- 31 1月, 2011 5 次提交
-
-
由 Sascha Hauer 提交于
We need channel 0 of the sdma engine for internal purposes. We accomplished this by calling dma_request_channel() in the probe function. This does not work when multiple dma engines are present which is the case when IPU support for i.MX31/35 is compiled in. So instead of registering channel 0 and reserving it afterwards simply do not register it in the first place. With this the dmaengine channel counting does not match sdma channel counting anymore, so we have to use sdma channel counting in the driver. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
The capabilities are device specific fields, not channel specific fields. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
This is bogus as the dmaengine core will overwrite this field. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
This patch lets sdma_prep_slave_sg fail if the entries of an sg list do not start on multiples of the word size or if the lengths are not multiple of the word size. Also, catch the previously unhandled DMA_SLAVE_BUSWIDTH_8_BYTES and DMA_SLAVE_BUSWIDTH_UNDEFINED cases. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 21 1月, 2011 11 次提交
-
-
由 roel kluin 提交于
Fix error test in fan_{read,write}_reg() Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Rafael J. Wysocki 提交于
It turns out that some device drivers map pages from the ACPI NVS region during resume using ioremap(), which conflicts with ioremap_cache() used for mapping those pages by the NVS save/restore code in nvs.c. Make the NVS pages mapped by the code in nvs.c be unmapped before device drivers' resume routines run. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Commit ca9b600b ("ACPI / PM: Make suspend_nvs_save() use acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c from using different ioremap() variants by making the latter use acpi_os_map_memory() for mapping the NVS pages. However, that also requires acpi_os_unmap_memory() to be used for unmapping them, which causes synchronize_rcu() to be executed many times in a row unnecessarily and introduces substantial delays during resume on some systems. Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c introduce acpi_os_ioremap() calling ioremap_cache() and make the code in both osl.c and nvs.c use it. Reported-by: NJeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix collision with kernel-supplied #define: drivers/video/backlight/88pm860x_bl.c:24:1: warning: "CURRENT_MASK" redefined arch/x86/include/asm/page_64_types.h:6:1: warning: this is the location of the previous definition Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Janusz Krzysztofik 提交于
Replicate changes made to drivers/leds/ledtrig-backlight.c. Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
During system suspend, the "wait for ring buffer to empty" loop would always time out after three seconds, because the faster cached ring buffer head read would always return zero. Force the slow-and-careful PIO read on all but the first iterations of the loop to fix it. This also removes the unused (and useless) 'actual_head' variable that tried to approximate doing this, but did it incorrectly. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Cc: DRI mailing list <dri-devel@lists.freedesktop.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Richter 提交于
thanks to Clemens' and Maxim's fixes to firewire-ohci and -net in the last two kernel releases. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Maxim Levitsky 提交于
This makes it possible to resume communication with a node that dropped off the bus for a brief period. Otherwise communication will only be possible after ARP cache entry timeouts. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased)
-
由 Stefan Richter 提交于
Regression since commit 10389536, "firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony camcorder": The camcorder Canon MV5i generates lots of bus resets when asynchronous requests are sent to it (e.g. Config ROM read requests or FCP Command write requests) if the camcorder is not root node. This causes drop- outs in videos or makes the camcorder entirely inaccessible. https://bugzilla.redhat.com/show_bug.cgi?id=633260 Fix this by allowing any Canon device, even if it is a pre-1394a IRM like MV5i are, to remain root node (if it is at least Cycle Master capable). With the FireWire controller cards that I tested, MV5i always becomes root node when plugged in and left to its own devices. Reported-by: Ralf Lange Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.32.y and newer
-
由 Linus Torvalds 提交于
This partially reverts commit da8aeb92 ("ACPI / Battery: Update information on info notification and resume"), which causes a hang on resume on at least some machines. This bug was bisected on an ASUS EeePC 901, which hangs at resume time if we do that "acpi_battery_refresh(battery)" in the battery resume function. Rafael suspects we'll still need to refresh the sysfs files upon resume, but that that can be done from a PM notifier (that will run after thawing user space). Bisected-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 1月, 2011 3 次提交
-
-
由 Milton Miller 提交于
We sometimes need to map between the virtio device and the given pci device. One such use is OS installer that gets the boot pci device from BIOS and needs to find the relevant block device. Since it can't, installation fails. Instead of creating a top-level devices/virtio-pci directory, create each device under the corresponding pci device node. Symlinks to all virtio-pci devices can be found under the pci driver link in bus/pci/drivers/virtio-pci/devices, and all virtio devices under drivers/bus/virtio/devices. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Tested-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NGleb Natapov <gleb@redhat.com> Tested-by: N"Daniel P. Berrange" <berrange@redhat.com> Cc: stable@kernel.org
-
由 Rusty Russell 提交于
arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Christoph Lameter 提交于
Use this_cpu_ops in a couple of places in lguest. Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 19 1月, 2011 21 次提交
-
-
由 Jarod Wilson 提交于
When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: NJiri Fojtasek <jiri.fojtasek@hlohovec.net> Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jarod Wilson 提交于
The current hdpvr code kmalloc's a new buffer for every i2c read and write. Rather than do that, lets allocate a buffer in the driver's device struct and just use that every time. The size I've chosen for the buffer is the maximum size I could ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up to 128). Note that this might also remedy user reports of very sluggish behavior of IR receive with hdpvr hardware. v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare] Reported-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jarod Wilson 提交于
A number of things going on here, but the end result is that the IR part on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or lirc_zilog. First up, there are some conditional build fixes that come into play whether i2c is built-in or modular. Second, we're swapping out i2c_new_probed_device() for i2c_new_device(), as in my testing, probing always fails, but we *know* that all hdpvr devices have a z8 chip at 0x70 and 0x71. Third, we're poking at an i2c address directly without a client, and writing some magic bits to actually turn on this IR part (this could use some improvement in the future). Fourth, some of the i2c_adapter storage has been reworked, as the existing implementation used to lead to an oops following i2c changes c. 2.6.31. Earlier editions of this patch have been floating around the 'net for a while, including being patched into Fedora kernels, and they *do* work. This specific version isn't yet tested, beyond loading ir-kbd-i2c and confirming that it does bind to the RX address of the hdpvr. [mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug] Signed-off-by: NJarod Wilson <jarod@redhat.com> Acked-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jarod Wilson 提交于
Fixes an egregious bug in mceusb driver, where the receiver was being put into idle mode far sooner than it should have, thanks to storing a timeout value that in us where it should be ns. Basically, the receiver kept going into idle mode before a trailing space had been fully received, which was causing problems for some protocols, most notably manifesting as lirc userspace never receiving a trailing space for any rc5 signals. Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced after it was freed. Normally the i2c adapter is removed before this function is called. Removing the adapter will also unregister all subdevs on that adapter, so generally v4l2_device_unregister has nothing to do. However, in the case of a platform i2c bus that bus is generally not freed. In that case, after freeing the i2c subdevice the code will fall into the second block when it tests if the subdev is a SPI device. But by that time the subdev is already freed and the kernel oopses. The fix is trivial: continue with the loop after freeing the i2c or spi subdevice. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Reported-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Zeroing video_device.dev causes a memory leak if video_set_drvdata was called before video_register_device was called. video_set_drvdata calls dev_set_drvdata which allocates video_device.dev.p. memsetting this will prevent freeing of that memory. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
After a detach zero the whole device state to ensure a clean slate on the next attach. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
v4l2_queryctrl sets the step value based on the control type. That would be fine if it used the control type stored in the V4L2 kernel control object, not the one stored in the userspace ioctl structure that has just been memset to 0. Fix this. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then currently it is replaced by the real internal ID. This is not according to the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
VIDIOC_S_CTRL did not check against read-only controls. Even worse, for controls of type CTRL_CLASS it would cause a kernel oops since those controls do not have a s_ctrl op. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
When registering an IR Rx device with the I2C subsystem, provide more detailed information about the IR device and default remote configuration for the IR driver modules. Also explicitly register any IR Tx device with the I2C subsystem. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Acked-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
This reverts a portion of commit 44243fc2 A commit for which I errantly recommended that defaults for I2C address 0x71 not be set by ir-kbd-i2c.c The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting defaults for that address. Until I can get those bridge drivers fixed to properly send IR_i2c_init_data for boards with Zilog Z8 chips, just add back the default settings for I2C address 0x71. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
The ir_command() function is a do-nothing stub; remove it. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
This patch is an extensive rework of the ir_probe() and ir_remove() functions. It removes all the double binding and allocation problems on module load. It removes almost all the memory leaks on module exit and on device instantiation failure. Proper destruction of the Rx polling kthread still needs investigation and more work, but it is no worse than it already was. This rework also had side effects that include: - encapsulation of the ir_devices[] array - serialization of access to the ir_devices[] array - semantic change of the module parameter "disable_rx" to "tx_only" If tx_only is true, the module does not claim the i2c_client for the IR Rx function, and only claims and handles the i2c_client for the IR Tx function. This is a first step in providing the option of letting ir-kbd-i2c.c handle IR Rx function, while lirc_zilog handles the IR Tx function. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
Don't make private copies of the i2c clients provided by the I2C subsystem, don't change the client address field, and don't probe the client addresses - the bridge driver already did that. This moves us to the proper I2C and binding model. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
This change is a mostly mechanical break of the main struct IR data structure into common, Rx, and Tx structures. There were some small logical changes required as well, such as eliminating "is_hdpvr", to accomplish this. This change is an intiial step in reworking lirc_zilog to decouple the Rx and Tx handling as much as possible to fit with the new I2C binding model. This change actually makes lirc_zilog a little more broken than it already was - memory deallocation in particular got worse. However, this change makes the remaining problems easier to see and address. Signed-off-by: NAndy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-