- 22 4月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
To avoid potential data races, use a spinlock which protects the raw (on-disk) inode. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz>
-
- 21 4月, 2014 1 次提交
-
-
由 Lukas Czerner 提交于
Currently in ext4 there is quite a mess when it comes to naming unwritten extents. Sometimes we call it uninitialized and sometimes we refer to it as unwritten. The right name for the extent which has been allocated but does not contain any written data is _unwritten_. Other file systems are using this name consistently, even the buffer head state refers to it as unwritten. We need to fix this confusion in ext4. This commit changes every reference to an uninitialized extent (meaning allocated but unwritten) to unwritten extent. This includes comments, function names and variable names. It even covers abbreviation of the word uninitialized (such as uninit) and some misspellings. This commit does not change any of the code paths at all. This has been confirmed by comparing md5sums of the assembly code of each object file after all the function names were stripped from it. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 07 4月, 2014 1 次提交
-
-
由 Azat Khuzhin 提交于
With EXT4FS_DEBUG ext4_count_free_clusters() will call ext4_read_block_bitmap() without s_group_info initialized, so we need to initialize multi-block allocator before. And dependencies that must be solved, to allow this: - multi-block allocator needs in group descriptors - need to install s_op before initializing multi-block allocator, because in ext4_mb_init_backend() new inode is created. - initialize number of group desc blocks (s_gdb_count) otherwise number of clusters returned by ext4_free_clusters_after_init() is not correct. (see ext4_bg_num_gdb_nometa()) Here is the stack backtrace: (gdb) bt #0 ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430 #1 ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000, desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358 #2 0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476 #3 0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0) at balloc.c:489 #4 0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665 #5 0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>, sb=0xffff880079a10000) at super.c:2143 #6 ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>, data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851 ... Signed-off-by: NAzat Khuzhin <a3at.mail@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 25 3月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
Set a in-memory superblock flag to indicate whether the file system is designed to support the Hurd. Also, add a sanity check to make sure the 64-bit feature is not set for Hurd file systems, since i_file_acl_high conflicts with a Hurd-specific field. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 19 3月, 2014 1 次提交
-
-
由 T Makphaibulchoke 提交于
This patch adds new interfaces to create and destory cache, ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove the cache creation and destory calls from ex4_init_xattr() and ext4_exitxattr() in fs/ext4/xattr.c. fs/ext4/super.c has been changed so that when a filesystem is mounted a cache is allocated and attched to its ext4_sb_info structure. fs/mbcache.c has been changed so that only one slab allocator is allocated and used by all mbcache structures. Signed-off-by: NT. Makphaibulchoke <tmac@hp.com>
-
- 14 3月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
This is the only time it is required for ext4. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 3月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
-
- 18 2月, 2014 1 次提交
-
-
由 Fabian Frederick 提交于
init_inodecache is only called by __init init_ext4_fs. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 2月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
If an ext4 file system is created by some tool other than mke2fs (perhaps by someone who has a pathalogical fear of the GPL) that doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags, and that file system is then mounted read-only, don't try to modify the s_flags field. Otherwise, if dm_verity is in use, the superblock will change, causing an dm_verity failure. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 09 12月, 2013 2 次提交
-
-
由 Jan Kara 提交于
When the filesystem doesn't support extents (like in ext2/3 compatibility modes), there is no need to reserve any clusters. Space estimates for writing are exact, hole punching doesn't need new metadata, and there are no unwritten extents to convert. This fixes a problem when filesystem still having some free space when accessed with a native ext2/3 driver suddently reports ENOSPC when accessed with ext4 driver. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Al Viro 提交于
That thing should be del_timer_sync(); consider what happens if ext4_put_super() call of del_timer() happens to come just as it's getting run on another CPU. Since that timer reschedules itself to run next day, you are pretty much guaranteed that you'll end up with kfree'd scheduled timer, with usual fun consequences. AFAICS, that's -stable fodder all way back to 2010... [the second del_timer_sync() is almost certainly not needed, but it doesn't hurt either] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 08 11月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
Many of the uses of get_random_bytes() do not actually need cryptographically secure random numbers. Replace those uses with a call to prandom_u32(), which is faster and which doesn't consume entropy from the /dev/random driver. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 18 10月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
In the case of a storage device that suddenly disappears, or in the case of significant file system corruption, this can result in a huge flood of messages being sent to the console. This can overflow the file system containing /var/log/messages, or if a serial console is configured, this can slow down the system so much that a hardware watchdog can end up triggering forcing a system reboot. Google-Bug-Id: 7258357 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 04 9月, 2013 1 次提交
-
-
由 Christoph Hellwig 提交于
Add support to the core direct-io code to defer AIO completions to user context using a workqueue. This replaces opencoded and less efficient code in XFS and ext4 (we save a memory allocation for each direct IO) and will be needed to properly support O_(D)SYNC for AIO. The communication between the filesystem and the direct I/O code requires a new buffer head flag, which is a bit ugly but not avoidable until the direct I/O code stops abusing the buffer_head structure for communicating with the filesystems. Currently this creates a per-superblock unbound workqueue for these completions, which is taken from an earlier patch by Jan Kara. I'm not really convinced about this use and would prefer a "normal" global workqueue with a high concurrency limit, but this needs further discussion. JK: Fixed ext4 part, dynamic allocation of the workqueue. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 8月, 2013 1 次提交
-
-
由 Eric Sandeen 提交于
It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
-
- 20 8月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Don't emit OOM warnings when k.alloc calls fail when there there is a v.alloc immediately afterwards. Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 8月, 2013 2 次提交
-
-
由 Piotr Sarna 提交于
Commit 56889787 ("ext4: improve handling of conflicting mount options") introduced incorrect messages shown while choosing wrong mount options. First of all, both cases of incorrect mount options, "data=journal,delalloc" and "data=journal,dioread_nolock" result in the same error message. Secondly, the problem above isn't solved for remount option: the mismatched parameter is simply ignored. Moreover, ext4_msg states that remount with options "data=journal,delalloc" succeeded, which is not true. To fix it up, I added a simple check after parse_options() call to ensure that data=journal and delalloc/dioread_nolock parameters are not present at the same time. Signed-off-by: NPiotr Sarna <p.sarna@partner.samsung.com> Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
Commit 26092bf5 ("ext4: use a table-driven handler for mount options") wrongly disallows the specifying the mount options nodelalloc and data=journal simultaneously. This is incorrect; it should have only disallowed the combination of delalloc and data=journal simultaneously. Reported-by: NPiotr Sarna <p.sarna@partner.samsung.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 27 7月, 2013 1 次提交
-
-
由 Eric Sandeen 提交于
Without this, module can't be reloaded. [ 500.521980] kmem_cache_sanity_check (ext4_extent_status): Cache name already exists. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # v3.8+
-
- 12 7月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
We now print mount options in a generic fashion in ext4_show_options(), so we shouldn't be explicitly printing the {usr,grp}quota options in ext4_show_quota_options(). Without this patch, /proc/mounts can look like this: /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0 ^^^^^^^^ ^^^^^^^^ Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 06 7月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
The function ext4_get_group_number() was introduced as an optimization in commit bd86298e. Unfortunately, this commit incorrectly calculate the group number for file systems with a 1k block size (when s_first_data_block is 1 instead of zero). This could cause the following kernel BUG: [ 568.877799] ------------[ cut here ]------------ [ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728! [ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1] [ 568.877845] SMP NR_CPUS=32 NUMA pSeries [ 568.877852] Modules linked in: binfmt_misc [ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809ff-dirty #1 [ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000 [ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8 [ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809ff-dirty) [ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000 [ 568.877902] SOFTE: 1 [ 568.877905] CFAR: c0000000002b5464 [ 568.877908] GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000 GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000 GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0 GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672 GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000 GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288 GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10 [ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0 [ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 [ 568.878004] Call Trace: [ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable) [ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444 [ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734 [ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4 [ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178 [ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490 [ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60 [ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80 [ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0 [ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc [ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4 [ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80 [ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c [ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90 [ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c [ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c [ 568.878125] Instruction dump: [ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70 [ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78 [ 568.878160] ---[ end trace 594d911d9654770b ]--- In addition fix the STD_GROUP optimization so that it works for bigalloc file systems as well. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reported-by: NLi Zhong <lizhongfs@gmail.com> Reviewed-by: NLukas Czerner <lczerner@redhat.com> Cc: stable@vger.kernel.org # 3.10
-
- 01 7月, 2013 2 次提交
-
-
由 Joe Perches 提交于
Reduce the object size ~10% could be useful for embedded systems. Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and arguments, passing " " to functions when !CONFIG_PRINTK and still verifying format and arguments with no_printk. $ size fs/ext4/built-in.o* text data bss dec hex filename 239375 610 888 240873 3ace9 fs/ext4/built-in.o.new 264167 738 888 265793 40e41 fs/ext4/built-in.o.old $ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config # CONFIG_PRINTK is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y CONFIG_EXT4_FS_POSIX_ACL=y # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Zheng Liu 提交于
Now we maintain an proper in-order LRU list in ext4 to reclaim entries from extent status tree when we are under heavy memory pressure. For keeping this order, a spin lock is used to protect this list. But this lock burns a lot of CPU time. We can use the following steps to trigger it. % cd /dev/shm % dd if=/dev/zero of=ext4-img bs=1M count=2k % mkfs.ext4 ext4-img % mount -t ext4 -o loop ext4-img /mnt % cd /mnt % for ((i=0;i<160;i++)); do truncate -s 64g $i; done % for ((i=0;i<160;i++)); do cp $i /dev/null &; done % perf record -a -g % perf report This commit tries to fix this problem. Now a new member called i_touch_when is added into ext4_inode_info to record the last access time for an inode. Meanwhile we never need to keep a proper in-order LRU list. So this can avoid to burns some CPU time. When we try to reclaim some entries from extent status tree, we use list_sort() to get a proper in-order list. Then we traverse this list to discard some entries. In ext4_sb_info, we use s_es_last_sorted to record the last time of sorting this list. When we traverse the list, we skip the inode that is newer than this time, and move this inode to the tail of LRU list. When the head of the list is newer than s_es_last_sorted, we will sort the LRU list again. In this commit, we break the loop if s_extent_cache_cnt == 0 because that means that all extents in extent status tree have been reclaimed. Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is changed to save a local variable in these functions. Reported-by: NDave Hansen <dave.hansen@intel.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 6月, 2013 1 次提交
-
-
由 Jon Ernst 提交于
This patch removed several unused variables. Signed-off-by: NJon Ernst <jonernst07@gmx.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 6月, 2013 2 次提交
-
-
由 Dmitry Monakhov 提交于
If filesystem was aborted after inode's write back is complete but before its metadata was updated we may return success results in data loss. In order to handle fs abort correctly we have to check fs state once we discover that it is in MS_RDONLY state Test case: http://patchwork.ozlabs.org/patch/244297Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Dmitry Monakhov 提交于
Inode's data or non journaled quota may be written w/o jounral so we _must_ send a barrier at the end of ext4_sync_fs. But it can be skipped if journal commit will do it for us. Also fix data integrity for nojournal mode. Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 05 6月, 2013 2 次提交
-
-
由 Jan Kara 提交于
Now that we have extent conversions with reserved transaction, we have to prevent extent conversions without reserved transaction (from DIO code) to block these (as that would effectively void any transaction reservation we did). So split lists, work items, and work queues to reserved and unreserved parts. Reviewed-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jan Kara 提交于
This attribute is now unused so deprecate it. We still show the old default value to keep some compatibility but we don't allow writing to that attribute anymore. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 5月, 2013 2 次提交
-
-
由 Paul Taysom 提交于
Suppress the messages releating to processing the ext4 orphan list ("truncating inode" and "deleting unreferenced inode") unless the debug option is on, since otherwise they end up taking up space in the log that could be used for more useful information. Tested by opening several files, unlinking them, then crashing the system, rebooting the system and examining /var/log/messages. Addresses the problem described in http://crbug.com/220976Signed-off-by: NPaul Taysom <taysom@chromium.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Lukas Czerner 提交于
Currently we do not tell mm to zero out tail of the page before truncate in orphan_cleanup(). This is ok, because the page should not be uptodate, however this may eventually change and I might cause problems. Call truncate_inode_pages() as precautionary measure. Thanks Jan Kara for pointing this out. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 07 5月, 2013 1 次提交
-
-
由 Al Viro 提交于
same story as with the previous patches - note that return value of blkdev_close() is lost, since there's nowhere the caller (__fput()) could return it to. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 4月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's important that metadata I/O requests are marked as such to avoid priority inversions caused by I/O bandwidth throttling. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 12 4月, 2013 1 次提交
-
-
由 Lukas Czerner 提交于
In parse_strtoul() we're still using deprecated simple_strtoul(). Remove parse_strtoul() altogether and replace it with kstrtoul() Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 10 4月, 2013 3 次提交
-
-
由 Theodore Ts'o 提交于
None of these result in any bug, but they makes sparse complain. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Lukas Czerner 提交于
Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
-
由 Al Viro 提交于
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 4月, 2013 1 次提交
-
-
由 Jan Kara 提交于
We didn't mark hidden quota files with S_NOQUOTA flag and thus quota was accounted even for quota files. Thus we could recurse back to quota code when adding new blocks to quota file which can easily deadlock. Mark hidden quota files properly. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 04 4月, 2013 3 次提交
-
-
由 Lukas Czerner 提交于
Currently in when getting the block group number for a particular block in ext4_block_in_group() we're using ext4_get_group_no_and_offset() which uses do_div() to get the block group and the remainer which is offset within the group. We don't need all of that in ext4_block_in_group() as we only need to figure out the group number. This commit changes ext4_block_in_group() to calculate group number directly. This shows as a big improvement with regards to cpu utilization. Measuring fallocate -l 15T on fresh file system with perf showed that 23% of cpu time was spend in the ext4_get_group_no_and_offset(). With this change it completely disappears from the list only bumping the occurrence of ext4_init_block_bitmap() which is the biggest user of ext4_block_in_group() by 4%. As the result of this change on my system the fallocate call was approx. 10% faster. However since there is '-g' option in mkfs which allow us setting different groups size (mostly for developers) I've introduced new per file system flag whether we have a standard block group size or not. The flag is used to determine whether we can use the bit shift optimization or not. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Dmitry Monakhov 提交于
Otherwise destroyed ext_sb_info will be part of global shinker list and result in the following OOPS: JBD2: corrupted journal superblock JBD2: recovery failed EXT4-fs (dm-2): error loading journal general protection fault: 0000 [#1] SMP Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\ mod CPU 1 Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136 /DH55TC RIP: 0010:[<ffffffff811bfb2d>] [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP: 0000:ffff88011d5cbcd8 EFLAGS: 00010207 RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848 R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000 FS: 00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80) Stack: ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1 00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000 ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000 Call Trace: [<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0 [<ffffffff81249381>] mount_bdev+0x331/0x340 [<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180 [<ffffffff81362035>] ext4_mount+0x15/0x20 [<ffffffff8124869a>] mount_fs+0x9a/0x2e0 [<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170 [<ffffffff81279c02>] do_new_mount+0x172/0x2e0 [<ffffffff8127aa56>] do_mount+0x376/0x380 [<ffffffff8127ab98>] sys_mount+0x138/0x150 [<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\ 8 RIP [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP <ffff88011d5cbcd8> Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Dmitry Monakhov 提交于
It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
-