- 14 7月, 2017 12 次提交
-
-
由 WANG Cong 提交于
When we convert atomic_t to refcount_t, a new kernel warning on "increment on 0" is introduced in the netpoll code, zap_completion_queue(). In fact for this special case, we know the refcount is 0 and we just have to set it to 1 to satisfy the following dev_kfree_skb_any(), so we can just use refcount_set(..., 1) instead. Fixes: 63354797 ("net: convert sk_buff.users from atomic_t to refcount_t") Reported-by: NDave Jones <davej@codemonkey.org.uk> Cc: Reshetova, Elena <elena.reshetova@intel.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Enrico Mioso 提交于
Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: NEnrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: NChristian Panton <christian@panton.org> Reviewed-by: NBjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Blumenstingl 提交于
mdio_mux_init parses the child nodes of the MDIO mux. When using "mdio-mux-mmioreg" the child nodes are describing the register value that is written to switch between the MDIO busses. The change which makes the error messages more verbose changed the parsing of the "reg" property from a simple of_property_read_u32 call to of_mdio_parse_addr. On a Khadas VIM (based on the Meson GXL SoC, which uses mdio-mux-mmioreg) this prevents registering the MDIO mux (because the "reg" values on the MDIO mux child nodes are 0x2009087f and 0xe40908ff) and leads to the following errors: mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff PHY address -469169921 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@e40908ff mdio-mux-mmioreg c883455c.eth-phy-mux: /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f PHY address 537462911 is too large mdio-mux-mmioreg c883455c.eth-phy-mux: Error: Failed to find reg for child /soc/periphs@c8834000/eth-phy-mux/mdio@2009087f mdio-mux-mmioreg c883455c.eth-phy-mux: Error: No acceptable child buses found mdio-mux-mmioreg c883455c.eth-phy-mux: failed to register mdio-mux bus /soc/periphs@c8834000/eth-phy-mux (as a result of that ethernet is not working, because the PHY which is connected through the mux' child MDIO bus, which is not being registered). Fix this by reverting the change from of_mdio_parse_addr to of_mdio_parse_addr. Fixes: 342fa196 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
The configure callback of fib_rules_ops can change the refcnt of a fib rule. For instance, mlxsw takes a refcnt when adding the processing of the rule to a work queue. Thus the rule refcnt can not be reset to to 1 afterwards. Move the refcnt setting to after the allocation. Fixes: 5361e209 ("net: avoid one splat in fib_nl_delrule()") Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rolf Eike Beer 提交于
Signed-off-by: NRolf Eike Beer <eb@emlix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
Add 0x50a3 and 0x50a4 T5 device id's Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate array error_code on the stack but make it static. Makes the object code smaller by almost 250 bytes: Before: text data bss dec hex filename 10366 983 0 11349 2c55 net/dccp/input.o After: text data bss dec hex filename 10161 1039 0 11200 2bc0 net/dccp/input.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate array route_possibilities on the stack but make it static const. Makes the object code a little smaller by 85 bytes: Before: text data bss dec hex filename 9901 2448 0 12349 303d dwmac4_core.o After: text data bss dec hex filename 9760 2504 0 12264 2fe8 dwmac4_core.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate various tables on the stack but make them static const. Makes the object code smaller by nearly 200 bytes: Before: text data bss dec hex filename 113468 11200 0 124668 1e6fc bnx2x_ethtool.o After: text data bss dec hex filename 113129 11344 0 124473 1e639 bnx2x_ethtool.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Bogendoerfer 提交于
This change fixes following problem [ 1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2 which leads to a missing ethernet interface (reproducable at least on Gigabyte MP30-AR0 and APM Mustang systems). The check for a valid clk resource fails, because DT doesn't provide a clock for sgenet1. But the driver doesn't use this clk, if the ethernet port is connected via SGMII. Therefore this patch avoids probing for clk on SGMII interfaces. Fixes: 9aea7779 ("drivers: net: xgene: Fix crash on DT systems") Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kefeng Wang 提交于
The bpf_skb_adjust_net() ignores the return value of bpf_skb_net_shrink/grow, and always return 0, fix it by return 'ret'. Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2017 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari and Arnd Bergmann. 2) Fix race in statistics gathering in bnxt_en driver, from Michael Chan. 3) Can't use a mutex in RCU reader protected section on tap driver, from Cong WANG. 4) Fix mdb leak in bridging code, from Eduardo Valentin. 5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter. 6) Buffer overflow in brcmfmac driver, from Arend van SPriel. 7) ioremap_nocache() return value needs to be checked in smsc911x driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) net: stmmac: revert "support future possible different internal phy mode" sfc: don't read beyond unicast address list datagram: fix kernel-doc comments socket: add documentation for missing elements smsc911x: Add check for ioremap_nocache() return code brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx() net: hns: Bugfix for Tx timeout handling in hns driver net: ipmr: ipmr_get_table() returns NULL nfp: freeing the wrong variable mlxsw: spectrum_switchdev: Check status of memory allocation mlxsw: spectrum_switchdev: Remove unused variable mlxsw: spectrum_router: Fix use-after-free in route replace mlxsw: spectrum_router: Add missing rollback samples/bpf: fix a build issue bridge: mdb: fix leak on complete_info ptr on fail path tap: convert a mutex to a spinlock cxgb4: fix BUG() on interrupt deallocating path of ULD qed: Fix printk option passed when printing ipv6 addresses net: Fix minor code bug in timestamping.txt net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer ...
-
由 Linus Torvalds 提交于
I made the mistake of upgrading my desktop to the new Fedora 26 that comes with gcc-7.1.1. There's nothing wrong per se that I've noticed, but I now have 1500 lines of warnings, mostly from the new format-truncation warning triggering all over the tree. We use 'snprintf()' and friends in a lot of places, and often know that the numbers are fairly small (ie a controller index or similar), but gcc doesn't know that, and sees an 'int', and thinks that it could be some huge number. And then complains when our buffers are not able to fit the name for the ten millionth controller. These warnings aren't necessarily bad per se, and we probably want to look through them subsystem by subsystem, but at least during the merge window they just mean that I can't even see if somebody is introducing any *real* problems when I pull. So warnings disabled for now. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.13 merge window: - Minor code cleanups - Avoid accessing mod struct prior to checking module struct version, from Kees - Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from Luis" * tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: make the modinfo name const kmod: reduce atomic operations on kmod_concurrent and simplify module: use list_for_each_entry_rcu() on find_module_all() kernel/module.c: suppress warning about unused nowarn variable module: Add module name to modinfo module: Pass struct load_info into symbol checks
-
由 LABBE Corentin 提交于
Since internal phy-mode is reserved for non-xMII protocol we cannot use it with dwmac-sun8i. Furthermore, all DT patchs which comes with this patch were cleaned, so the current state is broken. This reverts commit 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode") Fixes: 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode") Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Stephen Hemminger says: ==================== minor net kernel-doc fixes Fix a couple of small errors in kernel-doc for networking ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
An underscore in the kernel-doc comment section has special meaning and mis-use generates an errors. ./net/core/datagram.c:207: ERROR: Unknown target name: "msg". ./net/core/datagram.c:379: ERROR: Unknown target name: "msg". ./net/core/datagram.c:816: ERROR: Unknown target name: "t". Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Fill in missing kernel-doc for missing elements in struct sock. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Khoroshilov 提交于
There is no check for return code of smsc911x_drv_probe() in smsc911x_drv_probe(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "This pull request contains: - i2c core reorganization. One source file became too monolithic. It is now split up, yet we still have the same named object as the final output. This should ease maintenance. - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX - designware driver gained slave mode support - xgene-slimpro driver gained ACPI support - bigger overhaul for pca-platform driver - the algo-bit module now supports messages with enforced STOP - slightly bigger than usual set of driver updates and improvements and with much appreciated quality assurance from Andy Shevchenko" * 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: Provide a stub for i2c_detect_slave_mode() i2c: designware: Let slave adapter support be optional i2c: designware: Make HW init functions static i2c: designware: fix spelling mistakes i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus i2c: pca-platform: correctly set algo_data.reset_chip i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices i2c: designware: enable SLAVE in platform module i2c: designware: add SLAVE mode functions i2c: zx2967: drop COMPILE_TEST dependency i2c: zx2967: always use the same device when printing errors i2c: pca-platform: use dev_warn/dev_info instead of printk i2c: pca-platform: use device managed allocations i2c: pca-platform: add devicetree awareness i2c: pca-platform: switch to struct gpio_desc dt-bindings: add bindings for i2c-pca-platform i2c: cadance: fix ctrl/addr reg write order i2c: zx2967: add i2c controller driver for ZTE's zx2967 family dt: bindings: add documentation for zx2967 family i2c controller i2c: algo-bit: add support for I2C_M_STOP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs updates from Miklos Szeredi: "This work from Amir introduces the inodes index feature, which provides: - hardlinks are not broken on copy up - infrastructure for overlayfs NFS export This also fixes constant st_ino for samefs case for lower hardlinks" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (33 commits) ovl: mark parent impure and restore timestamp on ovl_link_up() ovl: document copying layers restrictions with inodes index ovl: cleanup orphan index entries ovl: persistent overlay inode nlink for indexed inodes ovl: implement index dir copy up ovl: move copy up lock out ovl: rearrange copy up ovl: add flag for upper in ovl_entry ovl: use struct copy_up_ctx as function argument ovl: base tmpfile in workdir too ovl: factor out ovl_copy_up_inode() helper ovl: extract helper to get temp file in copy up ovl: defer upper dir lock to tempfile link ovl: hash overlay non-dir inodes by copy up origin ovl: cleanup bad and stale index entries on mount ovl: lookup index entry for copy up origin ovl: verify index dir matches upper dir ovl: verify upper root dir matches lower root dir ovl: introduce the inodes index dir feature ovl: generalize ovl_create_workdir() ...
-
由 Al Viro 提交于
Reported-and-tested-by: NMeelis Roos <mroos@linux.ee> Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2017 15 次提交
-
-
由 Arend van Spriel 提交于
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by: N"freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lin Yun Sheng 提交于
When hns port type is not debug mode, netif_tx_disable is called when there is a tx timeout, which requires system reboot to return to normal state. This patch fix this problem by resetting the net dev. Fixes: b5996f11 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: NLin Yun Sheng <linyunsheng@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The ipmr_get_table() function doesn't return error pointers it returns NULL on error. Fixes: 4f75ba69 ("net: ipmr: Add ipmr_rtm_getroute") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We accidentally free a NULL pointer and leak the pointer we want to free. Also you can tell from the label name what was intended. :) Fixes: abfcdc1d ("nfp: add a stats handler for flower offloads") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: spectrum: Various fixes First patch adds a missing rollback in error path. Second patch prevents a use-after-free during IPv4 route replace. Last two patches fix warnings from static checkers. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
We can't rely on kzalloc() always succeeding, so check its return value. Suppresses the following smatch error: mlxsw_sp_switchdev_event() error: potential null dereference 'switchdev_work->fdb_info.addr'. (kzalloc returns null) Fixes: af061378 ("mlxsw: spectrum_switchdev: Add support for learning FDB through notification") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Commit 10e23eb2 ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") removed statements that used 'bridge_vlan', but didn't remove the variable itself resulting in the following warning with W=1: warning: variable ‘bridge_vlan’ set but not used [-Wunused-but-set-variable] Remove the variable and suppress the warning. Fixes: 10e23eb2 ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
While working on IPv6 route replace I realized we can have a use-after-free in IPv4 in case the replaced route is offloaded and the only one using its FIB info. The problem is that fib_table_insert() drops the reference on the FIB info of the replaced routes which is eventually freed via call_rcu(). Since the driver doesn't hold a reference on this FIB info it can cause a use-after-free when it tries to clear the RTNH_F_OFFLOAD flag stored in fi->fib_flags. After running the following commands in a loop for enough time with a KASAN enabled kernel I finally got the below trace. $ ip route add 192.168.50.0/24 via 192.168.200.1 dev enp3s0np3 $ ip route replace 192.168.50.0/24 dev enp3s0np5 $ ip route del 192.168.50.0/24 dev enp3s0np5 BUG: KASAN: use-after-free in mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] Read of size 4 at addr ffff8803717d9820 by task kworker/u4:2/55 [...] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_router_neighs_update_work+0x1cd0/0x1ce0 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] __asan_load4+0x61/0x80 mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] mlxsw_sp_fib_entry_offload_refresh+0xb6/0x370 [mlxsw_spectrum] mlxsw_sp_router_fib_event_work+0xd1c/0x2780 [mlxsw_spectrum] [...] Freed by task 5131: save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kfree+0x144/0x570 free_fib_info_rcu+0x2e7/0x410 rcu_process_callbacks+0x4f8/0xe30 __do_softirq+0x1d3/0x9e2 Fix this by taking a reference on the FIB info when creating the nexthop group it represents and drop it when the group is destroyed. Fixes: 599cf8f9 ("mlxsw: spectrum_router: Add support for route replace") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
With this patch the error path of mlxsw_sp_nexthop_init() is symmetric with mlxsw_sp_nexthop_fini(). Noticed during code review. Fixes: a8c97014 ("mlxsw: spectrum_router: Refactor nexthop init routine") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: - Fix symbol version generation for assembler on sparc, from Nagarathnam Muthusamy. - Fix compound page handling in gup_huge_pmd(), from Nitin Gupta. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix gup_huge_pmd Adding the type of exported symbols sed regex in Makefile.build requires line break between exported symbols Adding asm-prototypes.h for genksyms to generate crc
-
由 Yonghong Song 提交于
With latest net-next: ==== clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -Isamples/bpf \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -Wno-unknown-warning-option \ -O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found ^~~~~~~~~~~~~~ 1 error generated. ==== net has the same issue. Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h. Also move bpf_helpers.h from samples/bpf to selftests/bpf and change compiler include logic so that programs in samples/bpf can access the headers in selftests/bpf, but not the other way around. Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eduardo Valentin 提交于
We currently get the following kmemleak report: unreferenced object 0xffff8800039d9820 (size 32): comm "softirq", pid 0, jiffies 4295212383 (age 792.416s) hex dump (first 32 bytes): 00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00 ................ 00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff ................ backtrace: [<ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0 [<ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge] [<ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge] [<ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge] [<ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge] [<ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge] [<ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge] [<ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter] [<ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter] [<ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter] [<ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter] [<ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter] [<ffffffff814a2952>] nf_iterate+0x52/0x60 [<ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0 [<ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge] This happens when switchdev_port_obj_add() fails. This patch frees complete_info object in the fail path. Reviewed-by: NVallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: NEduardo Valentin <eduval@amazon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull more block updates from Jens Axboe: "This is a followup for block changes, that didn't make the initial pull request. It's a bit of a mixed bag, this contains: - A followup pull request from Sagi for NVMe. Outside of fixups for NVMe, it also includes a series for ensuring that we properly quiesce hardware queues when browsing live tags. - Set of integrity fixes from Dmitry (mostly), fixing various issues for folks using DIF/DIX. - Fix for a bug introduced in cciss, with the req init changes. From Christoph. - Fix for a bug in BFQ, from Paolo. - Two followup fixes for lightnvm/pblk from Javier. - Depth fix from Ming for blk-mq-sched. - Also from Ming, performance fix for mtip32xx that was introduced with the dynamic initialization of commands" * 'for-linus' of git://git.kernel.dk/linux-block: (44 commits) block: call bio_uninit in bio_endio nvmet: avoid unneeded assignment of submit_bio return value nvme-pci: add module parameter for io queue depth nvme-pci: compile warnings in nvme_alloc_host_mem() nvmet_fc: Accept variable pad lengths on Create Association LS nvme_fc/nvmet_fc: revise Create Association descriptor length lightnvm: pblk: remove unnecessary checks lightnvm: pblk: control I/O flow also on tear down cciss: initialize struct scsi_req null_blk: fix error flow for shared tags during module_init block: Fix __blkdev_issue_zeroout loop nvme-rdma: unconditionally recycle the request mr nvme: split nvme_uninit_ctrl into stop and uninit virtio_blk: quiesce/unquiesce live IO when entering PM states mtip32xx: quiesce request queues to make sure no submissions are inflight nbd: quiesce request queues to make sure no submissions are inflight nvme: kick requeue list when requeueing a request instead of when starting the queues nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes and sane default from Steve French: "Upgrade default dialect to more secure SMB3 from older cifs dialect" * tag 'smb3-security-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6: cifs: Clean up unused variables in smb2pdu.c [SMB3] Improve security, move default dialect to SMB3 from old CIFS [SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred CIFS: Reconnect expired SMB sessions CIFS: Display SMB2 error codes in the hex format cifs: Use smb 2 - 3 and cifsacl mount options setacl function cifs: prototype declaration and definition to set acl for smb 2 - 3 and cifsacl mount options
-
由 WANG Cong 提交于
We are not allowed to block on the RCU reader side, so can't just hold the mutex as before. As a quick fix, convert it to a spinlock. Fixes: d9f1f61c ("tap: Extending tap device create/destroy APIs") Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-