register capabilties for error register
  [PATCH] sky2: gigabit full duplex negotiation
  e100, e1000, ixgb: increment version numbers
  ixgb: convert to netdev_priv(netdev)
  ixgb: combine more rx descriptors to improve performance
  e1000: possible memory leak in e1000_set_ringparam
  e1000: Janitor: Use #defined values for literals
  e1000: don't strip vlan ID if 8021q claims it
  e1000: rework polarity, NVM, eeprom code and fixes.
  e1000: driver state fixes (race fix)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: White space cleanup
  [PATCH] JFS: return correct error when i-node allocation failed
  JFS: Remove shadow variable from fs/jfs/jfs_txnmgr.c:xtLog()