- 24 10月, 2007 40 次提交
-
-
由 Gerrit Renker 提交于
Assigning initial values of `0' is redundant when loading a new CCID structure, since in net/dccp/ccid.c the entire CCID structure is zeroed out prior to initialisation in ccid_new(): struct ccid { struct ccid_operations *ccid_ops; char ccid_priv[0]; }; // ... if (rx) { memset(ccid + 1, 0, ccid_ops->ccid_hc_rx_obj_size); if (ccid->ccid_ops->ccid_hc_rx_init != NULL && ccid->ccid_ops->ccid_hc_rx_init(ccid, sk) != 0) goto out_free_ccid; } else { memset(ccid + 1, 0, ccid_ops->ccid_hc_tx_obj_size); /* analogous to the rx case */ } This patch therefore removes the redundant assignments. Thanks to Arnaldo for the inspiration. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Gerrit Renker 提交于
This fixes `unaligned (read) access' errors of the type Kernel unaligned access at TPC[100f970c] dccp_parse_options+0x4f4/0x7e0 [dccp] Kernel unaligned access at TPC[1011f2e4] ccid3_hc_tx_parse_options+0x1ac/0x380 [dccp_ccid3] Kernel unaligned access at TPC[100f9898] dccp_parse_options+0x680/0x880 [dccp] by using the get_unaligned macro for parsing options. Commiter note: Preserved the sparse __be{16,32} annotations. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Gerrit Renker 提交于
This adds support for converting the 11 currently defined Reset codes into system error numbers, which are stored in sk_err for further interpretation. This makes the externally visible API behaviour similar to TCP, since a client connecting to a non-existing port will experience ECONNREFUSED. * Code 0, Unspecified, is interpreted as non-error (0); * Code 1, Closed (normal termination), also maps into 0; * Code 2, Aborted, maps into "Connection reset by peer" (ECONNRESET); * Code 3, No Connection and Code 7, Connection Refused, map into "Connection refused" (ECONNREFUSED); * Code 4, Packet Error, maps into "No message of desired type" (ENOMSG); * Code 5, Option Error, maps into "Illegal byte sequence" (EILSEQ); * Code 6, Mandatory Error, maps into "Operation not supported on transport endpoint" (EOPNOTSUPP); * Code 8, Bad Service Code, maps into "Invalid request code" (EBADRQC); * Code 9, Too Busy, maps into "Too many users" (EUSERS); * Code 10, Bad Init Cookie, maps into "Invalid request descriptor" (EBADR); * Code 11, Aggression Penalty, maps into "Quota exceeded" (EDQUOT) which makes sense in terms of using more than the `fair share' of bandwidth. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Gerrit Renker 提交于
This fixes the following problem: client connects to peer which has no DCCP enabled or loaded; ICMP error messages ("Protocol Unavailable") can be seen on the wire, but the application hangs. Reason: ICMP packets don't get through to dccp_v4_err. When reporting errors, a sequence number check is made for the DCCP packet that had caused an ICMP error to arrive. Such checks can not be made if the socket is in state LISTEN, RESPOND (which in the implementation is the same as LISTEN), or REQUEST, since update_gsr() has not been called in these states, hence the sequence window is 0..0. This patch fixes the problem by adding the REQUEST state as another exemption to the window check. The error reporting now works as expected on connecting. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This fixes a problem when analysing erroneous packets in dccp_v{4,6}_err: * dccp_hdr_seq currently takes an skb * however, the transport headers in the skb are shifted, due to the preceding IPv4/v6 header. Fixed for v4 and v6 by changing dccp_hdr_seq to take a struct dccp_hdr as argument. Verified that the correct sequence number is now reported in the error handler. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Pavel Emelyanov 提交于
In case the "multiple tables" config option is y, the ip_fib_local_table is not a variable, but a macro, that calls fib_get_table(RT_TABLE_LOCAL). Some code uses this "variable" *3* times in one place, thus implicitly making 3 calls. Fix it. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Instead of ugly extern not-existing function. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Inconsistent prototype and real type for functions may have worse consequences, than those for variables, so move them into a header. Since they are used privately in net/core, make this file reside in the same place. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Some are already declared in include/linux/netdevice.h, while some others (xfrm ones) need to be declared. The driver/net/rrunner.c just uses same extern as well, so cleanup it also. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chuck Lever 提交于
The tcp_minshall_update() function is called in exactly one place, and is passed an unsigned integer for the mss_len argument. Make the sign of the argument match the sign of the passed variable in order to eliminate an unneeded implicit type cast and a mixed sign comparison in tcp_minshall_update(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chuck Lever 提交于
In some places, the result of skb_headroom() is compared to an unsigned integer, and in others, the result is compared to a signed integer. Make the comparisons consistent and correct. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Fix one more user of netiff_subqueue_stopped. To check for the queue id one must use the __netiff_subqueue_stoped call. This run out of my sight when I made the: 668f895a [NET]: Hide the queue_mapping field inside netif_subqueue_stopped commit :( Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teras 提交于
When GRE tunnel is in NBMA mode, this patch allows an application to use a PF_PACKET socket to: - send a packet to specific NBMA address with sendto() - use recvfrom() to receive packet and check which NBMA address it came from This is required to implement properly NHRP over GRE tunnel. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Both are equal, except for the list to be traversed. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Revert to original netlink behavior. Do not reply with ACK if the netlink dump has bees successfully started. libnl has been broken by the cd40b7d3 The following command reproduce the problem: /nl-route-get 192.168.1.1 Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Ben stepped down from VLAN maintainership due to a lack of time, add myself as new maintainer. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Just like UDP. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NLeandro Melo de Sales <leandroal@gmail.com> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
The patch is big. Really big. You just won't believe how vastly hugely mindbogglingly big it is. I mean you may think it's a long way down the road to the chemist, but that's just peanuts to how big the patch from 2.6.23 is. But it's all good. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Add a port type definition for the Freescale UART driver ports (mcf.c). Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove old definitions of the timer function pointers. Add definitions of the common hardware timer functions. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Create definition for DMA channels on the ColdFire 532x family. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Add platform support structure for use with new ColdFire UART driver. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Mark the m68knommu memory init functions as __init. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Mark the m68knommu setup_arch() function as __init. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Clean up 68EZ328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Clean up 68360 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Use common function naming for 68328 timer functions. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Use common function naming for 68328 timer functions to make them consistent with the various other hardware m68knommu timers. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Clean up 68328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove unused variables from setup.c code. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate drivers/char/riscom8: clean up irq handling isdn/sc: irq handler clean isdn/act2000: fix major bug. clean irq handler. char/pcmcia/synclink_cs: trim trailing whitespace drivers/char/ip2: separate polling and irq-driven work entry points drivers/char/ip2: split out irq core logic into separate function [NETDRVR] lib82596, netxen: delete pointless tests from irq handler Eliminate pointless casts from void* in a few driver irq handlers. [PARPORT] Remove unused 'irq' argument from parport irq functions [PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt} [PARPORT] Consolidate code copies into a single generic irq handler
-
由 Linus Torvalds 提交于
* 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ni5010: kill unused variable eexpress: fix !SMP unused-var warning cgroup: kill unused variable
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits) Remove Andrew Morton from list of net driver maintainers. bonding: Acquire correct locks in alb for promisc change bonding: Convert more locks to _bh, acquire rtnl, for new locking bonding: Convert locks to _bh, rework alb locking for new locking bonding: Convert miimon to new locking bonding: Convert balance-rr transmit to new locking Convert bonding timers to workqueues Update MAINTAINERS to reflect my (jgarzik's) current efforts. pasemi_mac: fix typo defxx.c: dfx_bus_init() is __devexit not __devinit s390 MAINTAINERS remove header_ops bug in qeth driver sky2: crash on remove MIPSnet: Delete all the useless debugging printks. AR7 ethernet: small post-merge cleanups and fixes mv643xx_eth: Hook up mv643xx_get_sset_count mv643xx_eth: Remove obsolete checksum offload comment mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c mv643xx_eth: Remove unused register defines mv643xx_eth: Clean up mv643xx_eth.h ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: jmicron: update quirk for JMB361/3/5/6 libata: add HTS542525K9SA00 to NCQ blacklist libata-core: auditting chk_status v check_status [libata] checkpatch-inspired cleanups
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the quirk. This has the following effects and is recommended by the vendor. * Force enable of IDE channels (used to be left alone as BIOS configured) * Change initial phase behavior of PIO cycle such that the host pulls down the bus instead of tristating it. Vendor recommends this setting. The above settings are better for the current generation of controllers and needed for the upcoming next generation. Tested on JMB363. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-