Now that saa7164 uses v4l2_fh and that poll() has been fixed, it is
trivial to add support for control events.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

- poll doesn't return negative values, so you can't return -EINVAL.
  Instead return POLLERR.
- poll can't be called if !video_is_registered(), so this test can
  be dropped.
- poll can never do a blocking wait, so remove that check.
- poll shouldn't attempt to start streaming if the caller isn't interested
  in read events.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Control events require the use of struct v4l2_fh. Add this to saa7164.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert this driver to the control framework. Note that the VBI device
nodes have no controls as there is nothing to control.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The next patches on the series need this modifications to pass clean
checkpath.pl.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Referenced file has moved
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for 10 and 12 bit Bayer formats to the test pattern generator
and the vivid driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the missing support for v4l2_sdr_format (V4L2_BUF_TYPE_SDR_CAPTURE).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the following 'make htmldocs' warnings:

  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'frame_height'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'hfreq'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'vsync'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'active_width'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'polarities'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'interlaced'
  .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'fmt'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'frame_height'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'hfreq'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'vsync'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'polarities'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'interlaced'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'aspect'
  .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'fmt'
  .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'hor_landscape'
  .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'vert_portrait'
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use a type-safe assignment instead of memcpy. And it is easier to read as well.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Document this new transfer function used by High Dynamic Range content.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Support the new SMPTE 2084 transfer function in the vivid test driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Support the new SMPTE 2084 transfer function in the test pattern generator.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

CEA-861.3 adds support for the SMPTE 2084 Electro-Optical Transfer Function
as can be used in HDR displays. Add a define for this in videodev2.h.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Support this new colorspace in vivid.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support to the test pattern generator for the DCI-P3 colorspace.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Document this colorspace.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This colorspace is used for cinema projectors and is supported by
the DisplayPort standard.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The V4L2_COLORSPACE_470_SYSTEM_M (aka NTSC 1953) colorspace has a different
whitepoint (C) compared to Rec. 709 (D65). The Bradford method is the
recommended method to compensate for that when converting a Rec. 709 color
to an NTSC 1953 color.

See http://www.brucelindbloom.com/index.html?Eqn_ChromAdapt.html for more
details on the Bradford method.

This patch updates the Rec. 709 to NTSC 1953 matrix so that it includes the
chromatic adaptation as calculated by the Bradford method, and it recalculates
the tpg_csc_colors table accordingly.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The max value of various menu controls is hardcoded, and it is easy to forget
to update it after adding a new menu item.

So use ARRAY_SIZE instead to calculate this value.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Every time compat32 encounters an unknown ioctl it will call pr_warn.
However, that's very irritating since it is perfectly normal that this
happens. For example, applications often try to call an ioctl to see if
it exists, and if that's used with an older kernel where compat32 doesn't
support that ioctl yet, then it starts spamming the kernel log.

So replace pr_warn by pr_debug.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch will get the DT parameters of vsync/hsync/pixclock polarity, and
pass to driver.

Also add a debug information for test purpose.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The emb_crc_sync, mck_hz, asd and asd_sizes platform data fields are
unused, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

All in-tree users have migrated to DT, remove support for platform data.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[josh.wu@atmel.com: squash the commit to remove the unused variable: dev]
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Put the endpoint DT node earlier to avoid the need for goto statements
to a cleanup code block in case of errors.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

After adding the format check in try_fmt()/set_fmt(), we don't need any
format check in configure_geometry(). So make configure_geometry() as
void type.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As in set_fmt() function we only need to know which format is been set,
we don't need to access the ISI hardware in this moment.

So move the configure_geometry(), which access the ISI hardware, to
start_streaming() will make code more consistent and simpler.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In the function configure_geometry(), we will setup the ISI CFG2
according to the sensor output format.

It make no sense to just read back the CFG2 register and just set part
of it.

So just set up this register directly makes things simpler.
Currently only support YUV format from camera sensor.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If ISI is working on a 1024x768 or higher resolution, it needs longer
time to disable ISI. So this patch will increase timeout to 500ms.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If CONFIG_PM=n:

    drivers/media/platform/soc_camera/atmel-isi.c:1044: warning: 'atmel_isi_runtime_suspend' defined but not used
    drivers/media/platform/soc_camera/atmel-isi.c:1054: warning: 'atmel_isi_runtime_resume' defined but not used

Protect the unused functions by #ifdef CONFIG_PM to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Hans Verkuil says: "The only place querystd can be called  is in the QUERYSTD
ioctl, all other ioctls should use the last set standard." So call the g_std()
subdevice method instead of querystd() in the driver's set_fmt() method.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

rcar_vin_set_fmt() defaults to  PAL when the subdevice's querystd() method call
fails (e.g. due to I2C error).  This doesn't work very well when a camera being
used  outputs NTSC which has different order of fields and resolution.  Let  us
stop  pretending and return the actual error except  when the querystd() method
is not implemented,  in which case  we'll have  to set the 'field' variable  to
V4L2_FIELD_NONE.

Note that doing this would prevent video capture on at least Renesas Henninger/
Porter boards where I2C seems particularly buggy.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since in soc_of_bind() it may use the of node's full name as the clk_name,
and this full name may be longer than 32 characters, take at91 i2c sensor
as an example, length is 34 bytes:
   /ahb/apb/i2c@f8028000/camera@0x30

So this patch increase the clk_name[] array size to 64. It seems big
enough so far.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The hardware timestamping implementation has been reported as not
working correctly on at least the Logitech C920. Until this can be
fixed, disable it by default.
Reported-by: NPeter Rabbitson <rabbit@rabbit.us>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

* Constify struct

* Fix comments

* Fix alignment

* Use modulus to transfer phase angles

* Correct float [-1.0, +1.0] to s8 [-128, 127] conversion
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add user control to adjust generated FM deviation.
Default it to 75kHz like public FM radio broadcast.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match
compatible ioctls on ARM64 kernels without breaking AMD64 some fields
should be aligned using compat_s64 type and in one case struct should be
unpacked.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: <stable@vger.kernel.org>      # for v3.10 and up
[hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add Leadtek Winfast TV2100 FM card to saa7134 driver. It is a card bearing
SAA7130HL chip.
Signed-off-by: NDarek Zielski <dz1125tor@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

printk() supports %*ph format specifier for printing a small buffers,
let's use it intead of %02x %02x...
Signed-off-by: NAlexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>