- 13 5月, 2010 15 次提交
-
-
由 Allan Stephens 提交于
Convert tipc_msg_* inline routines that are more than one line into standard functions, thereby eliminating some repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Convert buf_acquire inline routine that is more than one line into a standard function, thereby eliminating some repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Convert bearer congestion inline routine that is more than one line into a standard function, thereby eliminating some repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Converts port list inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Converts nmap inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Convert address-related inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
These functions have enough code in them such that they seem like sensible targets for un-inlining. Prior to doing that, this adds the tipc_ prefix to the functions, so that in the event of a panic dump or similar, the subsystem from which the functions come from is immediately clear. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Rather than live in link.c where they can only be used in that file alone, these helper routines are better served by being in link.h Relocated are the following: link_working_working link_working_unknown link_reset_unknown link_reset_reset link_blocked link_congested Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This is just a straight return of a field; there is no value in the abstraction of hiding it behind a function. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Provide initial support for displaying overall TIPC status/statistics information at runtime. Currently, only version info for the TIPC kernel module is displayed. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Make a cosmetic change to the name displayed for the broadcast link, to better reflect its true nature. Since TIPC utilizes this link to distribute name table information, in addition to multicast messages sent by user applications, the prior name "multicast-link" is no longer appropriate. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate a couple of instances where TIPC's native API send routines were doing pointless initialization of local variables. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate some unused data structures in the TIPC configuration service that relate to the handling of link subscriptions, which were not supported when TIPC 1.5 was introduced. If and when support for link subscriptions is offered in TIPC, these elements may need to be re-introduced. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate an argument in a print statement that has no corresponding format specification. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate a field of the TIPC port structure that is populated, but never referenced. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2010 1 次提交
-
-
由 Jon Paul Maloy 提交于
This patch makes it explicit in the API that all fields in subscriptions and events exchanged with the Topology Server must be in network byte order. It also ensures that all fields of a subscription are compared when cancelling a subscription, in order to avoid inadvertent cancelling of the wrong subscription. Finally, the tipc module version is updated to 2.0.0, to reflect the API change. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2010 1 次提交
-
-
由 Hagen Paul Pfeifer 提交于
struct _zone *tipc_zones has local scope level and should defined with the correct scoping. CC: Per Liden <per.liden@nospam.ericsson.com> Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 25 3月, 2010 1 次提交
-
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2010 3 次提交
-
-
由 Neil Horman 提交于
Forward port commit fc477e160af086f6e30c3d4fdf5f5c000d29beb5 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Origional commit message: Allow retransmission of cloned buffers This patch fixes an issue with TIPC's message retransmission logic that prevented retransmission of clone sk_buffs. Originally intended as a means of avoiding wasted work in retransmitting messages that were still on the driver's outbound queue, it also prevented TIPC from retransmitting messages through other means -- such as the secondary bearer of the broadcast link, or another interface in a set of bonded interfaces. This fix removes existing checks for cloned sk_buffs that prevented such retransmission. Origionally-Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Forward port commit 29eb572941501c40ac6e62dbc5043bf9ee76ee56 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Origional commit message: Increase frequency of load distribution over broadcast link This patch enhances the behavior of TIPC's broadcast link so that it alternates between redundant bearers (if available) after every message sent, rather than after every 10 messages. This change helps to speed up delivery of retransmitted messages by ensuring that they are not sent repeatedly over a bearer that is no longer working, but not yet recognized as failed. Tested by myself in the latest net-2.6 tree using the tipc sanity test suite Origionally-signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> bcast.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
So in the forward porting of various tipc packages, I was constantly getting this lockdep warning everytime I used tipc-config to set a network address for the protocol: [ INFO: possible circular locking dependency detected ] 2.6.33 #1 tipc-config/1326 is trying to acquire lock: (ref_table_lock){+.-...}, at: [<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc] but task is already holding lock: (&(&entry->lock)->rlock#2){+.-...}, at: [<ffffffffa03150d5>] tipc_ref_lock+0x43/0x63 [tipc] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&entry->lock)->rlock#2){+.-...}: [<ffffffff8107b508>] __lock_acquire+0xb67/0xd0f [<ffffffff8107b78c>] lock_acquire+0xdc/0x102 [<ffffffff8145471e>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa03152b1>] tipc_ref_acquire+0xe8/0x11b [tipc] [<ffffffffa031433f>] tipc_createport_raw+0x78/0x1b9 [tipc] [<ffffffffa031450b>] tipc_createport+0x8b/0x125 [tipc] [<ffffffffa030f221>] tipc_subscr_start+0xce/0x126 [tipc] [<ffffffffa0308fb2>] process_signal_queue+0x47/0x7d [tipc] [<ffffffff81053e0c>] tasklet_action+0x8c/0xf4 [<ffffffff81054bd8>] __do_softirq+0xf8/0x1cd [<ffffffff8100aadc>] call_softirq+0x1c/0x30 [<ffffffff810549f4>] _local_bh_enable_ip+0xb8/0xd7 [<ffffffff81054a21>] local_bh_enable_ip+0xe/0x10 [<ffffffff81454d31>] _raw_spin_unlock_bh+0x34/0x39 [<ffffffffa0308eb8>] spin_unlock_bh.clone.0+0x15/0x17 [tipc] [<ffffffffa0308f47>] tipc_k_signal+0x8d/0xb1 [tipc] [<ffffffffa0308dd9>] tipc_core_start+0x8a/0xad [tipc] [<ffffffffa01b1087>] 0xffffffffa01b1087 [<ffffffff8100207d>] do_one_initcall+0x72/0x18a [<ffffffff810872fb>] sys_init_module+0xd8/0x23a [<ffffffff81009b42>] system_call_fastpath+0x16/0x1b -> #0 (ref_table_lock){+.-...}: [<ffffffff8107b3b2>] __lock_acquire+0xa11/0xd0f [<ffffffff8107b78c>] lock_acquire+0xdc/0x102 [<ffffffff81454836>] _raw_write_lock_bh+0x3b/0x6e [<ffffffffa0315148>] tipc_ref_discard+0x53/0xd4 [tipc] [<ffffffffa03141ee>] tipc_deleteport+0x40/0x119 [tipc] [<ffffffffa0316e35>] release+0xeb/0x137 [tipc] [<ffffffff8139dbf4>] sock_release+0x1f/0x6f [<ffffffff8139dc6b>] sock_close+0x27/0x2b [<ffffffff811116f6>] __fput+0x12a/0x1df [<ffffffff811117c5>] fput+0x1a/0x1c [<ffffffff8110e49b>] filp_close+0x68/0x72 [<ffffffff8110e552>] sys_close+0xad/0xe7 [<ffffffff81009b42>] system_call_fastpath+0x16/0x1b Finally decided I should fix this. Its a straightforward inversion, tipc_ref_acquire takes two locks in this order: ref_table_lock entry->lock while tipc_deleteport takes them in this order: entry->lock (via tipc_port_lock()) ref_table_lock (via tipc_ref_discard()) when the same entry is referenced, we get the above warning. The fix is equally straightforward. Theres no real relation between the entry->lock and the ref_table_lock (they just are needed at the same time), so move the entry->lock aquisition in tipc_ref_acquire down, after we unlock ref_table_lock (this is safe since the ref_table_lock guards changes to the reference table, and we've already claimed a slot there. I've tested the below fix and confirmed that it clears up the lockdep issue Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2010 2 次提交
-
-
由 Neil Horman 提交于
Port commit 20deb48d16fdd07ce2fdc8d03ea317362217e085 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Part of the large effort I'm trying to help with getting all the downstreamed code from windriver forward ported to the upstream tree Origional commit message Restore check to filter out inadverdently received messages This patch reimplements a check that allows TIPC to discard messages that are not intended for it. This check was present in TIPC 1.5/1.6, but was removed by accident during the development of TIPC 1.7; it has now been updated to account for new features present in TIPC 1.7 and reinserted into TIPC. The main benefit of this check is to filter out messages arriving from orphaned link endpoints, which can arise when a node exits the network and then re-enters it with a different TIPC network address (i.e. <Z.C.N> value). Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Origionally-authored-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Remove htohl implementation from tipc I was working on forward porting the downstream commits for TIPC and ran accross this one: http://tipc.cslab.ericsson.net/cgi-bin/gitweb.cgi?p=people/allan/tipc.git;a=commitdiff;h=894279b9437b63cbb02405ad5b8e033b51e4e31e I was going to just take it, when I looked closer and noted what it was doing. This is basically a routine to byte swap fields of data in sent/received packets for tipc, dependent upon the receivers guessed endianness of the peer when a connection is established. Asside from just seeming silly to me, it appears to violate the latest RFC draft for tipc: http://tipc.sourceforge.net/doc/draft-spec-tipc-02.txt Which, according to section 4.2 and 4.3.3, requires that all fields of all commands be sent in network byte order. So instead of just taking this patch, instead I'm removing the htohl function and replacing the calls with calls to ntohl in the rx path and htonl in the send path. As part of this fix, I'm also changing the subscr_cancel function, which searches the list of subscribers, using a memcmp of the entire subscriber list, for the entry to tear down. unfortunately it memcmps the entire tipc_subscr structure which has several bits that are private to the local side, so nothing will ever match. section 5.2 of the draft spec indicates the <type,upper,lower> tuple should uniquely identify a subscriber, so convert subscr_cancel to just match on those fields (properly endian swapped). I've tested this using the tipc test suite, and its passed without issue. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2010 2 次提交
-
-
由 Zhu Yi 提交于
sk_add_backlog -> __sk_add_backlog sk_add_backlog_limited -> sk_add_backlog Signed-off-by: NZhu Yi <yi.zhu@intel.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yi 提交于
Make tipc adapt to the limited socket backlog change. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2010 1 次提交
-
-
由 Neil Horman 提交于
Fix TIPC to disallow sending to remote addresses prior to entering NET_MODE user programs can oops the kernel by sending datagrams via AF_TIPC prior to entering networked mode. The following backtrace has been observed: ID: 13459 TASK: ffff810014640040 CPU: 0 COMMAND: "tipc-client" [exception RIP: tipc_node_select_next_hop+90] RIP: ffffffff8869d3c3 RSP: ffff81002d9a5ab8 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000001001001 RBP: 0000000001001001 R8: 0074736575716552 R9: 0000000000000000 R10: ffff81003fbd0680 R11: 00000000000000c8 R12: 0000000000000008 R13: 0000000000000001 R14: 0000000000000001 R15: ffff810015c6ca00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 RIP: 0000003cbd8d49a3 RSP: 00007fffc84e0be8 RFLAGS: 00010206 RAX: 000000000000002c RBX: ffffffff8005d116 RCX: 0000000000000000 RDX: 0000000000000008 RSI: 00007fffc84e0c00 RDI: 0000000000000003 RBP: 0000000000000000 R8: 00007fffc84e0c10 R9: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc84e0d10 R14: 0000000000000000 R15: 00007fffc84e0c30 ORIG_RAX: 000000000000002c CS: 0033 SS: 002b What happens is that, when the tipc module in inserted it enters a standalone node mode in which communication to its own address is allowed <0.0.0> but not to other addresses, since the appropriate data structures have not been allocated yet (specifically the tipc_net pointer). There is nothing stopping a client from trying to send such a message however, and if that happens, we attempt to dereference tipc_net.zones while the pointer is still NULL, and explode. The fix is pretty straightforward. Since these oopses all arise from the dereference of global pointers prior to their assignment to allocated values, and since these allocations are small (about 2k total), lets convert these pointers to static arrays of the appropriate size. All the accesses to these bits consider 0/NULL to be a non match when searching, so all the lookups still work properly, and there is no longer a chance of a bad dererence anywhere. As a bonus, this lets us eliminate the setup/teardown routines for those pointers, and elimnates the need to preform any locking around them to prevent access while their being allocated/freed. I've updated the tipc_net structure to behave this way to fix the exact reported problem, and also fixed up the tipc_bearers and media_list arrays to fix an obvious simmilar problem that arises from issuing tipc-config commands to manipulate bearers/links prior to entering networked mode I've tested this for a few hours by running the sanity tests and stress test with the tipcutils suite, and nothing has fallen over. There have been a few lockdep warnings, but those were there before, and can be addressed later, as they didn't actually result in any deadlock. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Allan Stephens <allan.stephens@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: tipc-discussion@lists.sourceforge.net bearer.c | 37 ++++++------------------------------- bearer.h | 2 +- net.c | 25 ++++--------------------- 3 files changed, 11 insertions(+), 53 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2010 1 次提交
-
-
由 Allan Stephens 提交于
This patch addresses a number of minor (mostly cosmetic) issues relating to the configuration of TIPC, including the following: - Corrects range limits for maximum number of ports per node - Adds missing range limits for size of log buffer - Removes configuration setting relating to unsupported slave node capability - Standardizes description and help text wording for configuration settings - Removes unneeded blank spaces Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2010 1 次提交
-
-
由 Amerigo Wang 提交于
We can rely on kconfig to limit these numbers, no need to limit them at compile time/run time. Users who modify these numbers manually should be responsible for themself. :) Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2009 1 次提交
-
-
由 Octavian Purdila 提交于
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2009 1 次提交
-
-
由 Eric Paris 提交于
The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2009 1 次提交
-
-
由 David S. Miller 提交于
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2009 1 次提交
-
-
由 roel kluin 提交于
For the bearer_priority to be less than TIPC_MIN_LINK_PRI and greater than TIPC_MAX_LINK_PRI is logically impossible. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2009 1 次提交
-
-
由 Johannes Berg 提交于
This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2009 1 次提交
-
-
This patch allows a TIPC application to determine the number of messages currently waiting in a socket's receive queue (TIPC_SOCK_RECVQ_DEPTH) or in all TIPC socket receive queues (TIPC_NODE_RECVQ_DEPTH). Signed-off-by: NOscar Medina <oscar.medina@motorola.com> Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2009 1 次提交
-
-
由 Michał Mirosław 提交于
Use genl_register_family_with_ops() instead of a copy. This also changes netlink related variable names to be kernel-wide unique for consistency with other users. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
Patch fixes issues with dev->dev_addr changing from array to pointer. Hopefully there are no others. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
Fix warnings from current gcc about using non-const strings as printf args in TIPC. Compile tested only (not a TIPC user). Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-