- 08 3月, 2018 1 次提交
-
-
由 Bryan Whitehead 提交于
Add main source files for new lan743x driver Signed-off-by: NBryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2018 6 次提交
-
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: add support for some msg_control options from RFC6458 This patchset is to add support for 3 msg_control options described in RFC6458: 5.3.7. SCTP PR-SCTP Information Structure (SCTP_PRINFO) 5.3.9. SCTP Destination IPv4 Address Structure (SCTP_DSTADDRV4) 5.3.10. SCTP Destination IPv6 Address Structure (SCTP_DSTADDRV6) one send flag described in RFC6458: SCTP_SENDALL: This flag, if set, will cause a one-to-many style socket to send the message to all associations that are currently established on this socket. For the one-to- one style socket, this flag has no effect. Note there is another msg_control option: 5.3.8. SCTP AUTH Information Structure (SCTP_AUTHINFO) It's a little complicated, I will post it in another patchset after this. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add support for snd flag SCTP_SENDALL process in sendmsg, as described in section 5.3.4 of RFC6458. With this flag, you can send the same data to all the asocs of this sk once. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add support for Destination IPv4/6 Address options for sendmsg, as described in section 5.3.9/10 of RFC6458. With this option, you can provide more than one destination addrs to sendmsg when creating asoc, like sctp_connectx. It's also a necessary send info for sctp_sendv. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add support for PR-SCTP Information for sendmsg, as described in section 5.3.7 of RFC6458. With this option, you can specify pr_policy and pr_value for user data in sendmsg. It's also a necessary send info for sctp_sendv. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
When addressing a review comment in a early version of the offending patch a comment where left in which should have been removed. Remove the comment to keep it consistent with the code. Fixes: 75efa06f ("ravb: add support for changing MTU") Reported-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
The patch adds SLAB_ACCOUNT to flags of net_cachep cache, which enables accounting of struct net memory to memcg kmem. Since number of net_namespaces may be significant, user want to know, how much there were consumed, and control. Note, that we do not account net_generic to the same memcg, where net was accounted, moreover, we don't do this at all (*). We do not want the situation, when single memcg memory deficit prevents us to register new pernet_operations. (*)Even despite there is !current process accounting already available in linux-next. See kmalloc_memcg() there for the details. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2018 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 cleanups from Tony Luck: - More atomic cleanup from willy - Fix a python script to work with version 3 - Some other small cleanups * tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities" ia64/err-inject: Use get_user_pages_fast() ia64: doc: tweak whitespace for 'console=' parameter ia64: Convert remaining atomic operations ia64: convert unwcheck.py to python3
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in debug message text. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Davidlohr Bueso 提交于
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Sergei Trofimovich 提交于
CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Matthew Wilcox 提交于
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Corentin Labbe 提交于
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083 ("scripts: change scripts to use system python instead of env") Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
-
由 David S. Miller 提交于
Antoine Tenart says: ==================== net: mvpp2: jumbo frames support This series enable jumbo frames support in the Marvell PPv2 driver. The first 2 patches rework the buffer management, then two patches prepare for the final patch which adds the jumbo frames support into the driver. This is based on top of net-next, and was tested on a mcbin. Thanks! Antoine Since v1: - Improved the Tx FIFO initialization comment. - Improved the pool sanity check in mvpp2_bm_pool_use(). - Fixed pool related comments. - Cosmetic fixes (used BIT() whenever possible). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Chulski 提交于
This patch adds the support for jumbo frames in the Marvell PPv2 driver. A third buffer pool is added with 10KB buffers, which is used if the MTU is higher than 1518B for packets larger than 1518B. Please note only the port 0 supports hardware checksum offload due to the Tx FIFO size limitation. Signed-off-by: NStefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
This patch adds the NETIF_F_IPV6_CSUM to the driver's features to enable UDP/TCP checksum over IPv6. No extra configuration of the engine is needed on top of the IPv4 counterpart, which already is in the features list (NETIF_F_IP_CSUM). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Markman 提交于
This patch sets the Tx FIFO data size on port 0 to 10kB. This prepares the PPv2 driver for the Jumbo frame support addition as the hardware will need big enough Tx FIFO buffers when dealing with frames going through an interface with an MTU of 9000. Signed-off-by: NYan Markman <ymarkman@marvell.com> [Antoine: commit message, small reworks.] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Chulski 提交于
The buffer free routine is updated to release only given a number of buffers, and the destroy routine now checks the actual number of buffers in the (BPPI and BPPE) HW counters before draining the pools. This change helps getting jumbo frames support. Signed-off-by: NStefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Chulski 提交于
This patch configures the buffer manager long pool for all ports part of the same CP. Long pool separation between ports is redundant since there are no performance improvement when different pools are used. Signed-off-by: NStefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonathan Neuschäfer 提交于
This fixes the following kernel-doc warning: ./include/net/dst.h:366: warning: Function parameter or member 'net' not described in 'skb_tunnel_rx' Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonathan Neuschäfer 提交于
The other dst_cache_{get,set}_ip{4,6} functions, and the doc comment for dst_cache_set_ip6 use 'saddr' for their source address parameter. Rename the parameter to increase consistency. This fixes the following kernel-doc warnings: ./include/net/dst_cache.h:58: warning: Function parameter or member 'addr' not described in 'dst_cache_set_ip6' ./include/net/dst_cache.h:58: warning: Excess function parameter 'saddr' description in 'dst_cache_set_ip6' Fixes: 911362c7 ("net: add dst_cache support") Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonathan Neuschäfer 提交于
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2018 15 次提交
-
-
由 David S. Miller 提交于
Kirill Tkhai says: ==================== Converting pernet_operations (part #4) this series continues to review and to convert pernet_operations to make them possible to be executed in parallel for several net namespaces in the same time. The patches touch mostly netfilter, also there are small number of changes in other places. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations register and unregister sysctl. nf_conntrack_l4proto_gre4->init_net is simple memory initializer. Also, exit method removes gre keymap_list, which is per-net. This looks safe to be executed in parallel with other pernet_operations. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations register and unregister two conntrack notifiers, and they seem to be safe to be executed in parallel. General/not related to async pernet_operations JFI: ctnetlink_net_exit_batch() actions are grouped in batch, and this could look like there is synchronize_rcu() is forgotten. But there is synchronize_rcu() on module exit patch (in ctnetlink_exit()), so this batch may be reworked as simple .exit method. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations register and unregister sysctl and /proc entries. Exit batch method also waits till all per-net conntracks are dead. Thus, they are safe to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations initialize and destroy net_generic(net, ip_set_net_id)-related data. Since ip_set is under CONFIG_IP_SET, it's easy to watch drivers, which depend on this config. All of them are in net/netfilter/ipset directory, except of net/netfilter/xt_set.c. There are no more drivers, which use ip_set, and all of the above don't register another pernet_operations. Also, there are is no indirect users, as header file include/linux/netfilter/ipset/ip_set.h does not define indirect users by something like this: #ifdef CONFIG_IP_SET extern func(void); #else static inline func(void); #endif So, there are no more pernet operations, dereferencing net_generic(net, ip_set_net_id). ip_set_net_ops are OK to be executed in parallel for several net, so we mark them as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations initialize and destroy pernet net_generic(net, fou_net_id) list. The rest of net_generic(net, fou_net_id) accesses may happen after netlink message, and in-tree pernet_operations do not send FOU_GENL_NAME messages. So, these pernet_operations are safe to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations looks similar to dccp_v4_ops, and they are also safe to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations create and destroy net::dccp::v4_ctl_sk. It looks like another pernet_operations don't want to send dccp packets to dying or creating net. Batch method similar to ipv4/ipv6 sockets and it has to be safe to be executed in parallel with anything else. So, we mark them as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations have a deal with cgw_list, and the rest of accesses are made under rtnl_lock(). The only exception is cgw_dump_jobs(), which is accessed under rcu_read_lock(). cgw_dump_jobs() is called on netlink request, and it does not seem, foreign pernet_operations want to send a net such the messages. So, we mark them as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
Init method just allocates memory for new cfg, and assigns net_generic(net, caif_net_id). Despite there is synchronize_rcu() on error path in cfcnfg_create(), in real this function does not use global lists, so it looks like this synchronize_rcu() is some legacy inheritance. Exit method removes caif devices under rtnl_lock(). There could be a problem, if someone from foreign net pernet_operations dereference caif_net_id of this net. It's dereferenced in get_cfcnfg() and caif_device_list(). get_cfcnfg() is used from netdevice notifiers, where they are called under rtnl_lock(). The notifiers can't be called from foreign nets pernet_operations. Also, it's used from caif_disconnect_client() and from caif_connect_client(). The both of the functions work with caif socket, and there is the only possibility to have a socket, when the net is dead. This may happen only of the socket was created as kern using sk_alloc(). Grep by PF_CAIF shows we do not create kern caif sockets, so get_cfcnfg() is safe. caif_device_list() is used in netdevice notifiers and exit method under rtnl lock. Also, from caif_get() used in the netdev notifiers and in caif_flow_cb(). The last item is skb destructor. Since there are no kernel caif sockets nobody can send net a packet in parallel with init/exit, so this is also safe. So, these pernet_operations are safe to be async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations call xt_proto_init() and xt_proto_fini(), which just register and unregister /proc entries. They are safe to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations use nf_log_set() and nf_log_unset() in their methods: nf_log_bridge_net_ops nf_log_arp_net_ops nf_log_ipv4_net_ops nf_log_ipv6_net_ops nf_log_netdev_net_ops Nobody can send such a packet to a net before it's became registered, nobody can send a packet after all netdevices are unregistered. So, these pernet_operations are able to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations use ebt_register_table() and ebt_unregister_table() to act on the tables, which are used as argument in ebt_do_table(), called from ebtables hooks. Since there are no net-related bridge packets in-flight, when the init and exit methods are called, these pernet_operations are safe to be executed in parallel with any other. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
For tests using veth interfaces, the test infrastructure can create the netdevs if they do not exist. Arguably this is a preferred approach since the tests require p$N and p$(N+1) to be pairs. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Mendoza-Jonas 提交于
Add a generic netlink family for NCSI. This supports three commands; NCSI_CMD_PKG_INFO which returns information on packages and their associated channels, NCSI_CMD_SET_INTERFACE which allows a specific package or package/channel combination to be set as the preferred choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting. Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-