Remove some unnecessary blank lines to accord with Kernel's coding style.
Also remove vcpu_get_itir_on_fault due to no reference to it.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove the remaining arch fragments of the old guest debug interface
that now break non-x86 builds.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required
for live migrations.

Patch is based on previous implementation that was part of old
GET/SET_REGS ioctl calls.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add the remaining bits to make use of debug registers also for guest
debugging, thus enabling the use of hardware breakpoints and
watchpoints.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

So far KVM only had basic x86 debug register support, once introduced to
realize guest debugging that way. The guest itself was not able to use
those registers.

This patch now adds (almost) full support for guest self-debugging via
hardware registers. It refactors the code, moving generic parts out of
SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and
it ensures that the registers are properly switched between host and
guest.

This patch also prepares debug register usage by the host. The latter
will (once wired-up by the following patch) allow for hardware
breakpoints/watchpoints in guest code. If this is enabled, the guest
will only see faked debug registers without functionality, but with
content reflecting the guest's modifications.

Tested on Intel only, but SVM /should/ work as well, but who knows...

Known limitations: Trapping on tss switch won't work - most probably on
Intel.

Credits also go to Joerg Roedel - I used his once posted debugging
series as platform for this patch.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When single-stepping over STI and MOV SS, we must clear the
corresponding interruptibility bits in the guest state. Otherwise
vmentry fails as it then expects bit 14 (BS) in pending debug exceptions
being set, but that's not correct for the guest debugging case.

Note that clearing those bits is safe as we check for interruptibility
based on the original state and do not inject interrupts or NMIs if
guest interruptibility was blocked.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.

To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.

The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.

Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

VMX differentiates between processor and software generated exceptions
when injecting them into the guest. Extend vmx_queue_exception
accordingly (and refactor related constants) so that we can use this
service reliably for the new guest debugging framework.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Userspace has to tell the kernel module somehow that nested SVM should be used.
The easiest way that doesn't break anything I could think of is to implement

if (cpuid & svm)
    allow write to efer
else
    deny write to efer

Old userspaces mask the SVM capability bit, so they don't break.
In order to find out that the SVM capability is set, I had to split the
kvm_emulate_cpuid into a finding and an emulating part.

(introduced in v6)
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Normally setting the SVME bit in EFER is not allowed, as we did
not support SVM. Not since we do, we should also allow enabling
SVM mode.

v2 comes as last patch, so we don't enable half-ready code
v4 introduces a module option to enable SVM
v6 warns that nesting is enabled
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM tries to read the VM_CR MSR to find out if SVM was disabled by
the BIOS. So implement read support for this MSR to make nested
SVM running.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This adds the #VMEXIT intercept, so we return to the level 1 guest
when something happens in the level 2 guest that should return to
the level 1 guest.

v2 implements HIF handling and cleans up exception interception
v3 adds support for V_INTR_MASKING_MASK
v4 uses the host page hsave
v5 removes IOPM merging code
v6 moves mmu code out of the atomic section
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch implements VMRUN. VMRUN enters a virtual CPU and runs that
in the same context as the normal guest CPU would run.
So basically it is implemented the same way, a normal CPU would do it.

We also prepare all intercepts that get OR'ed with the original
intercepts, as we do not allow a level 2 guest to be intercepted less
than the first level guest.

v2 implements the following improvements:

- fixes the CPL check
- does not allocate iopm when not used
- remembers the host's IF in the HIF bit in the hflags

v3:

- make use of the new permission checking
- add support for V_INTR_MASKING_MASK

v4:

- use host page backed hsave

v5:

- remove IOPM merging code

v6:

- save cr4 so PAE l1 guests work

v7:

- return 0 on vmrun so we check the MSRs too
- fix MSR check to use the correct variable
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This implements the VMLOAD and VMSAVE instructions, that usually surround
the VMRUN instructions. Both instructions load / restore the same elements,
so we only need to implement them once.

v2 fixes CPL checking and replaces memcpy by assignments
v3 makes use of the new permission checking
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Implement the hsave MSR, that gives the VCPU a GPA to save the
old guest state in.

v2 allows userspace to save/restore hsave
v4 dummys out the hsave MSR, so we use a host page
v6 remembers the guest's hsave and exports the MSR
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch implements the GIF flag and the clgi and stgi instructions that
set this flag. Only if the flag is set (default), interrupts can be received by
the CPU.

To keep the information about that somewhere, this patch adds a new hidden
flags vector. that is used to store information that does not go into the
vmcb, but is SVM specific.

I tried to write some code to make -no-kvm-irqchip work too, but the first
level guest won't even boot with that atm, so I ditched it.

v2 moves the hflags to x86 generic code
v3 makes use of the new permission helper
v6 only enables interrupt_window if GIF=1
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

These are helpers for the nested SVM implementation.

- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory

v3 makes use of the new permission checker
v6 changes:
- streamline nsvm_debug()
- remove printk(KERN_ERR)
- SVME check before CPL check
- give GP error code
- use new EFER constant
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM
specific headers. Linux does have nice header files to collect
EFER bits and MSR IDs, so IMHO we should put them there.

While at it, I also changed the naming scheme to match that
of the other defines.

(introduced in v6)
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The current VINTR intercept setters don't look clean to me. To make
the code easier to read and enable the possibilty to trap on a VINTR
set, this uses a helper function to set the VINTR intercept.

v2 uses two distinct functions for setting and clearing the bit
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic
ppc32 SW" (commit a4bd6a93)

It was missing the code to actually deal with the fixup of
_PAGE_COHERENT based on the CPU feature.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

When you compile kernel on Sparc64 with heap memory checking and type
"cat /proc/iomem", you get a crash, because pointers in struct
resource are uninitialized.

Most code fills struct resource with zeros, so I assume that it is
responsibility of the caller of request_resource to initialized it,
not the responsibility of request_resource functuion.

After 2.6.29 is out, there could be a check for uninitialized fields
added to request_resource to avoid crashes like this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise it might interrupt switch_to() midstream and use
half-cooked register window state.
Reported-by: NChris Torek <chris.torek@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After TASK_SIZE now gives the current size of the address space the
upgrade of a 64 bit process from 3 to 4 levels of page table  needs
to use the arch_mmap_check hook to catch large mmap lengths. The
get_unmapped_area* functions need to check for -ENOMEM from the
arch_get_unmapped_area*, upgrade the page table and retry.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make page table walking on s390 more robust. The current code requires
that the pgd/pud/pmd/pte loop is only done for address ranges that are
below the end address of the last vma of the address space. But this
is not always true, e.g. the generic page table walker does not guarantee
this. Change TASK_SIZE/TASK_SIZE_OF to reflect the current size of the
address space. This makes the generic page table walker happy but it
breaks the upgrade of a 3 level page table to a 4 level page table.
To make the upgrade work again another fix is required.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

pfn_valid() actually checks for a valid struct page and not for a
valid pfn. Using xip mappings w/o struct pages, this will result in
-EFAULT returned by the (page table walk) user copy functions,
even though there is valid memory. Those user copy functions don't
need a struct page, so this patch just removes the pfn_valid() check.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

With packed stack the backchain is at a different location.
Just use __SF_BACKCHAIN as an offset to store the backchain.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The default values for SD_MC_INIT cause an additional cpu usage of up
to 40% on some network benchmarks compared to the plain SD_CPU_INIT
values. So just define SD_MC_INIT to SD_CPU_INIT.
More tuning needs to be done.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The implementation of __div64_31 for G5 machines is broken. The comments
in __div64_31 are correct, only the code does not do what the comments
say. The part "If the remainder has overflown subtract base and increase
the quotient" is only partially realized, the base is subtracted correctly
but the quotient is only increased if the dividend had the last bit set.
Using the correct instruction fixes the problem.

Cc: stable@kernel.org
Reported-by: NFrans Pop <elendil@planet.nl>
Tested-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Update ps3_defconfig.

Sets these options:

  CONFIG_PS3_VRAM=m
  CONFIG_BLK_DEV_DM=m
  CONFIG_USB_HIDDEV=y
  CONFIG_EXT4_FS=y
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Don't boost at the addresses which are listed on exception tables,
because major page fault will occur on those addresses.  In that case,
kprobes can not ensure that when instruction buffer can be freed since
some processes will sleep on the buffer.

kprobes-ia64 already has same check.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since we now set _PAGE_COHERENT in the Linux PTE we shouldn't be clearing
it out before we setup the SW TLB.  Today all the SW TLB machines
(603/e300) that we support are non-SMP, however there are some errata on
some devices that cause us to set _PAGE_COHERENT via CPU_FTR_NEED_COHERENT.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

BestComm, a DMA engine in MPC52xx SoC, requires snooping when
CPU caches are enabled to work properly.

Adding CPU_FTR_NEED_COHERENT fixes NFS problems on MPC52xx machines
introduced by 'powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup
code' (sha1: 4c456a67).
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

In order for ntpd to correctly synchronize the clocks, the frequency of
the system clock must not be off by more than 500 ppm (or, put another
way, 1:2000), or ntpd will end up giving up on trying to synchronize
properly, and ends up reseting the clock in jumps instead.

The fast TSC PIT calibration sometimes failed this test - it was
assuming that the PIT reads always took about one microsecond each (2us
for the two reads to get a 16-bit timer), and that calibrating TSC to
the PIT over 15ms should thus be sufficient to get much closer than
500ppm (max 2us error on both sides giving 4us over 15ms: a 270 ppm
error value).

However, that assumption does not always hold: apparently some hardware
is either very much slower at reading the PIT registers, or there was
other noise causing at least one machine to get 700+ ppm errors.

So instead of using a fixed 15ms timing loop, this changes the fast PIT
calibration to read the TSC delta over the individual PIT timer reads,
and use the result to calculate the error bars on the PIT read timing
properly.  We then successfully calibrate the TSC only if the maximum
error bars fall below 500ppm.

In the process, we also relax the timing to allow up to 25ms for the
calibration, although it can happen much faster depending on hardware.
Reported-and-tested-by: NJesper Krogh <jesper@krogh.cc>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During bootup, when we reprogram the PIT (programmable interval timer)
to start counting down from 0xffff in order to use it for the fast TSC
calibration, we should also make sure to delay a bit afterwards to allow
the PIT hardware to actually start counting with the new value.

That will happens at the next CLK pulse (1.193182 MHz), so the easiest
way to do that is to just wait at least one microsecond after
programming the new PIT counter value.  We do that by just reading the
counter value back once - which will take about 2us on PC hardware.
Reported-and-tested-by: Njohn stultz <johnstul@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is trivial to merge the non-MMU and MMU versions of siginfo.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of siginfo.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The MMU version of unistd.h can be use on non-MMU platrorms as well.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of unistd.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

It is trivial to merge the non-MMU and MMU versions of signal.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of signal.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

It is trivial to merge the non-MMU and MMU versions of ptrace.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of ptrace.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The MMU version of setup.h can be used for all m68k platforms.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of setup.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

It is trivial to merge the non-MMU and MMU versions of sigcontext.h.
Without a single file "make headers_install" is broken for m68k
(since each of the sub-varients of sigconext.h are not installed).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>