提交 · 22cbba1b82de458028f4aa270e88492b622c1ea8 · openanolis / cloud-kernel

03 2月, 2011 2 次提交

ARM: mxs: dynamically register flexcan devices for mx28 · 22cbba1b

由 Marc Kleine-Budde 提交于 2月 02, 2011

Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

22cbba1b

ARM: mxs: adjust flexcan clock definition · 6ea038a7

由 Marc Kleine-Budde 提交于 2月 02, 2011

Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

6ea038a7

01 2月, 2011 6 次提交

ARM: mx5/board-mx53_evk.c: Make UART1 functional · df42c8a7

由 Fabio Estevam 提交于 1月 31, 2011

Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

df42c8a7

ARM: mx5/board-mx53_smd.c: Make UART1 functional · cdb2daa4

由 Fabio Estevam 提交于 1月 31, 2011

Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

cdb2daa4

ARM: mach-mx5/board-mx53_loco: Remove unused UARTs · abc1813d

由 Fabio Estevam 提交于 1月 25, 2011

On mx53_loco only UART1 is used and its signals go to connector J16.

Remove UART2 and UART3 as they are not used on this board.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

abc1813d

ARM: mach-mx5/board-mx53_loco: Make UART1 functional · 528f6527

由 Fabio Estevam 提交于 1月 25, 2011

Fix IOMUX settings for UART1 and make UART1 functional.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

528f6527

ARM: mach-mx5: Fix build for mx53_loco and mx53_smd · 67f2a87f

由 Fabio Estevam 提交于 1月 25, 2011

Commit 816ad741 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names.

Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

67f2a87f

plat-mxc: Provide irq_chip name for GPIO IRQs · 039c4644

由 Alexander Stein 提交于 1月 31, 2011

Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

039c4644

31 1月, 2011 1 次提交
- S
  
  Merge branch 'imx-board-ifdefs' into imx-for-2.6.39 · bf9f6c8f
  由 Sascha Hauer 提交于 1月 31, 2011
  
  bf9f6c8f
28 1月, 2011 5 次提交

F
ARM: mach-mx3/mach-mx31_3ds: Remove unnecessary function for IO mapping · 4404117d
由 Fabio Estevam 提交于 1月 27, 2011
```
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
4404117d

ARM i.MX28: remove reserved register defines · 44b4ca32

由 Sascha Hauer 提交于 1月 27, 2011

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

44b4ca32

ARM i.MX23: remove reserved register defines · d69934bc

由 Sascha Hauer 提交于 1月 24, 2011

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

d69934bc

ARM i.MX23/28: do not use complicated macros if not necessary · 0e8b462d

由 Sascha Hauer 提交于 1月 24, 2011

Get rid of ## preprocessor construct where it only makes the
code harder to read.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

0e8b462d

ARM i.MX23/28: deobfuscate gpio initialization · ef19660b

由 Sascha Hauer 提交于 1月 24, 2011

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

ef19660b

27 1月, 2011 13 次提交
- S
  ARM i.MX51 efikamx: remove unnecessary CONFIG_SERIAL_IMX ifdefs · 53cdd306
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  53cdd306
- S
  ARM i.MX51 cpuimx51: remove unnecessary CONFIG_SERIAL_8250 ifdefs · 7f16f817
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  7f16f817
- S
  ARM i.MX51 mx51-3ds: remove unnecessary CONFIG_KEYBOARD_IMX ifdefs · 818956e0
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  818956e0
- S
  ARM i.MX51 mx51 babbage: remove unnecessary CONFIG_SERIAL_IMX ifdefs · 27d2d62b
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  27d2d62b
- S
  ARM i.MX51 mx51 3ds: remove unnecessary CONFIG_SERIAL_IMX ifdefs · 0c1c8511
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  0c1c8511
- S
  ARM i.MX31 pcm037 eet: remove unnecessary CONFIG_SPI_IMX ifdefs · b49a2a69
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  b49a2a69
- S
  ARM i.MX27 eukrea mbimx27: remove unnecessary CONFIG_SPI_IMX ifdefs · 285faa1b
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  285faa1b
- S
  ARM i.MX27 pca100: remove unnecessary CONFIG_SPI_IMX ifdefs · 5ec561af
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  5ec561af
- S
  ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_8250 ifdefs · 9f43e44b
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  9f43e44b
- S
  ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_IMX ifdefs · 889faeaa
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  889faeaa
- S
  ARM i.MX31 mx31ads: remove unnecessary CONFIG_I2C ifdefs · afc11e6e
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  afc11e6e
- S
  ARM i.MX35 pcm043: put usbh1 outside CONFIG_USB_ULPI · 070ed733
  由 Sascha Hauer 提交于 1月 14, 2011
```
The usbh1 port of the pcm043 does not use ulpi, so put it outside
the corresponding ifdefs.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  070ed733
- S
  ARM i.MX35 pcm043: remove unnecessary CONFIG_I2C ifdefs · 0fbfd987
  由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  0fbfd987
26 1月, 2011 1 次提交

ARM: mxs: add initial pm support · 376e9c58

由 Shawn Guo 提交于 1月 24, 2011

This is a very initial pm support and basically does nothing.
With this pm support entry, drivers can start testing their own
pm functions.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

376e9c58

25 1月, 2011 3 次提交
- S
  ARM MXS: Add auart platform support for i.MX28 · cf3567aa
  由 Sascha Hauer 提交于 1月 11, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  cf3567aa
- S
  serial: Add auart driver for i.MX23/28 · 47d37d6f
  由 Sascha Hauer 提交于 1月 11, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  47d37d6f
- F
  ARM: imx: Add initial support for IMX27IPCAM board · 9c2c3584
  由 Fabio Estevam 提交于 1月 24, 2011
```
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
  9c2c3584
24 1月, 2011 1 次提交

ARM: mx5/mx51_3ds: Add watchdog support · 56f94b1e

由 Daiane Angolini 提交于 12月 09, 2010

Signed-off-by: NDaiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

56f94b1e

21 1月, 2011 4 次提交

ARM: mxs/mx28evk: read fec mac address from ocotp · a320b279

由 Shawn Guo 提交于 1月 14, 2011

Read fec mac address from ocotp and save it into fec_platform_data
mac field for fec driver to use.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a320b279

ARM: mxs: add ocotp read function · 67f43086

由 Shawn Guo 提交于 1月 14, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

67f43086

ARM: mx5: Use dummy clock for the keypad · bb58b3e8

由 Fabio Estevam 提交于 1月 19, 2011

Reuse dummy_clk for the imx-keypad device instead of using a dedicated kpp_clk.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

bb58b3e8

ARM: i.MX53: Add full iomux support for mx53 · 816ad741

由 Dinh Nguyen 提交于 1月 15, 2011

This iomux file contains all the available pins that are iomux
capable.
Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

816ad741

19 1月, 2011 4 次提交

Introduce VPR200 board. · 00c89c1d

由 Marc Reilly 提交于 1月 15, 2011

Signed-off-by: NMarc Reilly <marc@cpdesign.com.au>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

00c89c1d

arm: mx50_rdp: add i2c bus support · 98b7d550

由 Richard Zhao 提交于 1月 14, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

98b7d550

arm: mx50_rdp: add fec support · 82c520dc

由 Richard Zhao 提交于 1月 14, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

82c520dc

ARM i.MX50: Rename devices-mx50.h · a929dcf7

由 Jason Liu 提交于 1月 11, 2011

There are devices-imx51.h and devices-imx53.h under
arch/arm/mach-mx5 directory. So, had better rename
devices-mx50.h to devices-imx50.h to follow the same
naming convention with imx51 and imx53 part.
Signed-off-by: NJason Liu <r64343@freescale.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a929dcf7

openanolis / cloud-kernel 大约 1 年 前同步成功

openanolis / cloud-kernel
大约 1 年前同步成功