To support key repeats, keyboard needs to be setup as an autorepeating
device.
Signed-off-by: NRakesh Iyer <riyer@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Make sure we are passing the same cookie in all calls to
request_any_context_irq() and free_irq().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.

Make the dmi callback function return 1 then dmi_check_system
will return immediately if we have a successful match.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This reduces amount #ifdeds in the code.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch enables fetching configuration data, which is normally provided
via platform_data, from the device-tree instead.

If the device is configured from device-tree data, the platform_data struct
is not used, and button data needs to be allocated dynamically. Big part of
this patch deals with confining pdata usage to the probe function, to make
this possible.
Signed-off-by: NDavid Jander <david@protonic.nl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The "#if" above should really be an "#ifdef" to avoid this warning:

  CC      drivers/input/keyboard/sh_keysc.o
drivers/input/keyboard/sh_keysc.c:294:5: warning: "CONFIG_PM_SLEEP" is
not defined
Reported-by: NMagnus Damm <magnus.damm@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Quick Charge bit in Electrode conf register should be set in init
function. This bit was missed in chip's document, which may cause touch
controller charge too slow to generate an interrupt.

Also, adjust the default vlaue of touch and release threshold
to make touch key more sensitive, this fix touch may not sensitive
after setup with plastic case.
Signed-off-by: NJiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Initialize gpio_keys driver at late_initcall level, to give it a chance to
work with GPIO expanders that might not be ready yet if we initialize the
driver at module_init time.

This is strictly a band-aid until there is a better way to specify
inter-device dependencies.
Signed-off-by: NDavid Jander <david@protonic.nl>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Remove the space between "platform:" prefix and the driver name.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/input/.
This patch removes them.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use a threaded interrupt handler in order to permit the handler to use
a GPIO driver that causes things like I2C transactions being done inside
the handler context.
Signed-off-by: NDavid Jander <david@protonic.nl>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

According to the data sheet the interrupt should be level rather than
edge triggered.  This fixes the issue of the Nokia N810 keypad stopping
responding if multiple key events occur in quick succession.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There's no need for that workqueue anymore. Get rid of it and move to
threaded IRQs instead.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Tested-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

A few new i2c-drivers came into the kernel which clear the clientdata
pointer on exit or error. This is not required anymore since the core
will do it for us.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys.
Bump up MAXKEYS to 64 too.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Otherwise the updated evdev driver (commit cdda911c,
"Input: evdev - only signal polls on full packets") no longer works on
top of omap-keypad.

Tested on Amstrad Delta.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add Qualcomm PMIC8XXX based keypad controller driver
supporting upto 18x8 matrix configuration.
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NTrilok Soni <tsoni@codeaurora.org>
Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Atarimouse fails to load as a module (with ENODEV), due to a brown paper
bag bug, misinterpreting the semantics of atari_keyb_init().

[geert] Propagate the return value of atari_keyb_init() everywhere
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

From http://www.analog.com/ADP5589:
The ADP5589 is an I/O port expander and keypad matrix decoder designed
for QWERTY type phones that require a large keypad matrix and expanded
I/O lines.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds basic support for Freescale MPR121 capacitive touch
sensor.  It's an i2c controller with up to 12 capacitance sensing inputs.

Product information (data sheet, application notes) can be found here:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121Signed-off-by: NZhang Jiejing <jiejing.zhang@freescale.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Tegra hardware design cannot reliably support an arbitrary set of keys
waking up the system. Modify wakeup logic so either any key wakes the
system up or none will do.
Signed-off-by: NRakesh Iyer <riyer@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This variable is not used outside of the module so we should mark it
as static.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Update the KEYSC driver to make use of threaded IRQs with IRQF_ONESHOT
to improve interrupt latency. The driver is using udelay() in the ISR
to make sure the hardware has stabilized. Without using interrupt threads
this delay may affect the latency of the rest of the system.

Also pass dev_name() as string for /proc/interrupts.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Convert the KEYSC driver from MSTP bit control through a magic clock
string to making use of Runtime PM.

Also, update the system suspend/resume callbacks to drop the Runtime
PM reference in the case of wakeup disabled.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add ghost key filtering support for the Nvidia Tegra matrix keyboard.
Signed-off-by: NRakesh Iyer <riyer@nvidia.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In current implementation, free_irq() was using NULL rather than the
driver data as the data pointer so free_irq() wouldn't have matched.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Adding the necessary MODULE_DEVICE_TABLE() information allows the
driver to be automatically loaded by udev
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch allows to set a device name which helps distinguishing several
gpio-keys devices.
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

With this patch you can setup a group of GPIOs representing a specific
position on an EV_ABS axis.
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We should first check whether platform data is NULL or not, before
dereferencing it to get the keymap.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NShubhrajyoti D <a0393217@india.ti.com>
Acked-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

We should return IRQ_NONE from interrupt handler in case keyboard
does not report DATA_AVAIL condition.
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Scripted with coccinelle.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Also rearrange driver structure initializer a bit.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake()
in the suspend/resume hooks.

This makes it possible to wake up from suspend-to-ram using a tca6416 key
on the sh7372 mackerel board.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The AT42QT1070 QTouch sensor supports up to 7 keys.

The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it
 should work fine on other platforms.
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The MCS50XX series has a HW bug that requires explicit chip power down.
If chip is not powered down before shutting the system down the control
pins (powerup, interrupt) are pulled up and residue current continues
flowing into the chips making them continue consuming power.
Signed-off-by: NHeungjun Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>