The conf and of_id variables are assigned but never used, so they may as
well just be removed.
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Acked-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This flag is a NOOP since 2.6.35 and can be removed.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
[olof: Fixed compilation failure for pcm990-baseboard]
Signed-off-by: NOlof Johansson <olof@lixom.net>

We have a handy macro to replace open coded __cpuc_flush_dcache_area(()
and outer_clean_range() sequences. Let's use it. No functional change.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This removes the "depends on SOC_SAM_V7" statement
in a Kconfig section that's under an "if SOC_SAM_V7"
condition (same parameter).
Signed-off-by: NYanis Moreno <yanis.moreno63@gmail.com>
Reviewed-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

From Nicolas Ferre:
AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
- core CCF and drivers for most of the clocks
- use of CCF for sama5d3 (100% DT-based)

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits)
  ARM: at91/dt: remove old clk material
  ARM: at91: move sama5d3 SoC to common clk
  ARM: at91/dt: define sama5d3xek's main clk frequency
  ARM: at91/dt: define sama5d3 clocks
  ARM: at91: prepare common clk transition for sama5d3 SoC
  ARM: at91: prepare sama5 dt boards transition to common clk
  ARM: at91: add new compatible strings for pmc driver
  ARM: at91: move pit timer to common clk framework
  dt: binding: add at91 clks dt bindings documentation
  clk: at91: add PMC smd clock
  clk: at91: add PMC usb clock
  clk: at91: add PMC utmi clock
  clk: at91: add PMC programmable clocks
  clk: at91: add PMC peripheral clocks
  clk: at91: add PMC system clocks
  clk: at91: add PMC master clock
  clk: at91: add PMC pll clocks
  clk: at91: add PMC main clock
  clk: at91: add PMC macro file for dt definitions
  clk: at91: add PMC base support
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merging in post-rc1 fixes that have gone into rc2/3 to avoid later conflicts.

* commit 'fixes': (39 commits)
  arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk
  arm: socfpga: Enable ARM_TWD for socfpga
  ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16
  ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support
  ARM: multi_v7_defconfig: enable network for BeagleBone Black
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

From Jason Cooper:
mvebu soc changes for v3.14

 - orion:
    - remove IRQF_DISABLED
    - directly include some .h files

 - mvebu:
    - remove some sparse warnings

 - orion5x:
    - include cleanup
    - warning removal for C=1

 - kirkwood:
    - remove legacy clock workarounds
    - stop rpinting a TCLK value of 0 for DT boards

 - dove:
    - warning removal for C=1

* tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: fix some sparse warnings
  ARM: kirkwood: stop printk TCLK value at boot for DT boards
  ARM: orion5x: drop unused include from common.c
  ARM: Dove: Fix compiler warnings with C=1 builds
  ARM: Orion5x: Fix warnings when using C=1.
  ARM: Orion: Add missing includes
  ARM: kirkwood: remove lagacy clk workarounds
  arm: plat-orion: remove deprecated IRQF_DISABLED
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:

Renesas ARM based SoC cleanups for v3.14

* Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790,
  sh7372 and sh73a0 SoCs.
* Tidy up camera-rcar header for r8a7779 SoC
* Tidy up registration of VIN on r8a7779 SoC
* Tidy up PFC registration on r8a7790 SoC
* Correct typo in clocks for r8a7790 SoC
* Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC
* Don't use named resources for MMCIF and SDHI on ape6evm board
* Don't use named resources for MMCIF on lager board
* Tidy up device registration on lager board
* Tidy up headers for bockw board

* tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh7372: tidyup clock table order
  ARM: shmobile: r7s72100: tidyup clock table order
  ARM: shmobile: sh73a0: tidyup clock table order
  ARM: shmobile: r8a7779: cleanup registration of sh_eth
  ARM: shmobile: r8a7790: Correct typo in clocks
  ARM: shmobile: r8a7779: camera-rcar header cleanup
  ARM: shmobile: Add r8a7790_register_pfc() function
  ARM: shmobile: Cosmetic update of Lager DT Reference
  ARM: shmobile: r8a7779: cleanup registration of VIN
  ARM: shmobile: bockw: header cleanup
  ARM: shmobile: sh73a0: don't use named resource for IPMMU
  ARM: shmobile: sh73a0: don't use named resource for I2C
  ARM: shmobile: sh73a0: don't use named resource for TMU
  ARM: shmobile: lager: don't use named resource for MMCIF
  ARM: shmobile: ape6evm: don't use named resource for SDHI
  ARM: shmobile: ape6evm: don't use named resource for MMCIF
Signed-off-by: NOlof Johansson <olof@lixom.net>

Some of the clocks that were designated gate-clk do not have a gate, so
change those clocks to be of periph-clk type.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Update Kconfig to enable TWD.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable MMC/SD on the Broadcom mobile platforms, and increase the block
minors from the default 8 to 16 (since the Broadcom board by default
has root on the 8th partition).
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org # v3.12

This enables a few more options on the sunxi defconfigs such that I can
use nfsroot to boot them (there is no local storage support yet). It
also enables PRINTK_TIME and tmpfs since it's a common distro requirement.
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Few more legacy booting vs device tree booting fixes that people
have noticed while booting things with device tree for things like
omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it
for the legacy booting vs device tree fixes for this -rc cycle.

* tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

BeagleBone Black uses the TI CPSW ethernet controller, enable it in the
multi_v7_defconfig for testing coverage purposes.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v3.12

From Nicolas Ferre:
AT91: second round of fixes for 3.13
- reduce IP frequency for I2C on sama5d3
- missing aliases directive for USART3 on 9x5 family
- a PM symbol is missing if !CONFIG_PM

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency

From Jason Cooper, mvebu DT fixes for v3.13:
 - mvebu
    - PCIe fixes now that we have test devices with more ports.
    - fix access to coherency registers

* tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: re-enable PCIe on Armada 370 DB
  ARM: mvebu: use the virtual CPU registers to access coherency registers
  ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
  ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Some omap related fixes that have come up with people moving to device
tree only based booting for omap2+.

The series contains a handful of fixes for the igep boards as they were
one of the first omap3 boards to jump over completely to device tree
based booting. So these can be considered regressions compared to
booting igep in legacy mode with board files in v3.12.

Also included are few other device tree vs legacy booting regressions:

- yet more missing omap3 .dtsi entries that have showed up booting
  various boards with device tree only

- n900 eMMC device tree fix

- fixes for beagle USB EHCI

- two fixes to make omap2420 MMC work

As we're moving omap2+ to be device tree only for v3.14, I'd like to
have v3.13 work equally well for legacy based booting and device tree
based booting. So there will be likely few more device tree related
booting patches trickling in.

This series also includes a regression fix for the omap timer posted
mode that may wrongly stay on from the bootloader for some SoCs.

* tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
  ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
  ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
  ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
  ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
  ARM: dts: omap3-igep: Fix bus-width for mmc1
  ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
  ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
  ARM: OMAP2+: Fix eMMC on n900 with device tree
  ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
  ARM: OMAP2+: Fix more missing data for omap3.dtsi file
Signed-off-by: NOlof Johansson <olof@lixom.net>

drivers/net/ethernet/smsc/smsc911x.c is expecting supplies named
"vdd33a" and "vddvario". Currently the shared DTS file provides
"vmmc" and "vmmc_aux", and the supply lookup will fail:

smsc911x 2c000000.ethernet: Looking up vdd33a-supply from device tree
smsc911x 2c000000.ethernet: Looking up vdd33a-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed
smsc911x 2c000000.ethernet: Looking up vddvario-supply from device tree
smsc911x 2c000000.ethernet: Looking up vddvario-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed

Fix it!

Looks like commmit 6b2978ac (ARM: dts: Shared file for omap GPMC
connected smsc911x) made the problem more visible by moving the smc911x
configuration from the omap3-igep0020.dts file to the generic file.
But it seems we've had this problem since commit d72b4415
(ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support).

Tested on OMAP3 Overo platform.
Signed-off-by: NFlorian Vaussard <florian.vaussard@epfl.ch>
[tony@atomide.com: updated comments for the commits causing the problem]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 'cd8abed1' "ARM: OMAP2+: Powerdomain: Remove the need to
always have a voltdm associated to a pwrdm" leads to the following
Smatch complaint:

arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register()
	 error: we previously assumed 'arch_pwrdm' could be null (see line 105)

So, fix the unchecked dereference of arch_pwrdm.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This adds typical McBSP2-TWL4030 audio description to the legacy
Beagle Board.
Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and
Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes WLAN on omap4-sdp that got broken in v3.10 when we
moved omap4 to boot using device tree only as I did not have
the WL12XX card in my omap4 SDP to test with. The commit that
attempted to make WL12XX working on omap4 SDP was 775d2418
(ARM: dts: Fix muxing and regulator for wl12xx on the SDIO
bus for blaze).
Signed-off-by: NBalaji T K <balajitk@ti.com>
[tony@atomide.com: updated comments for the regression]
Signed-off-by: NTony Lindgren <tony@atomide.com>

pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.

Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x

SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes a regression where WLAN did not work after a warm reset
or after one up/down cycle that happened when we move omap4 to boot
using device tree only. For reference, the kernel bug is described at:

https://bugzilla.kernel.org/show_bug.cgi?id=63821

Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: NBalaji T K <balajitk@ti.com>
[tony@atomide.com: update comments to describe the regression]
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch removes the old main clk node which is now useless as sama5d3
SoCs and boards are no longer compatible with the old at91 clk
implementations.

It also remove old clock definitions (clock definitions using at91 old clk
framework).
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting sama5d3
SoC support. This will enable automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define the main clock frequency for the new main clock node
in sama5d3xcm.dtsi.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define sama5d3 clocks in sama5d3 device tree.
Add references to the appropriate clocks in each peripheral.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sama5d3 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch prepare the transition to common clk for sama5 dt boards by
replacing the timer init callback.

Clocks registration cannot be done in early init callback (as formerly done
by the old clk implementation) because it requires dynamic allocation
which is not ready yet during early init.

In the other hand, at91 clocks must be registered before
at91sam926x_pit_init is called because PIT (Periodic Interval Timer) driver
request the master clk (mck).

A new function (at91sama5_dt_timer_init) is created to fullfil these needs.
This function registers all at91 clks using the dt definition before
calling the PIT init function.
The device tree clock registration is enabled only if common clk is
selected. Else the old clk registration is been done during
at91_dt_initialize call.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new compatible string for PMC node to prepare the
transition to common clk.

These compatible string come from pmc driver in clk subsystem and are
needed to provide new device tree compatibility with old at91 clks
(device tree using common clks will use the new compatible strings).
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use device tree to get the source clock of the PIT (Periodic Interval Timer).
If the clock is not found in device tree (or dt is not enabled) we'll try to
get it using clk_lookup definitions.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 clks dt bindings documentation.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds at91 smd (Soft Modem) clock implementation using common clk
framework.

Not used by any driver right now.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 usb clock implementation using common clk framework.
This clock is used to clock usb ports (ohci, ehci and udc).
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This adds new at91 utmi clock implementation using common clk framework.

This clock is a pll with a fixed factor (x40).
It is used as a source for usb clock.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 programmable clocks implementation using common clk
framework.
A programmable clock is a clock which can be exported on a given pin to clock
external devices.
Each programmable clock is given an id (from 0 to 8).
The number of available programmable clocks depends on the SoC you're using.
Programmable clock driver only implements the clock setting (clock rate and
parent setting). It must be chained to a system clock in order to
enable/disable the generated clock.
The PCKX pins used to output the clock signals must be assigned to the
appropriate peripheral (see atmel's datasheets).
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 peripheral clock implementation using common clk
framework.

Almost all peripherals provided by at91 SoCs need a clock to work properly.
This clock is enabled/disabled using PCER/PCDR resgisters.

Each peripheral is given an id (see atmel's datasheets) which is used to
define and reference peripheral clocks.

Some new SoCs (at91sam9x5 and sama5d3) provide a new register (PCR) where you
can configure the peripheral clock as a division of the master clock.
This will help reducing the peripherals power comsumption.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 system clock implementation using common clk
framework.

Some peripherals need to enable a "system" clock in order to work properly.
Each system clock is given an id based on the bit position in SCER/SCDR
registers.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 master clock implementation using common clk
framework.

The master clock layout describe the MCKR register layout.
There are 2 master clock layouts:
- at91rm9200
- at91sam9x5

Master clocks are given characteristics:
- min/max clock output rate

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 pll clock implementation using common clk framework.

The pll clock layout describe the PLLX register layout.
There are four pll clock layouts:
- at91rm9200
- at91sam9g20
- at91sam9g45
- sama5d3

PLL clocks are given characteristics:
- min/max clock source rate
- ranges of valid clock output rates
- values to set in out and icpll fields for each supported output range

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds new at91 main oscillator clock implementation using common
clk framework.

If rate is not provided during clock registration it is calculated using
the slow clock (main clk parent in this case) rate and MCFR register.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>