It is possible to get to sctp_v4_get_saddr() without a valid
association.  This happens when processing OOTB packets and
the cached route entry is no longer valid.
However, when responding to OOTB packets we already properly
set the source address based on the information in the OOTB
packet.  So, if we we get to sctp_v4_get_saddr() without an
association we can simply return.
Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based mostly upon a patch from Olaf Kirch <okir@suse.de>

When initialization fails in inet6_init(), we should
unregister the PF_INET6 socket ops.

Also, check sock_register()'s return value for errors.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

scsi_wait_req does not exist any more in the SCSI layer.  This patch
makes it so libata can compile again.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After the last merge of the new unified 'powerpc' architecture, ppc64 no
longer compiles cleanly as a standalone architecture.  Some bits and
pieces still exist as files under the old ppc64 hierarchy, but the old
"ARCH=ppc64" is dead.

So if "uname" says ppc64, that now implies that the default architecture
should be "powerpc".
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Tom 'spot' Callaway.

Even on uniprocessor we always reported the number of physical
cpus in the system via /proc/cpuinfo.  But when this got changed
to use num_possible_cpus() it always reads as "1" on uniprocessor.
This change was unintentional.

So scan the firmware device tree and count the number of cpu
nodes, and report that, as we always did.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently recvmsg generates SIGPIPE whereas sendmsg does not; for the
other stacks it seems to be the other way round!

It also fixes the bug where reading from a socket whose peer has shutdown
returned -EINVAL rather than 0.
Signed-off-by: NPatrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Part of a patch was accidentally reverted, this corrects an
inconsistent spinlock use in the IPMI message handler.
Signed-off-by: NHironobu Ishii <hishii@soft.fujitsu.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Recent TCP changes broke the build.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As part of the ISO C9x conversion gcc deprecates concatenation with
__FUNCTION__ because __FUNCTION__ is not a preprocessor macro.
Signed-off-by: NClemens Buchacher <drizzd@aon.at>
Signed-off-by: NMaximilian Attems <janitor@sternwelten.at>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The following patch support the SMC9111 present on DB1200 boards.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

 o Try to work around some of the undocumented "features" of the SAA9730
 o Use netdev_priv() instead of the previous broken mechanism to allocate
   the private data structure.
 o Try to make sure we don't leak resources on exit.
 o No more need to call SET_MODULE_OWNER in 2.6.
 o Use pci_free_consistent instead of homegrown architecture-specific
   allocation.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/saa9730.c |  531 +++++++++++++++++++++++---------------------------
 1 files changed, 249 insertions(+), 282 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Kill trailing whitespace, replace leading whitespace with tabs.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/saa9730.c |   98 +++++++++++++++++++++++++-------------------------
 1 files changed, 49 insertions(+), 49 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Added phy address 0 to the phy scan.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

This patch contains support for different modes of interrupt mitigation
of forcedeth. It includes changes based on Jeff's comments. Currently,
the modes are changed through module parameters since ethtool does not
support something similar.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

To ensure that phy_mask and any future elements of the mii_bus
structure are initialized use kzalloc() instead of kmalloc().

This fixes an issue in which phy_mask was not being initialized
and we would skip random phy addresses when scanning.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 7/7] s390: mail address changed

From: Frank Pavlic <fpavlic@de.ibm.com>
	- mail address changed to fpavlic@de.ibm.com
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 lcs.c       |    4 ++--
 qeth_main.c |    4 ++--
 qeth_mpc.c  |    2 +-
 qeth_mpc.h  |    2 +-
 qeth_sys.c  |    2 +-
 qeth_tso.h  |    2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 6/7] s390: introduce guestLan sniffer support in qeth

From: Peter Tiedemann  <ptiedem@de.ibm.com>
	- introduce guestLan sniffer support in qeth
	  feature allows a linux in a virtual machine
	  guest to become a network LAN sniffer,
	  monitoring and recording the networking traffic
	  within an entire guestLan.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 +
 qeth_main.c |   93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 qeth_mpc.h  |   11 ++++---
 3 files changed, 102 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 5/7] s390: fix recovery failure of non-guestLAN devices

From: Frank Pavlic <fpavlic@de.ibm.com>
	- Recovery of non-guestLAN Layer 2 device failed due to
	  trying to register the real MAC address we got from
	  the READ_MAC adapter parameters command.
	  We have to keep the "old" MAC address when we process
	  the reply of a READ_MAC.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |   12 ++++++------
 qeth_main.c |   27 ++++++++++++++++-----------
 2 files changed, 22 insertions(+), 17 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 4/7] s390: some more qeth fixes

From: Frank Pavlic <fpavlic@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
	- possible race on list fixed by reset
	  list processing after every operation
	- traffic hang fixed
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 3/7] s390: qeth multicast address registration fixed

From: Klaus Dieter Wacker <kdwacker@de.ibm.com>
	- when running in Layer2 mode we don't have to register
	  the multicast IP address but only group mac address.
	  Therefore for Layer 2 devices it is enough to go
	  through dev->mc_list list and register these entries.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |  106 +++++++++++++++++++++++++++++++++++++++++++++---------------
 1 files changed, 80 insertions(+), 26 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 2/7] s390: minor modification in qeth layer2 code

From: Frank Pavlic <fpavlic@de.ibm.com>
	- use qeth_layer2_send_setdelvlan_cb to check
	  return code of a SET/DELVLAN IP Assist command.
	  It fits better in qeth's design and mechanism of IP Assist
	  command handling.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   40 ++++++++++++++++++++++++++--------------
 1 files changed, 26 insertions(+), 14 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 1/7] s390: synthax checking for VIPA addresses fixed

From: Peter Tiedemann <ptiedem@de.ibm.com>
	- synthax checking for VIPA addresses fixed
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h     |   65 ++++++++++++++++++++++++++++++++++++++++++++++++-------------
 qeth_sys.c |    6 ++---
 2 files changed, 55 insertions(+), 16 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This will let me chop the code size of several drivers right down. In
many cases the actual private data is very useful and constant for a
given host controller so being able to just pass it at probe time would
be very useful indeed (eg with the via driver would could pass the udma
clocking and reduce the code size, or with the AMD one the UDMA
multiplier and the offset)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

* Merge PCMCIA card table with new Brodowski PCMCIA id table.
* Add missing entries to PCMCIA id table.
* Other tweaks to conform with Documentation/driver-changes.txt
  (types, call request_region, etc)
* Fix size of requested IO region.
* Reduce printk verbosity.
* Remove EXPERIMENTAL
* tweak to association code - don't force shared key authentication
  when wep in use.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Contributed by Jeroen <dekien@pandora.be>

We needed the VDSO symbols in the arch/ppc asm-offsets.c, and there
were a few usages of _systemcfg still left lying around.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When we created the instructions to read/write SPRs in xmon, we were
setting up a ppc64-style procedure descriptor and calling that, which
doesn't work in 32-bit.  For 32-bit a function pointer just points
to the instructions of the function.  This fixes it to do the right
thing for both 32-bit and 64-bit.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

32-bit SMP powermacs weren't booting with ARCH=powerpc because the
boot cpu wasn't saving away the state of various control registers,
but the secondary CPUs were loading them from the uninitialized
state.  This adds the necessary save-state call.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This removes a stray debugging printk which offended Anton.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>