aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: NPrabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shmem_getpage_gfp uses an atomic operation to set the SwapBacked field
before it's even added to the LRU or visible.  This is unnecessary as what
could it possible race against?  Use an unlocked variant.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cold is a bool, make it one.  Make the likely case the "if" part of the
block instead of the else as according to the optimisation manual this is
preferred.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

X86 prefers the use of unsigned types for iterators and there is a
tendency to mix whether a signed or unsigned type if used for page order.
This converts a number of sites in mm/page_alloc.c to use unsigned int for
order where possible.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the free path we calculate page_to_pfn multiple times. Reduce that.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The test_bit operations in get/set pageblock flags are expensive.  This
patch reads the bitmap on a word basis and use shifts and masks to isolate
the bits of interest.  Similarly masks are used to set a local copy of the
bitmap and then use cmpxchg to update the bitmap if there have been no
other changes made in parallel.

In a test running dd onto tmpfs the overhead of the pageblock-related
functions went from 1.27% in profiles to 0.5%.

In addition to the performance benefits, this patch closes races that are
possible between:

a) get_ and set_pageblock_migratetype(), where get_pageblock_migratetype()
   reads part of the bits before and other part of the bits after
   set_pageblock_migratetype() has updated them.

b) set_pageblock_migratetype() and set_pageblock_skip(), where the non-atomic
   read-modify-update set bit operation in set_pageblock_skip() will cause
   lost updates to some bits changed in the set_pageblock_migratetype().

Joonsoo Kim first reported the case a) via code inspection.  Vlastimil
Babka's testing with a debug patch showed that either a) or b) occurs
roughly once per mmtests' stress-highalloc benchmark (although not
necessarily in the same pageblock).  Furthermore during development of
unrelated compaction patches, it was observed that frequent calls to
{start,undo}_isolate_page_range() the race occurs several thousands of
times and has resulted in NULL pointer dereferences in move_freepages()
and free_one_page() in places where free_list[migratetype] is
manipulated by e.g.  list_move().  Further debugging confirmed that
migratetype had invalid value of 6, causing out of bounds access to the
free_list array.

That confirmed that the race exist, although it may be extremely rare,
and currently only fatal where page isolation is performed due to
memory hot remove.  Races on pageblocks being updated by
set_pageblock_migratetype(), where both old and new migratetype are
lower MIGRATE_RESERVE, currently cannot result in an invalid value
being observed, although theoretically they may still lead to
unexpected creation or destruction of MIGRATE_RESERVE pageblocks.
Furthermore, things could get suddenly worse when memory isolation is
used more, or when new migratetypes are added.

After this patch, the race has no longer been observed in testing.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-and-tested-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If cpusets are not in use then we still check a global variable on every
page allocation.  Use jump labels to avoid the overhead.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch exposes the jump_label reference count in preparation for the
next patch.  cpusets cares about both the jump_label being enabled and how
many users of the cpusets there currently are.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current names are rather inconsistent. Let's try to improve them.

Brief change log:

** old name **                          ** new name **

kmem_cache_create_memcg                 memcg_create_kmem_cache
memcg_kmem_create_cache                 memcg_regsiter_cache
memcg_kmem_destroy_cache                memcg_unregister_cache

kmem_cache_destroy_memcg_children       memcg_cleanup_cache_params
mem_cgroup_destroy_all_caches           memcg_unregister_all_caches

create_work                             memcg_register_cache_work
memcg_create_cache_work_func            memcg_register_cache_func
memcg_create_cache_enqueue              memcg_schedule_register_cache
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Originally get_swap_page() started iterating through the singly-linked
list of swap_info_structs using swap_list.next or highest_priority_index,
which both were intended to point to the highest priority active swap
target that was not full.  The first patch in this series changed the
singly-linked list to a doubly-linked list, and removed the logic to start
at the highest priority non-full entry; it starts scanning at the highest
priority entry each time, even if the entry is full.

Replace the manually ordered swap_list_head with a plist, swap_active_head.
Add a new plist, swap_avail_head.  The original swap_active_head plist
contains all active swap_info_structs, as before, while the new
swap_avail_head plist contains only swap_info_structs that are active and
available, i.e. not full.  Add a new spinlock, swap_avail_lock, to protect
the swap_avail_head list.

Mel Gorman suggested using plists since they internally handle ordering
the list entries based on priority, which is exactly what swap was doing
manually.  All the ordering code is now removed, and swap_info_struct
entries and simply added to their corresponding plist and automatically
ordered correctly.

Using a new plist for available swap_info_structs simplifies and
optimizes get_swap_page(), which no longer has to iterate over full
swap_info_structs.  Using a new spinlock for swap_avail_head plist
allows each swap_info_struct to add or remove themselves from the
plist when they become full or not-full; previously they could not
do so because the swap_info_struct->lock is held when they change
from full<->not-full, and the swap_lock protecting the main
swap_active_head must be ordered before any swap_info_struct->lock.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Weijie Yang <weijieut@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add plist_requeue(), which moves the specified plist_node after all other
same-priority plist_nodes in the list.  This is essentially an optimized
plist_del() followed by plist_add().

This is needed by swap, which (with the next patch in this set) uses a
plist of available swap devices.  When a swap device (either a swap
partition or swap file) are added to the system with swapon(), the device
is added to a plist, ordered by the swap device's priority.  When swap
needs to allocate a page from one of the swap devices, it takes the page
from the first swap device on the plist, which is the highest priority
swap device.  The swap device is left in the plist until all its pages are
used, and then removed from the plist when it becomes full.

However, as described in man 2 swapon, swap must allocate pages from swap
devices with the same priority in round-robin order; to do this, on each
swap page allocation, swap uses a page from the first swap device in the
plist, and then calls plist_requeue() to move that swap device entry to
after any other same-priority swap devices.  The next swap page allocation
will again use a page from the first swap device in the plist and requeue
it, and so on, resulting in round-robin usage of equal-priority swap
devices.

Also add plist_test_requeue() test function, for use by plist_test() to
test plist_requeue() function.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Weijie Yang <weijieut@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bob Liu <bob.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add PLIST_HEAD() to plist.h, equivalent to LIST_HEAD() from list.h, to
define and initialize a struct plist_head.

Add plist_for_each_continue() and plist_for_each_entry_continue(),
equivalent to list_for_each_continue() and list_for_each_entry_continue(),
to iterate over a plist continuing after the current position.

Add plist_prev() and plist_next(), equivalent to (struct list_head*)->prev
and ->next, implemented by list_prev_entry() and list_next_entry(), to
access the prev/next struct plist_node entry.  These are needed because
unlike struct list_head, direct access of the prev/next struct plist_node
isn't possible; the list must be navigated via the contained struct
list_head.  e.g.  instead of accessing the prev by list_prev_entry(node,
node_list) it can be accessed by plist_prev(node).
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Weijie Yang <weijieut@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The logic controlling the singly-linked list of swap_info_struct entries
for all active, i.e.  swapon'ed, swap targets is rather complex, because:

 - it stores the entries in priority order
 - there is a pointer to the highest priority entry
 - there is a pointer to the highest priority not-full entry
 - there is a highest_priority_index variable set outside the swap_lock
 - swap entries of equal priority should be used equally

this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181
where different priority swap targets are incorrectly used equally.

That bug probably could be solved with the existing singly-linked lists,
but I think it would only add more complexity to the already difficult to
understand get_swap_page() swap_list iteration logic.

The first patch changes from a singly-linked list to a doubly-linked list
using list_heads; the highest_priority_index and related code are removed
and get_swap_page() starts each iteration at the highest priority
swap_info entry, even if it's full.  While this does introduce unnecessary
list iteration (i.e.  Schlemiel the painter's algorithm) in the case where
one or more of the highest priority entries are full, the iteration and
manipulation code is much simpler and behaves correctly re: the above bug;
and the fourth patch removes the unnecessary iteration.

The second patch adds some minor plist helper functions; nothing new
really, just functions to match existing regular list functions.  These
are used by the next two patches.

The third patch adds plist_requeue(), which is used by get_swap_page() in
the next patch - it performs the requeueing of same-priority entries
(which moves the entry to the end of its priority in the plist), so that
all equal-priority swap_info_structs get used equally.

The fourth patch converts the main list into a plist, and adds a new plist
that contains only swap_info entries that are both active and not full.
As Mel suggested using plists allows removing all the ordering code from
swap - plists handle ordering automatically.  The list naming is also
clarified now that there are two lists, with the original list changed
from swap_list_head to swap_active_head and the new list named
swap_avail_head.  A new spinlock is also added for the new list, so
swap_info entries can be added or removed from the new list immediately as
they become full or not full.

This patch (of 4):

Replace the singly-linked list tracking active, i.e.  swapon'ed,
swap_info_struct entries with a doubly-linked list using struct
list_heads.  Simplify the logic iterating and manipulating the list of
entries, especially get_swap_page(), by using standard list_head
functions, and removing the highest priority iteration logic.

The change fixes the bug:
https://lkml.org/lkml/2014/2/13/181
in which different priority swap entries after the highest priority entry
are incorrectly used equally in pairs.  The swap behavior is now as
advertised, i.e. different priority swap entries are used in order, and
equal priority swap targets are used concurrently.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Weijie Yang <weijieut@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During compaction, update_nr_listpages() has been used to count remaining
non-migrated and free pages after a call to migrage_pages().  The
freepages counting has become unneccessary, and it turns out that
migratepages counting is also unnecessary in most cases.

The only situation when it's needed to count cc->migratepages is when
migrate_pages() returns with a negative error code.  Otherwise, the
non-negative return value is the number of pages that were not migrated,
which is exactly the count of remaining pages in the cc->migratepages
list.

Furthermore, any non-zero count is only interesting for the tracepoint of
mm_compaction_migratepages events, because after that all remaining
unmigrated pages are put back and their count is set to 0.

This patch therefore removes update_nr_listpages() completely, and changes
the tracepoint definition so that the manual counting is done only when
the tracepoint is enabled, and only when migrate_pages() returns a
negative error code.

Furthermore, migrate_pages() and the tracepoints won't be called when
there's nothing to migrate.  This potentially avoids some wasted cycles
and reduces the volume of uninteresting mm_compaction_migratepages events
where "nr_migrated=0 nr_failed=0".  In the stress-highalloc mmtest, this
was about 75% of the events.  The mm_compaction_isolate_migratepages event
is better for determining that nothing was isolated for migration, and
this one was just duplicating the info.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We're going to want to manipulate the migration mode for compaction in the
page allocator, and currently compact_control's sync field is only a bool.

Currently, we only do MIGRATE_ASYNC or MIGRATE_SYNC_LIGHT compaction
depending on the value of this bool.  Convert the bool to enum
migrate_mode and pass the migration mode in directly.  Later, we'll want
to avoid MIGRATE_SYNC_LIGHT for thp allocations in the pagefault patch to
avoid unnecessary latency.

This also alters compaction triggered from sysfs, either for the entire
system or for a node, to force MIGRATE_SYNC.

[akpm@linux-foundation.org: fix build]
[iamjoonsoo.kim@lge.com: use MIGRATE_SYNC in alloc_contig_range()]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Suggested-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each zone has a cached migration scanner pfn for memory compaction so that
subsequent calls to memory compaction can start where the previous call
left off.

Currently, the compaction migration scanner only updates the per-zone
cached pfn when pageblocks were not skipped for async compaction.  This
creates a dependency on calling sync compaction to avoid having subsequent
calls to async compaction from scanning an enormous amount of non-MOVABLE
pageblocks each time it is called.  On large machines, this could be
potentially very expensive.

This patch adds a per-zone cached migration scanner pfn only for async
compaction.  It is updated everytime a pageblock has been scanned in its
entirety and when no pages from it were successfully isolated.  The cached
migration scanner pfn for sync compaction is updated only when called for
sync compaction.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory migration uses a callback defined by the caller to determine how to
allocate destination pages.  When migration fails for a source page,
however, it frees the destination page back to the system.

This patch adds a memory migration callback defined by the caller to
determine how to free destination pages.  If a caller, such as memory
compaction, builds its own freelist for migration targets, this can reuse
already freed memory instead of scanning additional memory.

If the caller provides a function to handle freeing of destination pages,
it is called when page migration fails.  If the caller passes NULL then
freeing back to the system will be handled as usual.  This patch
introduces no functional change.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of calling back to memcontrol.c from kmem_cache_create_memcg in
order to just create the name of a per memcg cache, let's allocate it in
place.  We only need to pass the memcg name to kmem_cache_create_memcg for
that - everything else can be done in slab_common.c.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With ELF extended numbering 16-bit bound is not hard limit any more.

[akpm@linux-foundation.org: fix typo]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KSM was converted to use rmap_walk() and now nobody uses these functions
outside mm/rmap.c.

Let's covert them back to static.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we are doing NUMA-aware shrinking, and can have shrinkers
running in parallel, or working on individual nodes, it seems like we
should also be sticking the node in the output.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NDave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was looking at a trace of the slab shrinkers (attachment in this comment):

	https://bugs.freedesktop.org/show_bug.cgi?id=72742#c67

and noticed that "total_scan" can go negative in some cases.  We
used to dump out the "total_scan" variable directly, but some of
the shrinker modifications along the way changed that.

This patch just dumps it out directly, again.  It doesn't make
any sense to derive it from new_nr and nr any more since there
are now other shrinkers that can be running in parallel and
mucking with those values.

Here's an example of the negative numbers in the output:

>          kswapd0-840   [000]   160.869398: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 10 new scan count 39 total_scan 29 last shrinker return val 256
>          kswapd0-840   [000]   160.869618: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 39 new scan count 102 total_scan 63 last shrinker return val 256
>          kswapd0-840   [000]   160.870031: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 102 new scan count 47 total_scan -55 last shrinker return val 768
>          kswapd0-840   [000]   160.870464: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 47 new scan count 45 total_scan -2 last shrinker return val 768
>          kswapd0-840   [000]   163.384144: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 45 new scan count 56 total_scan 11 last shrinker return val 0
>          kswapd0-840   [000]   163.384297: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 56 new scan count 15 total_scan -41 last shrinker return val 256
>          kswapd0-840   [000]   163.384414: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 15 new scan count 117 total_scan 102 last shrinker return val 0
>          kswapd0-840   [000]   163.384657: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 117 new scan count 36 total_scan -81 last shrinker return val 512
>          kswapd0-840   [000]   163.384880: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 36 new scan count 111 total_scan 75 last shrinker return val 256
>          kswapd0-840   [000]   163.385256: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 111 new scan count 34 total_scan -77 last shrinker return val 768
>          kswapd0-840   [000]   163.385598: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 34 new scan count 122 total_scan 88 last shrinker return val 512
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NDave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use BOOTMEM_DEFAULT instead of 0 in the comment.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, in put_compound_page(), we have

======
if (likely(!PageTail(page))) {                  <------  (1)
        if (put_page_testzero(page)) {
                 /*
                 ¦* By the time all refcounts have been released
                 ¦* split_huge_page cannot run anymore from under us.
                 ¦*/
                 if (PageHead(page))
                         __put_compound_page(page);
                 else
                         __put_single_page(page);
         }
         return;
}

/* __split_huge_page_refcount can run under us */
page_head = compound_head(page);        <------------ (2)
======

if at (1) ,  we fail the check, this means page is *likely* a tail page.

Then at (2), as compoud_head(page) is inlined, it is :

======
static inline struct page *compound_head(struct page *page)
{
          if (unlikely(PageTail(page))) {           <----------- (3)
              struct page *head = page->first_page;

                smp_rmb();
                if (likely(PageTail(page)))
                        return head;
        }
        return page;
}
======

here, the (3) unlikely in the case is a negative hint, because it is
*likely* a tail page.  So the check (3) in this case is not good, so I
introduce a helper for this case.

So this patch introduces compound_head_by_tail() which deals with a
possible tail page(though it could be spilt by a racy thread), and make
compound_head() a wrapper on it.

This patch has no functional change, and it reduces the object
size slightly:
   text    data     bss     dec     hex  filename
  11003    1328      16   12347    303b  mm/swap.o.orig
  10971    1328      16   12315    301b  mm/swap.o.patched

I've ran "perf top -e branch-miss" to observe branch-miss in this case.
As Michael points out, it's a slow path, so only very few times this case
happens.  But I grep'ed the code base, and found there still are some
other call sites could be benifited from this helper.  And given that it
only bloating up the source by only 5 lines, but with a reduced object
size.  I still believe this helper deserves to exsit.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The nmask argument to set_mempolicy() is const according to the user-space
header numaif.h, and since the kernel does indeed not modify it, it might
as well be declared const in the kernel.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The nmask argument to mbind() is const according to the userspace header
numaif.h, and since the kernel does indeed not modify it, it might as well
be declared const in the kernel.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A block device driver may choose to provide a rw_page operation.  These
will be called when the filesystem is attempting to do page sized I/O to
page cache pages (ie not for direct I/O).  This does preclude I/Os that
are larger than page size, so this may only be a performance gain for
some devices.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Tested-by: NDheeraj Reddy <dheeraj.reddy@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

page_endio() takes care of updating all the appropriate page flags once
I/O has finished to a page.  Switch to using mapping_set_error() instead
of setting AS_EIO directly; this will handle thin-provisioned devices
correctly.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last in-tree caller of block_write_full_page_endio() was removed in
January 2013.  It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At present, we have the following mutexes protecting data related to per
memcg kmem caches:

 - slab_mutex.  This one is held during the whole kmem cache creation
   and destruction paths.  We also take it when updating per root cache
   memcg_caches arrays (see memcg_update_all_caches).  As a result, taking
   it guarantees there will be no changes to any kmem cache (including per
   memcg).  Why do we need something else then?  The point is it is
   private to slab implementation and has some internal dependencies with
   other mutexes (get_online_cpus).  So we just don't want to rely upon it
   and prefer to introduce additional mutexes instead.

 - activate_kmem_mutex.  Initially it was added to synchronize
   initializing kmem limit (memcg_activate_kmem).  However, since we can
   grow per root cache memcg_caches arrays only on kmem limit
   initialization (see memcg_update_all_caches), we also employ it to
   protect against memcg_caches arrays relocation (e.g.  see
   __kmem_cache_destroy_memcg_children).

 - We have a convention not to take slab_mutex in memcontrol.c, but we
   want to walk over per memcg memcg_slab_caches lists there (e.g.  for
   destroying all memcg caches on offline).  So we have per memcg
   slab_caches_mutex's protecting those lists.

The mutexes are taken in the following order:

   activate_kmem_mutex -> slab_mutex -> memcg::slab_caches_mutex

Such a syncrhonization scheme has a number of flaws, for instance:

 - We can't call kmem_cache_{destroy,shrink} while walking over a
   memcg::memcg_slab_caches list due to locking order.  As a result, in
   mem_cgroup_destroy_all_caches we schedule the
   memcg_cache_params::destroy work shrinking and destroying the cache.

 - We don't have a mutex to synchronize per memcg caches destruction
   between memcg offline (mem_cgroup_destroy_all_caches) and root cache
   destruction (__kmem_cache_destroy_memcg_children).  Currently we just
   don't bother about it.

This patch simplifies it by substituting per memcg slab_caches_mutex's
with the global memcg_slab_mutex.  It will be held whenever a new per
memcg cache is created or destroyed, so it protects per root cache
memcg_caches arrays and per memcg memcg_slab_caches lists.  The locking
order is following:

   activate_kmem_mutex -> memcg_slab_mutex -> slab_mutex

This allows us to call kmem_cache_{create,shrink,destroy} under the
memcg_slab_mutex.  As a result, we don't need memcg_cache_params::destroy
work any more - we can simply destroy caches while iterating over a per
memcg slab caches list.

Also using the global mutex simplifies synchronization between concurrent
per memcg caches creation/destruction, e.g.  mem_cgroup_destroy_all_caches
vs __kmem_cache_destroy_memcg_children.

The downside of this is that we substitute per-memcg slab_caches_mutex's
with a hummer-like global mutex, but since we already take either the
slab_mutex or the cgroup_mutex along with a memcg::slab_caches_mutex, it
shouldn't hurt concurrency a lot.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we have two pairs of kmemcg-related functions that are called on
slab alloc/free.  The first is memcg_{bind,release}_pages that count the
total number of pages allocated on a kmem cache.  The second is
memcg_{un}charge_slab that {un}charge slab pages to kmemcg resource
counter.  Let's just merge them to keep the code clean.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset is a part of preparations for kmemcg re-parenting.  It
targets at simplifying kmemcg work-flows and synchronization.

First, it removes async per memcg cache destruction (see patches 1, 2).
Now caches are only destroyed on memcg offline.  That means the caches
that are not empty on memcg offline will be leaked.  However, they are
already leaked, because memcg_cache_params::nr_pages normally never drops
to 0 so the destruction work is never scheduled except kmem_cache_shrink
is called explicitly.  In the future I'm planning reaping such dead caches
on vmpressure or periodically.

Second, it substitutes per memcg slab_caches_mutex's with the global
memcg_slab_mutex, which should be taken during the whole per memcg cache
creation/destruction path before the slab_mutex (see patch 3).  This
greatly simplifies synchronization among various per memcg cache
creation/destruction paths.

I'm still not quite sure about the end picture, in particular I don't know
whether we should reap dead memcgs' kmem caches periodically or try to
merge them with their parents (see https://lkml.org/lkml/2014/4/20/38 for
more details), but whichever way we choose, this set looks like a
reasonable change to me, because it greatly simplifies kmemcg work-flows
and eases further development.

This patch (of 3):

After a memcg is offlined, we mark its kmem caches that cannot be deleted
right now due to pending objects as dead by setting the
memcg_cache_params::dead flag, so that memcg_release_pages will schedule
cache destruction (memcg_cache_params::destroy) as soon as the last slab
of the cache is freed (memcg_cache_params::nr_pages drops to zero).

I guess the idea was to destroy the caches as soon as possible, i.e.
immediately after freeing the last object.  However, it just doesn't work
that way, because kmem caches always preserve some pages for the sake of
performance, so that nr_pages never gets to zero unless the cache is
shrunk explicitly using kmem_cache_shrink.  Of course, we could account
the total number of objects on the cache or check if all the slabs
allocated for the cache are empty on kmem_cache_free and schedule
destruction if so, but that would be too costly.

Thus we have a piece of code that works only when we explicitly call
kmem_cache_shrink, but complicates the whole picture a lot.  Moreover,
it's racy in fact.  For instance, kmem_cache_shrink may free the last slab
and thus schedule cache destruction before it finishes checking that the
cache is empty, which can lead to use-after-free.

So I propose to remove this async cache destruction from
memcg_release_pages, and check if the cache is empty explicitly after
calling kmem_cache_shrink instead.  This will simplify things a lot w/o
introducing any functional changes.

And regarding dead memcg caches (i.e.  those that are left hanging around
after memcg offline for they have objects), I suppose we should reap them
either periodically or on vmpressure as Glauber suggested initially.  I'm
going to implement this later.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_MM_OWNER makes no sense.  It is not user-selectable, it is only
selected by CONFIG_MEMCG automatically.  So we can kill this option in
init/Kconfig and do s/CONFIG_MM_OWNER/CONFIG_MEMCG/ globally.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In mm/swap.c, __lru_cache_add() is exported, but actually there are no
users outside this file.

This patch unexports __lru_cache_add(), and makes it static.  It also
exports lru_cache_add_file(), as it is use by cifs and fuse, which can
loaded as modules.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kmem_cache_{create,destroy,shrink} need to get a stable value of
cpu/node online mask, because they init/destroy/access per-cpu/node
kmem_cache parts, which can be allocated or destroyed on cpu/mem
hotplug.  To protect against cpu hotplug, these functions use
{get,put}_online_cpus.  However, they do nothing to synchronize with
memory hotplug - taking the slab_mutex does not eliminate the
possibility of race as described in patch 2.

What we need there is something like get_online_cpus, but for memory.
We already have lock_memory_hotplug, which serves for the purpose, but
it's a bit of a hammer right now, because it's backed by a mutex.  As a
result, it imposes some limitations to locking order, which are not
desirable, and can't be used just like get_online_cpus.  That's why in
patch 1 I substitute it with get/put_online_mems, which work exactly
like get/put_online_cpus except they block not cpu, but memory hotplug.

[ v1 can be found at https://lkml.org/lkml/2014/4/6/68.  I NAK'ed it by
  myself, because it used an rw semaphore for get/put_online_mems,
  making them dead lock prune.  ]

This patch (of 2):

{un}lock_memory_hotplug, which is used to synchronize against memory
hotplug, is currently backed by a mutex, which makes it a bit of a
hammer - threads that only want to get a stable value of online nodes
mask won't be able to proceed concurrently.  Also, it imposes some
strong locking ordering rules on it, which narrows down the set of its
usage scenarios.

This patch introduces get/put_online_mems, which are the same as
get/put_online_cpus, but for memory hotplug, i.e.  executing a code
inside a get/put_online_mems section will guarantee a stable value of
online nodes, present pages, etc.

lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pgdat->reclaim_nodes tracks if a remote node is allowed to be reclaimed
by zone_reclaim due to its distance.  As it is expected that
zone_reclaim_mode will be rarely enabled it is unreasonable for all
machines to take a penalty.  Fortunately, the zone_reclaim_mode() path
is already slow and it is the path that takes the hit.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When it was introduced, zone_reclaim_mode made sense as NUMA distances
punished and workloads were generally partitioned to fit into a NUMA
node.  NUMA machines are now common but few of the workloads are
NUMA-aware and it's routine to see major performance degradation due to
zone_reclaim_mode being enabled but relatively few can identify the
problem.

Those that require zone_reclaim_mode are likely to be able to detect
when it needs to be enabled and tune appropriately so lets have a
sensible default for the bulk of users.

This patch (of 2):

zone_reclaim_mode causes processes to prefer reclaiming memory from
local node instead of spilling over to other nodes.  This made sense
initially when NUMA machines were almost exclusively HPC and the
workload was partitioned into nodes.  The NUMA penalties were
sufficiently high to justify reclaiming the memory.  On current machines
and workloads it is often the case that zone_reclaim_mode destroys
performance but not all users know how to detect this.  Favour the
common case and disable it by default.  Users that are sophisticated
enough to know they need zone_reclaim_mode will detect it.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: NDavidlohr Bueso <davidlohr@hp.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I recently added a patch to let folks pass a "reason" string dump_page()
which gets dumped out along with the page's data.  This essentially
saves the bug-reader a trip in to the source to figure out why we
BUG_ON()'d.

The new VM_BUG_ON_PAGE() passes in NULL for "reason".  It seems like we
might as well pass the BUG_ON() condition if we have it.  This will
bloat kernels a bit with ~160 new strings, but this is all under a
debugging option anyway.

	page:ffffea0008560280 count:1 mapcount:0 mapping:(null) index:0x0
	page flags: 0xbfffc0000000001(locked)
	page dumped because: VM_BUG_ON_PAGE(PageLocked(page))
	------------[ cut here ]------------
	kernel BUG at /home/davehans/linux.git/mm/filemap.c:464!
	invalid opcode: 0000 [#1] SMP
	CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #251
	Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
	...

[akpm@linux-foundation.org: include stringify.h]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NDavidlohr Bueso <davidlohr@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARN_ON() and WARN_ON_ONCE(), dependent on CONFIG_DEBUG_VM

Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>