kernel hangcheck needs to check RING_INSTDONE and SC_INSTDONE registers'
state to know if hardware is still running. In GVT-g environment, we need
to emulate these registers changing for all the guests although they are
not render owner. Here we return the physical state for all the guests,
then if INSTDONE is changing guest can know hardware is still running
although its workload is pending.

Read INSTDONE isn't one correct way to know if guest trigger gfx reset,
especially with Linux guest, it will read ACTH first, then check INSTDONE
and SUBSLICE registers to check if hardware is still running, at last
trigger gfx reset when it finds all the registers is frozen. In Windows
guest, read INSTDONE usually happens when OS detect TDR.

With the difference between Windows and Linux guest, "disable_warn_untrack"
may let debug log run into wrong state(Linux guest trigger hangcheck
with no ACTHD changed, then check INSTDONE), but actually there is no TDR
happened.

The new policy is always WARN with untrack MMIO r/w. Bad effect is many
noisy untrack mmio warning logs exist when real TDR happen. Even so you can
control the log output or not by setting the debug mask bit.

v2: remove log in instdone_mmio_read
Suggested-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Add some statistic routine to collect the time when vGPU is
scheduled in/out and the time of the last ctx submission.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Reviewed-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Extend function dispatch logic to support KBL platform.
Signed-off-by: NXu Han <xu.han@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Update MMIO handle policy to KBL platform.
Signed-off-by: NXu Han <xu.han@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Guest will write mmio mbctl which need a special handler in gvt to
clear the bit 4 to inidcate the write operation success.

V2: use bit definition macro to make code readable.
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

gvt_err should be used only for the very few critical error message
during host i915 drvier initialization. This patch
1. removes the redundant gvt_err;
2. creates a new gvt_vgpu_err to show errors caused by vgpu;
3. replaces the most gvt_err with gvt_vgpu_err;
4. leaves very few gvt_err for dumping gvt error during host gvt
   initialization.

v2. change name to gvt_vgpu_err and add vgpu id to the message. (Kevin)
    add gpu id to gvt_vgpu_err. (Zhi)
v3. remove gpu id from gvt_vgpu_err caller. (Zhi)
v4. add vgpu check to the gvt_vgpu_err macro. (Zhiyuan)
v5. add comments for v3 and v4.
v6. split the big patch into two, with this patch only for checking
    gvt_vgpu_err. (Zhenyu)
v7. rebase to staging branch
v8. rebase to fix branch
Signed-off-by: NTina Zhang <tina.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

this patch adds force non-priv registers check in LRI cmds handler

v4:
transform is_force_nonpriv_mmio() from macro to inline fuction to eliminate
checkpatch warning

v3:
per zhenyu's comment, fix some style warnings

v2:
per zhenyu's comment, refine the code to remove cascaded ifs
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

the ro_mask is not stored into each mmio entry

Fixes: 12d14cc4 ("drm/i915/gvt: Introduce a framework for tracking HW registers.")
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

register 0x20e0 should be mode register

v2: rebased to latest code base
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

those registers are render registers with F_CMD_ACCESS flag set
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

those registers are render registers, should have F_CMD_ACCESS flag set

v4:
rebase to lastest code base

v3:
per zhenyu's comments, move newly added registers to a separate patch

v2:
per Kevin's comments, move newly added registers to the tails of lists.
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Guest is now acces some MMIOs (0x215c, RING_INSTPM) through command which
is not originally in gvt's white list. This cause huge error log printed in
gvt.
This patch addes these MMIOs to the white list.

V2. change the commit message content.
V3. remove duplicate defination of 0x20c0.
V4. refine code style.
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Add pcode mailbox write emulation in gvt for BDW, reuse emulation code of
Skylake.

V2: refine comments, remove duplication defination of 0x138124, add
IS_SKYLAKE() check for Skylake only pcode commands.
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

In GVT-g we always emulate as pcode read/write success and ready for access
anytime, since we don't touch real physical registers here.

Add 'SKL_PCODE_CDCLK_CONTROL' write emulation, without it will cause
skl_set_cdclk fail in guest.
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Linux guest is using this MMIO in lri command. Add cmd_access flag
for this mmio in gvt to avoid error log.

v2: change the mmio address to its macro name
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

add a whitelist to check the content of force-nonpriv registers

v3:
per He Min's comment, modify in_whitelist()'s return type to bool, and use
negative value as the return value for failure for force_nonpriv_write().

v2:
1. split a big patch into two smaller ones per zhenyu's comment.
this patch is the mmio handling part for force-nopriv registers

2. per zhenyu's comment, combine all non-priv registers into a single
MMIO_DFH entry
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

send_display_send_uevent() sends two environment variable, and the
first one GVT_DISPLAY_READY is set including a new line at the end of
the string; that is obviously superfluous and wrong -- at least, it
*looks* so when you only read the code.

However, it doesn't appear in the actual output by a (supposedly
unexpected) trick.  The code uses snprintf() and truncates the string
in size 20 bytes.  This makes the string as GVT_DISPLAY_READY=0 or
...=1 including the trailing NUL-letter.  That is, the '\n' found in
the format string is always cut off as a result.

Although the code gives the correct result, it is confusing.  This
patch addresses it, just removing the superfluous '\n' from the format
string for avoiding further confusion.  If the argument "ready" were
not a  bool, the size 20 should be corrected as well.  But it's a
bool, so we can leave the magic number 20 as is for now.

FWIW, the bug was spotted by a new GCC7 warning:
  drivers/gpu/drm/i915/gvt/handlers.c: In function 'pvinfo_mmio_write':
  drivers/gpu/drm/i915/gvt/handlers.c:1042:34: error: 'snprintf' output truncated before the last format character [-Werror=format-truncation=]
    snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
                                    ^~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/gvt/handlers.c:1042:2: note: 'snprintf' output 21 bytes into a destination of size 20
    snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 04d348ae ("drm/i915/gvt: vGPU display virtualization")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1025903Reported-by: NRichard Biener <rguenther@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

some registers were missing or treated as BDW only. This patch is to fix it
avoid unhandled mmio wanrings

v2: update commit message according to zhenyu's comment
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Windows guest will notitfy GVT-g to request more resources through g2v
interface, when its resources are not enough.
This patch is to handle this case and let vgpu enter failsafe mode to
avoid too many error messages.
Signed-off-by: NMin He <min.he@intel.com>
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Lots of reduntant log info will be printed out during GPU reset,
including accessing untracked mmio register and fence register,
variable disable_warn_untrack is added previously to handle the
situation, but the accessing of fence register is ignored in the
previously patch, so add it back.

Besides, set the variable disable_warn_untrack to the defalut value
after GPU reset is finished.
Signed-off-by: NZhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

New failsafe mode is introduced, when we detect guest not supporting
GVT-g.
In failsafe mode, we will ignore all the MMIO and cfg space read/write
from guest.

This patch can fix the issue that when guest kernel or graphics driver
version is too low, there will be a lot of kernel traces in host.

V5: rebased onto latest gvt-staging
V4: changed coding style by Zhenyu and Ping's advice
V3: modified coding style and error messages according to Zhenyu's comment
V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified
function to enter failsafe mode
Signed-off-by: NMin He <min.he@intel.com>
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

GT reset and FLR share some operations and they are both implemented in
our new function intel_gvt_reset_vgpu_locked(). This patch rewrite the
gt reset handler using this new function.

Besides, this new implementation fixed the old issue in GT reset. The
old implementation reset GGTT entries which is illegal. We only clear
GGTT entries at PCI level reset.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Move the mmio space inititation function setup_vgpu_mmio()
and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated
source file mmio.c, and rename them as intel_vgpu_init_mmio()
and intel_vgpu_clean_mmio() respectively.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

All mmio handlers should return a negetive value for failure, not 1.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Return ealier for a invalid access, else it would false set
tlb flag for RCS.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The current prototype of new_mmio_info() uses void* for parameters read
and write, which are functions with precise calling conventions
(argument types and return type). Write down these conventions in
new_mmio_info() definition.

This has been reported by the following warnings when clang is used to
build the kernel:

    drivers/gpu/drm/i915/gvt/handlers.c:124:21: error: pointer type
    mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int,
    void *, unsigned int)') [-Werror,-Wpointer-type-mismatch]
            info->read = read ? read : intel_vgpu_default_mmio_read;
                              ^ ~~~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/gpu/drm/i915/gvt/handlers.c:125:23: error: pointer type
    mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int,
    void *, unsigned int)') [-Werror,-Wpointer-type-mismatch]
            info->write = write ? write : intel_vgpu_default_mmio_write;
                                ^ ~~~~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This allows the compiler to detect that sbi_ctl_mmio_write() returns a
"bool" value instead of an expected "int" one. Fix this.
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

OACONTROL changes quite a bit for gen8, with some bits split out into a
per-context OACTXCONTROL register. Rename now before adding more gen7 OA
registers
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NSourab Gupta <sourab.gupta@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-3-robert@sixbynine.org

We no longer cater for pre-production revisions of Skylake.

Fixes: d4362225 ("drm/i915/gvt: update misc ctl regs base on stepping info")
Cc: Ping Gao <ping.a.gao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Add more MMIO regs with command access flag for whitelist as they are
accessed by command.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Emulate right behavior for tlb_control, set to ZERO upon write.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NMin He <min.he@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

When SW wishes to reset the render engine, it will program
engine's reset control register and wait response from HW.
We need emulate the behavior of this register so guest i915
driver could walk through the engine reset flow. The registers
are not emulated in gvt yet, this patch add the emulation
logic.

v2: add more desc info in commit message.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Misc ctl related registers are for WA purpose, should detect the
stepping info first before updating HW value.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Need a explicit write_vreg in TLB MMIO write handler, beside that
TLB vreg should update correspondingly following HW status to do
correct emulation.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Missing write_vreg in DMA_CTRL write handler would make obsolete
value return when read vreg.

v2: get data from vreg after updating it.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.

v2: populate error to top of mmio emulation logic, comments from
zhenyu
Signed-off-by: NBing Niu <bing.niu@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The current_vgpu will set to NULL after stopping the scheduler when
the reset is triggered by current vgpu, so here need change the
judgement condition for current vgpu detection.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The emulation handler for MMIO GDRST miss vreg write in it, as result
the vreg cannot update correspondingly.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Switch to use new for_each_engine() helper to properly access
enabled intel_engine_cs as i915 core has changed that to be
dynamic managed. At GVT-g init time would still depend on ring
mask to determine engine list as it's earlier.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.

Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.

v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc

v3: fix use after free and remove intel_gvt.initialized

v4: change to_gvt() to an inline
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>