[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]

If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.
Signed-off-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6aecee6ad41cf97c0270f72da032c10eef025bf0 ]

The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot.  This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).

With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.
Signed-off-by: NStuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]

We observe an oops in the skx_edac module during boot:

  EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
  EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  ...
  EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
  Too many memory controllers: 16
  EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0

We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).

[ bp: This is just a band-aid fix until we've sorted out the whole issue
  with the bus_type association and handling in EDAC and can get rid of
  this arbitrary limit. ]
Signed-off-by: NJustin Ernst <justin.ernst@hpe.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRuss Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46bdf777685677c1cc6b3da9220aace9da690731 ]

The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:

drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'

The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.

This adds the same dependency that mlx5 uses to the other two.

Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4a1728cad6340bfbe17bd17fd158b2165cd99508 ]

Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f4474aa6e5e901ee4af21f39f1b9115aaaaec503 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr -p 1 /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr -p /mnt/f2fs/file

    0 -----------------N- /mnt/f2fs/file

But actually, we expect the correct result is:

    1 -----------------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_projid field during mount,
fix it.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a4daae5ffea39f5015334e4d18a6a80b447cae4 ]

This is related to
ee70daab ("xfs: update i_size after unwritten conversion in dio completion")

If we update i_size during dio_write, dio_read can read out stale data, which
breaks xfstests/465.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bfcb79fca19d267712e425af1dd48812c40dec0c ]

If an Endpoint reported an error with ERR_FATAL, we previously ran driver
error recovery callbacks only for the Endpoint's driver.  But if we reset a
Link to recover from the error, all downstream components are affected,
including the Endpoint, any multi-function peers, and children of those
peers.

Initiate the Link reset from the deepest Downstream Port that is
reliable, and call the error recovery callbacks for all its children.

If a Downstream Port (including a Root Port) reports an error, we assume
the Port itself is reliable and we need to reset its downstream Link.  In
all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume
the Link leading to the component needs to be reset, so we initiate the
reset at the parent Downstream Port.

This allows two other clean-ups.  First, we currently only use a Link
reset, which can only be initiated using a Downstream Port, so we can
remove checks for Endpoints.  Second, the Downstream Port where we initiate
the Link reset is reliable (unlike components downstream from it), so the
special cases for error detect and resume are no longer necessary.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a715156656bddf4aa92d9868f850aeeb0465fd0 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Tested-by: NNicolas Chauvet <kwizart@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 503fcd8464fb6cd18073e97dec59b933930655d6 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b38f6aa4b60a1fcc41f5c469981f8f62d6070ee3 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8188391c127ea34d66f37eda6755d0acb51dc600 ]

Commit 6c468f10 ("ARM: dts: tegra: add Tegra20 NAND flash
controller node") introduced the nand-controller node. However, it got
added at the wrong spot not honoring the address order. Fix this.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d9fd22447ba59a9b53a202fade977e82bfba8d8d ]

Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c5f335f61ffb838fc3cc1cec9464067663eb8c8 ]

According to Documentation/devicetree/bindings/rtc/rtc-ds1307.txt the
original compatible "maxim,ds1341" is not a valid entry.

Switch to the documented "dallas,ds1341" compatible.
Reported-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Tested-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b739c177e1aeab532f355493439a1901b85be38c ]

dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3a00dae006623d799266d85f28b5f76ef07d6b6c ]

This local variable is unused, remove it.

Fixes: dea54fba ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c6b1867b1da3b1203b4c49988afeebdcbdf65499 ]

Currently we show mount option "io_bits=%u" as "io_size=%uKB",
it will cause option parsing problem(unrecognized mount option)
in remount.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]

If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.

And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Hannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1b571086e869395b6a11ab24186b0104fe05c057 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion
from enumeration type 'enum t4_bar2_qtype' to different enumeration type
'enum cxgb4_bar2_qtype' [-Wenum-conversion]
                                                 T4_BAR2_QTYPE_EGRESS,
                                                 ^~~~~~~~~~~~~~~~~~~~

c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the
corresponding values from that type so Clang is satisfied without changing
the meaning of the code.

T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0
T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit db04264fe9bc0f2b62e036629f9afb530324b693 ]

The SR-IOV spec requires that VFs must report zero for the INTx pin
register as VFs are precluded from INTx support.  It's much easier for
the host kernel to understand whether a device is a VF and therefore
whether a non-zero pin register value is bogus than it is to do the
same in userspace.  Override the INTx count for such devices and
virtualize the pin register to provide a consistent view of the device
to the user.

As this is clearly a spec violation, warn about it to support hardware
validation, but also provide a known whitelist as it doesn't do much
good to continue complaining if the hardware vendor doesn't plan to
fix it.

Known devices with this issue: 8086:270c
Tested-by: NGage Eads <gage.eads@intel.com>
Reviewed-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]

Free allocated vdev->msi_perm in error path.
Signed-off-by: NLi Qiang <liq3ea@gmail.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 52a42c2a90226dc61c99bbd0cb096deeb52c334b ]

Avoid going from struct page to virt address (and back) by just
keeping pointer to the allocated pages instead of virt address.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]

The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]

kgdbts current fails when compiled with restrict:

drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 94fe5f2b45c4108885e4b71f6b181068632ec904 ]

Register slimbus controller only after finishing powerup sequnce so that we
do not endup in situation where core starts sending transactions before
the controller is ready.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9652e6aa62a1836494ebb8dbd402587c083b568c ]

It looks like there is a typo in probe return. Fix it.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1830dad34c070161fda2ff1db77b39ffa78aa380 ]

Move ngd platform driver out of loop so that it registers only once.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 30af4fb619e5126cb3152072e687b377fc9398d6 ]

When a replicator port is enabled, we block the traffic
on the other port and route all traffic to the new enabled
port. If there are two active trace sessions each targeting
the two different paths from the replicator, the second session
will disable the first session and route all the data to the
second path.
                    ETR
                 /
e.g, replicator
                 \
                    ETB

If CPU0 is operated in sysfs mode to ETR and CPU1 is operated
in perf mode to ETB, depending on the order in which the
replicator is enabled one device is blocked.

Ideally we need trace-id for the session to make the
right choice. That implies we need a trace-id allocation
logic for the coresight subsystem and use that to route
the traffic. The short term solution is to only manage
the "target port" and leave the other port untouched.
That leaves both the paths unaffected, except that some
unwanted traffic may be pushed to the paths (if the Trace-IDs
are not far enough), which is still fine and can be filtered
out while processing rather than silently blocking the data.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e7753f3937610633a540f2be81be87531f96ff04 ]

>From the comment in the code, it claims the requirement for byte-address
alignment for RRP register: 'for 32-bit, 64-bit and 128-bit wide trace
memory, the four LSBs must be 0s. For 256-bit wide trace memory, the
five LSBs must be 0s'.  This isn't consistent with the program, the
program sets five LSBs as zeros for 32/64/128-bit wide trace memory and
set six LSBs zeros for 256-bit wide trace memory.

After checking with the CoreSight Trace Memory Controller technical
reference manual (ARM DDI 0461B, section 3.3.4 RAM Read Pointer
Register), it proves the comment is right and the program does wrong
setting.

This patch fixes byte-address alignment for RRP by following correct
definition in the technical reference manual.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b860801e3237ec4c74cf8de0be4816996757ae5c ]

For non-VHE systems host kernel runs at EL1 and jumps to EL2 whenever
hypervisor code should be executed. In this case ETM4x driver must
restrict configuration to EL1 when it setups kernel tracing.
However, there is no separate hypervisor privilege level when VHE
is enabled, the host kernel runs at EL2.

This patch fixes configuration of TRCACATRn register for VHE systems
so that ETM_EXLEVEL_NS_HYP bit is used instead of ETM_EXLEVEL_NS_OS
to on/off kernel tracing. At the same time, it moves common code
to new helper.
Signed-off-by: NTomasz Nowicki <tnowicki@caviumnetworks.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 96a7f644006ecc05eaaa1a5d09373d0ee63beb0a ]

Since the ETR could be driven either by SYSFS or by perf, it
becomes complicated how we deal with the buffers used for each
of these modes. The ETR driver cannot simply free the current
attached buffer without knowing the provider (i.e, sysfs vs perf).

To solve this issue, we provide:
1) the driver-mode specific etr buffer to be retained in the drvdata
2) the etr_buf for a session should be passed on when enabling the
   hardware, which will be stored in drvdata->etr_buf. This will be
   replaced (not free'd) as soon as the hardware is disabled, after
   necessary sync operation.

The advantages of this are :

1) The common code path doesn't need to worry about how to dispose
   an existing buffer, if it is about to start a new session with a
   different buffer, possibly in a different mode.
2) The driver mode can control its buffers and can get access to the
   saved session even when the hardware is operating in a different
   mode. (e.g, we can still access a trace buffer from a sysfs mode
   even if the etr is now used in perf mode, without disrupting the
   current session.)

Towards this, we introduce a sysfs specific data which will hold the
etr_buf used for sysfs mode of operation, controlled solely by the
sysfs mode handling code.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4f8ef21007531c3d7cb5b826e7b2c8999b65ecae ]

We enable the trace path, before activating the source.
If we fail to enable the source, we must disable the path
to make sure it is available for another session.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5ecabe4a76e8cdb61fa3e24862d9ca240a1c4ddf ]

We create a coresight trace path for each online CPU when
we start the event. We rely on the number of online CPUs
and then go on to allocate an array matching the "number of
online CPUs" for holding the path and then uses normal
CPU id as the index to the array. This is problematic as
we could have some offline CPUs causing us to access beyond
the actual array size (e.g, on a dual SMP system, if CPU0 is
offline, CPU1 could be really accessing beyond the array).
The solution is to switch to per-cpu array for holding the path.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c71369de02b285d9da526a526d8f2affc7b17c59 ]

The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.

The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>