- 31 12月, 2006 33 次提交
-
-
由 Sergei Shtylyov 提交于
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
kernel/lockdep.c: In function `lookup_chain_cache': kernel/lockdep.c:1339: warning: long long unsigned int format, u64 arg (arg 2) kernel/lockdep.c:1344: warning: long long unsigned int format, u64 arg (arg 2) Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arnaud Patard (Rtp 提交于
Russel King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h. Unfortunately, the spi_s3c24xx_gpio driver is using the wrong header. This patch is fixing that. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Frysinger 提交于
The KERNELDOC and DOCPROC variables are relative to the $(srctree)/$(objtree) and expect to be run only from there ... attached patch adds proper srctree/objtree prefixes to both variables. Acked-by: N"Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type Cc: Paul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shantanu Goel 提交于
Fix a rather obvious buglet. Noticed while instrumenting the VM using /proc/vmstat. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
Fix apollon board compiler error Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
Fix GPMC compiler errors on OMAP2 Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Return a fault code if the Dataflash driver runs into a "no device present" error when the MISO line has a pulldown (it currently expects a pullup), so that rmmod won't oops. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Fix build issues that show up with the m25p80 SPI flash driver when building with MTD debug enabled. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Some issues were recently turned up with the current specification of what it means for spi_transfer.tx_buf to be null, as part of transfers which are (from the SPI protocol driver perspective) pure reads. Specifically, that it seems better to change the TX behaviour there from "undefined" to "will shift zeroes". This lets protocol drivers (like the ads7846 driver) depend on that behavior. It's what most controller drivers in the tree are already doing (with one exception and one case of driver wanting-to-oops), it's what Microwire hardware will necessarily be doing, and it removes an issue whereby certain security audits would need to define such a value anyway as part of removing covert channels. This patch changes the specification to require shifting zeroes, and updates all currently merged SPI controller drivers to do so. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
(akpm: macros are wonderful) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dimitri Gorokhovik 提交于
Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init has now the __init attribute for both slab.c and slob.c. This routine cannot be removed after init in the case of slob.c -- it serves as a timer callback. Provide a separate timer callback routine, call it once from kmem_cache_init, keep the __init attribute on the latter. Signed-off-by: NDimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dimitri Gorokhovik 提交于
ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is not configured in, 'set_page_dirty' makes a call via a NULL pointer. Signed-off-by: NDimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
mod_sysfs_setup() doesn't return error when kobject_add_dir() failed. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Schwab 提交于
Signed-off-by: NAndreas Schwab <schwab@suse.de> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Remove the __resched_legal() check: it is conceptually broken. The biggest problem it had is that it can mask buggy cond_resched() calls. A cond_resched() call is only legal if we are not in an atomic context, with two narrow exceptions: - if the system is booting - a reacquire_kernel_lock() down() done while PREEMPT_ACTIVE is set But __resched_legal() hid this and just silently returned whenever these primitives were called from invalid contexts. (Same goes for cond_resched_locked() and cond_resched_softirq()). Furthermore, the __legal_resched(0) call was buggy in that it caused unnecessarily long softirq latencies via cond_resched_softirq(). (which is only called from softirq-off sections, hence the code did nothing.) The fix is to resurrect the efficiency of the might_sleep checks and to only allow the narrow exceptions. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mikael Pettersson 提交于
include/linux/utsrelease.h and include/linux/version.h aren't removed any more by mrproper in kernel 2.6.20-rc2. The patch below fixes this. The definition of MRPROPER_FILES looks weird: generated-headers looks like a misspelling of generated_headers, but that one is a Makefile target, not a variable or a file, so I don't see how including it in MRPROPER_FILES could have any effect. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
While trying to develop a line discipline I found a couple of things worth mentioning in Documentation/tty.txt which weren't, so I decided to add them. It would be nice if someone more knowledgeable than me in that area would look over them, in case I got something wrong. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Slaby 提交于
Many spinlock recursion was in the isicom driver. Eliminate it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Soeren Sonnenburg 提交于
The apple fn keys don't work anymore with 2.6.20-rc1. The reason is that USB_HID_POWERBOOK appears in several files although USB_HIDINPUT_POWERBOOK is the thing to be used. The patch fixes this. Cc: Greg KH <greg@kroah.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Moore 提交于
Update to maintainers list. My employer has changed the domain from lsil to lsi. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael S. Tsirkin 提交于
Commit bed8bdfd ("IB: kmemdup() cleanup") introduced one bad conversion to kmemdup() in mthca_alloc_fmr(), where the structure allocated and the structure copied are not the same size. Revert this back to the original kmalloc()/memcpy() code. Reported-by: Dotan Barak <dotanb@mellanox.co.il>. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@digitalvampire.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Slaby 提交于
tty_driver->owner is not set, so if somebody remove mxser_module, it might oops (and doesn't tell the user: no way, it's in use). Set the .owner value. Cc: <osv@javad.com> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Don't have macros between a function's kernel-doc block and the function definition. This is not valid for kernel-doc. Warning(/var/linsrc/linux-2.6.20-rc1-git8//drivers/pci/probe.c:653): No description found for parameter 'IORESOURCE_PCI_FIXED' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Meyer 提交于
Due to the changes to make the kernel relocateable a new file is created during the build process. [jirislaby@gmail.com: The .gitigonre was intended to be in arch/ subtree] Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
constrained_alloc(), which is called to detect where oom is from, checks passed zone_list(). If zone_list doesn't include all nodes, it thinks oom is from mempolicy. But there is memory-less-node. memory-less-node's zones are never included in zonelist[]. contstrained_alloc() should get memory_less_node into count. Otherwise, it always thinks 'oom is from mempolicy'. This means that current process dies at any time. This patch fix it. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Fix suspend hang: rcutorture threads need to be nofreeze. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
WARN_ON() ever triggering is a kernel bug. Do not try to paper over this fact by suggesting to the user that this is 'only' a warning, as the following recent commit does: commit 30e25b71 Author: Jeremy Fitzhardinge <jeremy@goop.org> Date: Fri Dec 8 02:36:24 2006 -0800 [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. ( it might make sense to rename BUG() to CRASH() and BUG_ON() to CRASH_ON(), but that does not change the fact that WARN_ON() signals a kernel bug. ) i and others objected to this change during lkml review: http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2 still the change slipped upstream - grumble :) Also, use the standard "BUG: " format to make it easier to grep logs and to make it easier to google for kernel bugs. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Judith Lebzelter 提交于
Choose rpa_vscsi.c over iseries_vscsi.c when building both pseries and iseries. This fixes a link error. Signed-off-by: NJudith Lebzelter <judith@osdl.org> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zach Brown 提交于
lockdep found a AB BC CA lock inversion in retry-based AIO: 1) The task struct's alloc_lock (A) is acquired in process context with interrupts enabled. An interrupt might arrive and call wake_up() which grabs the wait queue's q->lock (B). 2) When performing retry-based AIO the AIO core registers aio_wake_function() as the wake funtion for iocb->ki_wait. It is called with the wait queue's q->lock (B) held and then tries to add the iocb to the run list after acquiring the ctx_lock (C). 3) aio_kick_handler() holds the ctx_lock (C) while acquiring the alloc_lock (A) via lock_task() and unuse_mm(). Lockdep emits a warning saying that we're trying to connect the irq-safe q->lock to the irq-unsafe alloc_lock via ctx_lock. This fixes the inversion by calling unuse_mm() in the AIO kick handing path after we've released the ctx_lock. As Ben LaHaise pointed out __put_ioctx could set ctx->mm to NULL, so we must only access ctx->mm while we have the lock. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NSuparna Bhattacharya <suparna@in.ibm.com> Acked-by: NBenjamin LaHaise <bcrl@kvack.org> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sebastien Dugué 提交于
set_param_str() cannot use kstrdup() to duplicate the parameter. That's fine when the driver is compiled as a module but it sure is not when built into the kernel as the kernel parameters are parsed before the kmalloc slabs are setup. Signed-off-by: NSebastien Dugué <sebastien.dugue@bull.net> Acked-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 12月, 2006 5 次提交
-
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: fix stsch_reset. [S390] Change max. buffer size for monwriter device.
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (28 commits) V4L/DVB (5010): Cx88: Fix leadtek_eeprom tagging V4L/DVB (5012): Usbvision fix: It was using "&&" instead "&" V4L/DVB (5001): Add two required headers on kernel 2.6.20-rc1 V4L/DVB (5014): Allyesconfig build fixes on some non x86 arch V4L/DVB (4997): Bttv: delete duplicated ioremap() V4L/DVB (4996): Msp3400: fix kthread_run error check V4L/DVB (4995): Vivi: fix kthread_run() error check V4L/DVB (4994): Vivi: fix use after free in list_for_each() V4L/DVB (4992): Fix typo in saa7134-dvb.c V4L/DVB (4991): Cafe_ccic.c: fix NULL dereference V4L/DVB (4990): Cpia2/cpia2_usb.c: fix error-path leak V4L/DVB (4988): Cx2341x audio_properties is an u16, not u8 V4L/DVB (4984): LOG_STATUS should show the real temporal filter value. V4L/DVB (4983): Force temporal filter to 0 when scaling to prevent ghosting. V4L/DVB (4982): Fix broken audio mode handling for line-in in msp3400. V4L/DVB (4980): Fixes bug 7267: PAL/60 is not working V4L/DVB (4979): Fixes compilation when CONFIG_V4L1_COMPAT is not selected V4L/DVB (4973): Dvb-core: fix printk type warning V4L/DVB (4972): Dvb-core: fix bug in CRC-32 checking on 64-bit systems V4L/DVB (4970): Usbvision memory fixes ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (42 commits) r8169: extraneous Cmd{Tx/Rx}Enb write forcedeth: modified comment header NetXen: Reducing ring sizes for IOMMU issue. NetXen: Fix for PPC machines. NetXen: work queue fixes. NetXen: Link status message correction for quad port cards. NetXen: Multiple adapter fix. NetXen: Using correct CHECKSUM flag. NetXen: driver reload fix for newer firmware. NetXen: Adding new device ids. PHY probe not working properly for ibm_emac (PPC4xx) ep93xx: some minor cleanups to the ep93xx eth driver sky2: phy power down needs PCI config write enabled sky2: power management/MSI workaround sky2: dual port NAPI problem via-velocity uses INET interfaces e1000: Do not truncate TSO TCP header with 82544 workaround myri10ge: handle failures in suspend and resume myri10ge: no need to save MSI and PCIe state in the driver myri10ge: make msi configurable at runtime through sysfs ...
-
由 Linus Torvalds 提交于
* 'netxen-ioctl' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: netxen: remove private ioctl
-
由 Linus Torvalds 提交于
The VM layer (on the face of it, fairly reasonably) expected that when it does a ->writepage() call to the filesystem, it would write out the full page at that point in time. Especially since it had earlier marked the whole page dirty with "set_page_dirty()". But that isn't actually the case: ->writepage() does not actually write a page, it writes the parts of the page that have been explicitly marked dirty before, *and* that had not got written out for other reasons since the last time we told it they were dirty. That last caveat is the important one. Which _most_ of the time ends up being the whole page (since we had called "set_page_dirty()" on the page earlier), but if the filesystem had done any dirty flushing of its own (for example, to honor some internal write ordering guarantees), it might end up doing only a partial page IO (or none at all) when ->writepage() is actually called. That is the correct thing in general (since we actually often _want_ only the known-dirty parts of the page to be written out), but the shared dirty page handling had implicitly forgotten about these details, and had a number of cases where it was doing just the "->writepage()" part, without telling the low-level filesystem that the whole page might have been re-dirtied as part of being mapped writably into user space. Since most of the time the FS did actually write out the full page, we didn't notice this for a loong time, and this needed some really odd patterns to trigger. But it caused occasional corruption with rtorrent and with the Debian "apt" database, because both use shared mmaps to update the end result. This fixes it. Finally. After way too much hair-pulling. Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Acked-by: NMartin J. Bligh <mbligh@google.com> Acked-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NMartin Johansson <martin@fatbob.nu> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NAndrei Popa <andrei.popa@i-neo.ro> Cc: High Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Gordon Farquharson <gordonfarquharson@gmail.com> Cc: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Theodore Tso <tytso@mit.edu> Cc: Kenneth Cheng <kenneth.w.chen@intel.com> Cc: Tobias Diedrich <ranma@tdiedrich.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 12月, 2006 2 次提交
-
-
由 Michael Holzheu 提交于
Copy inline assembly of stsch and add "memory" to clobber list in order to prevent gcc from optimizing away the checking of the global variable "pgm_check_occured". Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Melissa Howland 提交于
Reduce the max. buffer size for the monwriter device to prevent a possible problem with the z/VM monitor service. Signed-off-by: NMelissa Howland <melissah@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-