Calls to trace incoming packets will now receive the packet
context as parameter. This enables trace support for future
packet types.

Header trace output is in the format <field>:<value>
which makes parsing easier.

input_ibhdr trace before change:
<idle>-0     [001] d.h.  5904.250925: input_ibhdr: [0000:05:00.0] vl 0
lver 0 sl 0 lnh 2,LRH_BTH dlid 0002 len 18 slid 0001 op
0x64,UD_SEND_ONLY se 0 m 0 pad 0 tver 0 pkey 0xffff f 0 b 0 qpn 0x000001
a 0 psn 0x000001b2 deth qkey 0x80010000 sqpn 0x000001

input_ibhdr trace after change:
<idle>-0     [001] d.h.  6655.714488: input_ibhdr: [0000:05:00.0] (IB)
len:124 sc:0 dlid:0x0001 slid:0x0002 lnh:2,LRH_BTH lver:0 sl:0  age:0
becn:0 fecn:0 l4:0 rc:0 entropy:0 op:0x64,UD_SEND_ONLY se:0 m:0 pad:0
tver:0 pkey:0x7fff f:0 b:0 qpn:0x000001 a:0 psn:0x00000036 hlen:8 deth
qkey:0x80010000 sqpn:0x000001
Reviewed-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Improve code readablity by adding inline functions
to read specific BTH/IB fields without knowledge of
byte offsets.
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Reviewed-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Leftover function that is not used. Remove it.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The tx request is unnecessarily initialized in the hot
code path with memset(), however, there's no need to do
this as most fields are initialized later on. this
initialization shows to be costly in the profile.
Remove unnecessary initialization from tx request and make
sure all variables are initialized properly.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix memory leaks of iw_cxgb4 module in the exit path
Signed-off-by: NRaju Rangoju <rajur@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The flow of creating a new child goes through ipoib_vlan_add
which allocates a new interface and checks the rtnl_lock.

If the lock is taken, restart_syscall will be called to restart
the system call again. In this case we are not releasing the
already allocated interface, causing a leak.

Fixes: 9baa0b03 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is no need to re-enable napi since we set the initialized
flag before calling ipoib_ib_dev_stop which will disable napi,
disabling napi twice is harmless in case it was already disabled.

One more reason for this fix is that when using IPoIB new device
driver napi is not added to priv, this can lead to kernel panic
when rn_ops ndo_open fails.

[ 289.755840] invalid opcode: 0000 [#1] SMP
[ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000
[ 289.757111] RIP: 0010:[<ffffffffa05368d6>] [<ffffffffa05368d6>] napi_enable.part.24+0x4/0x6 [ib_ipoib]
[ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246
[ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff
[ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010
[ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283
[ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000
[ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001
[ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0
[ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 289.757111] Stack:
[ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718
[ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000
[ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60
[ 289.796027] Call Trace:
[ 289.796027] [<ffffffffa05251f5>] napi_enable+0x25/0x30 [ib_ipoib]
[ 289.796027] [<ffffffffa0528505>] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib]
[ 289.796027] [<ffffffffa051f0ab>] ipoib_open+0x4b/0x160 [ib_ipoib]
[ 289.796027] [<ffffffff814fe33f>] _dev_open+0xbf/0x130
[ 289.796027] [<ffffffff814fe62d>] __dev_change_flags+0x9d/0x170
[ 289.796027] [<ffffffff814fe729>] dev_change_flags+0x29/0x60
[ 289.796027] [<ffffffff8150caf7>] do_setlink+0x397/0xa40

Fixes: cd565b4b ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch mekas init_default and uninit_default symmetric
with a call to delete napi. Additionally, the uninit_default
gained delete napi call in case of init_default fails.

Fixes: 515ed4f3 ('IB/IPoIB: Separate control and data related initializations')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Limit calls to free_rdma_netdev() for capable devices only.

Fixes: cd565b4b ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is a need to free priv explicitly and not just to release
the device, child priv is freed explicitly on remove flow and this
patch also includes priv free on error flow in P_key creation
and also in add_port.

Fixes: cd565b4b ('IB/IPoIB: Support acceleration options callbacks')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver may sleep under a spin lock, and the function call path is:
post_one_send (acquire the lock by spin_lock_irqsave)
  init_send_wqe
    copy_from_user --> may sleep

There is no flow that makes "qp->is_user" true, and copy_from_user may
cause bug when a non-user pointer is used. So the lines of copy_from_user
and check of "qp->is_user" are removed.
Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues.
De-facto it means that code was added to translate 64KB
pages to smaller 4KB pages that the FW can handle. Otherwise,
the FW would wrap (or jump to the next page)  when reaching 4KB
while the user space library will continue on the same large page.

Note that MR code remains as is since the FW supports larger pages
for MRs.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Initialize byte_len in work completion of RDMA_READ and RDMA_SEND.
Exposed by uDAPL application.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some issues observed with FMR implementation
while running stress traffic. So removing the
FMR verbs support for now.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds code to ring RQ Doorbell aggressively
so that the adapter can DMA RQ buffers sooner, instead
of DMA all WQEs in the post_recv WR list together at the
end of the post_recv verb.
Also use spinlock to serialize RQ posting
Signed-off-by: NKalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

HW stalls out after 0x800000 WQEs are posted for UD QPs.
To workaround this problem, driver will send a modify_qp cmd
to the HW at around the halfway mark(0x400000) so that FW
can accordingly modify the QP context in the HW to prevent this
stall.
This workaround needs to be done for UD, QP1 and Raw Ethertype
packets. Added a counter to keep track of WQEs posted during post_send.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the host buffers are freed before destroying MR in HW,
HW could try accessing these buffers. This could cause a host
crash. Fixing the code to avoid this condition.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch implements the following HW workarounds

1. The SQ depth needs to be augmented  by 128 + 1 to avoid running
   into an Out of order CQE issue
2. Workaround to handle the problem where the HW fast path engine continues
   to access DMA memory in retranmission mode even after the WQE has
   already been completed. If the HW reports this condition, driver detects
   it and posts a Fence WQE. The driver stops reporting the completions
   to stack until it receives completion  for Fence WQE.
Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fixing a concurrency issue with creq handling. Each caller
was given a globally managed crsq element, which was
accessed outside a lock. This could result in corruption,
if lot of applications are simultaneously issuing Control Path
commands. Now, each caller will provide its own response buffer
and the responses will be copied under a lock.
Also, Fixing the queue full condition check for the CMDQ.

As a part of these changes, the control path code is refactored
to remove the code replication in the response status checking.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

LL2 today is interrupt driven - when tx/rx completion arrives [or any
other indication], qed needs to operate on the connection and pass
the information to the protocol-driver [or internal qed consumer].
Since we have several flavors of ll2 employeed by the driver,
each handler needs to do an if-else to determine the right functionality
to use based on the connection type.

In order to make things more scalable [given that we're going to add
additional types of ll2 flavors] move the infrastrucutre into using
a callback-based approach - the callbacks would be provided as part
of the connection's initialization parameters.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to move some TCP sysctls to net namespaces in the future.

tcp_window_scaling, tcp_sack and tcp_timestamps being fetched
from tcp_parse_options(), we need to pass an extra parameter.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On sparc, if we have an alloca() like situation, as is the case with
SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack
memory.  The result can be that the value is clobbered if a trap
or interrupt arrives at just the right instruction.

It only occurs if the function ends returning a value from that
alloca() area and that value can be placed into the return value
register using a single instruction.

For example, in lib/libcrc32c.c:crc32c() we end up with a return
sequence like:

        return  %i7+8
         lduw   [%o5+16], %o0   ! MEM[(u32 *)__shash_desc.1_10 + 16B],

%o5 holds the base of the on-stack area allocated for the shash
descriptor.  But the return released the stack frame and the
register window.

So if an intererupt arrives between 'return' and 'lduw', then
the value read at %o5+16 can be corrupted.

Add a data compiler barrier to work around this problem.  This is
exactly what the gcc fix will end up doing as well, and it absolutely
should not change the code generated for other cpus (unless gcc
on them has the same bug :-)

With crucial insight from Eric Sandeen.

Cc: <stable@vger.kernel.org>
Reported-by: NAnatoly Pugachev <matorola@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove date and bump version for mlx4_ib driver.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the adapter consumes two tids for every ipv6 offload
connection be it active or passive, calculate tid usage
count accordingly.

Also change the signatures of relevant functions to get
the address family.
Signed-off-by: NRizwan Ansari <rizwana@chelsio.com>
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit eea40b8f ("infiniband: call ipv6 route lookup via the stub
interface") introduced a regression in address resolution when connecting
to IPv6 destination addresses.  The old code called ip6_route_output(),
while the new code calls ipv6_stub->ipv6_dst_lookup().  The two are almost
the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr()
if the source address is in6addr_any.

This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds,
and so we never copy the source address out.  This ends up causing
rdma_resolve_addr() to fail, because without a resolved source address,
cma_acquire_dev() will fail to find an RDMA device to use.  For me, this
causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail.

Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original
source address passed into addr6_resolve().  We can drop our call to
ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work.

Fixes: eea40b8f ("infiniband: call ipv6 route lookup via the stub interface")
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Commit 9fdca4da (IB/SA: Split struct sa_path_rec based on IB and
ROCE specific fields) moved the service_id to be specific attribute
for IB and OPA SA Path Record, and thus wasn't assigned for RoCE.

This caused to the following kernel panic in the CMA request handler flow:

[   27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[   27.074731] IP: __radix_tree_lookup+0x1d/0xe0
...
[   27.075356] Workqueue: ib_cm cm_work_handler [ib_cm]
[   27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000
[   27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0
...
[   27.075979] Call Trace:
[   27.076015]  radix_tree_lookup+0xd/0x10
[   27.076055]  cma_ps_find+0x59/0x70 [rdma_cm]
[   27.076097]  cma_id_from_event+0xd2/0x470 [rdma_cm]
[   27.076144]  ? ib_init_ah_from_path+0x39a/0x590 [ib_core]
[   27.076193]  cma_req_handler+0x25/0x480 [rdma_cm]
[   27.076237]  cm_process_work+0x25/0x120 [ib_cm]
[   27.076280]  ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm]
[   27.076350]  cm_req_handler+0xb03/0xd40 [ib_cm]
[   27.076430]  ? sched_clock_cpu+0x11/0xb0
[   27.076478]  cm_work_handler+0x194/0x1588 [ib_cm]
[   27.076525]  process_one_work+0x160/0x410
[   27.076565]  worker_thread+0x137/0x4a0
[   27.076614]  kthread+0x112/0x150
[   27.076684]  ? max_active_store+0x60/0x60
[   27.077642]  ? kthread_park+0x90/0x90
[   27.078530]  ret_from_fork+0x2c/0x40

This patch moves it back to the common SA Path Record structure
and removes the redundant setter and getter.

Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively.

Fixes: 9fdca4da (IB/SA: Split struct sa_path_rec based on IB ands
	ROCE specific fields)
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add mmap_sem lock around VMA inspection in ib_umem_odp_get().

Fixes: 0008b84e ('IB/umem: Add support to huge ODP')
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This change will optimize kernel memory deregistration operations.
__ib_umem_release() used to call set_page_dirty_lock() against every
writable page in its memory region. Its purpose is to keep data
synced between CPU and DMA device when swapping happens after mem
deregistration ops. Now we choose not to set page dirty bit if it's
already set by kernel prior to calling __ib_umem_release(). This
reduces memory deregistration time by half or even more when we ran
application simulation test program.
Signed-off-by: NQing Huang <qing.huang@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Commit 57520751 ("IB/SA: Add OPA path record type") introduced
new local function __ib_copy_path_rec_to_user, but didn't limit its
scope. This produces the following sparse warning:

	drivers/infiniband/core/uverbs_marshall.c:99:6: warning:
	symbol '__ib_copy_path_rec_to_user' was not declared. Should it be
	static?

In addition, it used sizeof ... notations instead of sizeof(...), which
is correct in C, but a little bit misleading. Let's change it too.

Fixes: 57520751 ("IB/SA: Add OPA path record type")
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RDMA netlink is part of ib_core, hence ibnl_chk_listeners(),
ibnl_init() and ibnl_cleanup() don't need to be published
in public header file.

Let's remove EXPORT_SYMBOL from ibnl_chk_listeners() and move all these
functions to private header file.

CC: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If srp_init_qp() fails at srp_create_ch_ib() then ch->send_cq
may be NULL.
Calling directly to ib_destroy_qp() is sufficient because
no work requests were posted on the created qp.

Fixes: 9294000d ("IB/srp: Drain the send queue before destroying a QP")
Cc: <stable@vger.kernel.org>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ipoib_dev_uninit_default() call is used in ipoib_main.c file only
and it generates the following warning from smatch tool:
	drivers/infiniband/ulp/ipoib/ipoib_main.c:1593:6: warning:
	symbol 'ipoib_dev_uninit_default' was not declared. Should it
	be static?

so let's declare that function as static.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ipoib_dev_init accesses the wrong private data for the IPoIB device.
Commit cd565b4b (IB/IPoIB: Support acceleration options callbacks)
changed ipoib_priv from being identical to netdev_priv to being an
area inside of, but not the same pointer as, the netdev_priv pointer.
As such, the struct we want is the ipoib_priv area, not the netdev_priv
area, so use the right accessor, otherwise we kernel panic.

[   27.271938] IPv6: ADDRCONF(NETDEV_CHANGE): mlx5_ib0.8006: link becomes ready
[   28.156790] BUG: unable to handle kernel NULL pointer dereference at 000000000000067c
[   28.166309] IP: ib_query_port+0x30/0x180 [ib_core]
...
[   28.306282] RIP: 0010:ib_query_port+0x30/0x180 [ib_core]
...
[   28.393337] Call Trace:
[   28.397594]  ipoib_get_link_ksettings+0x66/0xe0 [ib_ipoib]
[   28.405274]  __ethtool_get_link_ksettings+0xa0/0x1c0
[   28.412353]  speed_show+0x74/0xa0
[   28.417503]  dev_attr_show+0x20/0x50
[   28.422922]  ? mutex_lock+0x12/0x40
[   28.428179]  sysfs_kf_seq_show+0xbf/0x1a0
[   28.434002]  kernfs_seq_show+0x21/0x30
[   28.439470]  seq_read+0x116/0x3b0
[   28.444445]  ? do_filp_open+0xa5/0x100
[   28.449774]  kernfs_fop_read+0xff/0x180
[   28.455220]  __vfs_read+0x37/0x150
[   28.460167]  ? security_file_permission+0x9d/0xc0
[   28.466560]  vfs_read+0x8c/0x130
[   28.471318]  SyS_read+0x55/0xc0
[   28.475950]  do_syscall_64+0x67/0x150
[   28.481163]  entry_SYSCALL64_slow_path+0x25/0x25
...
[   28.584493] ---[ end trace 3549968a4bf0aa5d ]---

Fixes: cd565b4b (IB/IPoIB: Support acceleration options callbacks)
Fixes: 0d7e2d21 (IB/ipoib: add get_link_ksettings in ethtool)
Signed-off-by: NHonggang Li <honli@redhat.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add null check before dereferencing pointer sgid_attr.ndev
inside function rdma_vlan_dev_vlan_id().

Addresses-Coverity-ID: 1373979
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Cache the needed umr_fence and set the wqe ctrl segmennt
accordingly.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Acked-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cited patch added a type field to structures ib_ah and rdma_ah_attr.

Function mlx4_ib_query_ah() builds an rdma_ah_attr structure from the
data in an mlx4_ib_ah structure (which contains both an ib_ah structure
and an address vector).

For mlx4_ib_query_ah() to work properly, the type field in the contained
ib_ah structure must be set correctly.

In the outgoing MAD tunneling flow, procedure mlx4_ib_multiplex_mad()
paravirtualizes a MAD received from a slave and sends the processed
mad out over the wire. During this processing, it populates an
mlx4_ib_ah structure and calls mlx4_ib_query_ah().

The cited commit overlooked setting the type field in the contained
ib_ah structure before invoking mlx4_ib_query_ah(). As a result, the
type field remained uninitialized, and the rdma_ah_attr structure was
incorrectly built. This resulted in improperly built MADs being sent out
over the wire.

This patch properly initializes the type field in the contained ib_ah
structure before calling mlx4_ib_query_ah(). The rdma_ah_attr structure
is then generated correctly.

Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory
reference when a buffer cannot be allocated for returning the immediate
data.

The issue is that the rkey validation has already occurred and the RNR
nak fails to release the reference that was fruitlessly gotten.  The
the peer will send the identical single packet request when its RNR
timer pops.

The fix is to release the held reference prior to the rnr nak exit.
This is the only sequence the requires both rkey validation and the
buffer allocation on the same packet.

Cc: Stable <stable@vger.kernel.org> # 4.7+
Tested-by: NTadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Keep VL15 credits at 0 during LNI, before link-up. Store
VL15 credits value during verify cap interrupt and set
in after link-up. This addresses an issue where VL15 MAD
packets could be sent by one side of the link before
the other side is ready to receive them.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The Omni-Path adapter driver fails to load on the ppc64le platform
due to invalid PCI setup.

This patch makes the PCI configuration more robust and will
fix 64 bit addressing for ppc64le.
Signed-off-by: NSteven L Roberts <robers97@gmail.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This fixes a kernel panic when loading the hfi driver as a dynamic module.
Signed-off-by: NSteven L Roberts <robers97@gmail.com>
Reviewed-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>