- 26 12月, 2008 7 次提交
-
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. I'm not sure the existing code even compiles, but new version is straightforward. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Richard Henderson <rth@twiddle.net>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ralf Baechle <ralf@linux-mips.org>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. We can also use the new for_each_cpu_and() to avoid a temporary cpumask, and a gratuitous test in sn_topology_show. (Includes fix from KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Tony Luck <tony.luck@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. (Also replaces powerpc internal uses of node_to_cpumask). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Paul Mundt <lethal@linux-sh.org>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Also makes __pcibus_to_node take a const pointer. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu>
-
- 19 12月, 2008 4 次提交
-
-
由 Mike Travis 提交于
Add information to cputopology.txt explaining the output of various system cpumask's. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Travis 提交于
Impact: add new sysfs files. Add sysfs files "kernel_max" and "offline" to display the max CPU index allowed (NR_CPUS-1), and the map of cpus that are offline. Cpus can be offlined via HOTPLUG, disabled by the BIOS ACPI tables, or if they exceed the number of cpus allowed by the NR_CPUS config option, or the "maxcpus=NUM" kernel start parameter. The "possible_cpus=NUM" parameter can also extend the number of possible cpus allowed, in which case the cpus not present at startup will be in the offline state. (These cpus can be HOTPLUGGED ON after system startup [pending a follow-on patch to provide the capability via the /sys/devices/sys/cpu/cpuN/online mechanism to bring them online.]) By design, the "offlined cpus > possible cpus" display will always use the following formats: * all possible cpus online: "x$" or "x-y$" * some possible cpus offline: ".*,x$" or ".*,x-y$" where: x == number of possible cpus (nr_cpu_ids); and y == number of cpus >= NR_CPUS or maxcpus (if y > x). One use of this feature is for distros to select (or configure) the appropriate kernel to install for the resident system. Notes: * cpus offlined <= possible cpus will be printed for all architectures. * cpus offlined > possible cpus will only be printed for arches that set 'total_cpus' [X86 only in this patch]. Based on tip/cpus4096 + .../rusty/linux-2.6-for-ingo.git/master + x86-only-patches sent 12/15. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Mike Travis 提交于
Impact: New kerneldoc comments Additional documentation added to all the alloc_cpumask and free_cpumask functions. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor additions)
-
由 Mike Travis 提交于
Impact: New API This will be needed in x86 code to allocate the domain and old_domain cpumasks on the same node as where the containing irq_cfg struct is allocated. (Also fixes double-dump_stack on rare CONFIG_DEBUG_PER_CPU_MAPS case) Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (re-impl alloc_cpumask_var)
-
- 13 12月, 2008 7 次提交
-
-
由 Rusty Russell 提交于
Impact: futureproof as we convert more code to new APIs The old cpumask operators treat all NR_CPUS bits as relevent, the new ones use nr_cpumask_bits. For large NR_CPUS and small nr_cpu_ids, this makes a difference. However, mixing the two can cause problems with undefined bits. An arch which sets CONFIG_CPUMASK_OFFSTACK should have converted across to the new operators, so it's safe in that case. (Thanks to Stephen Rothwell for bisecting the initial unused-bits bug, and Mike Travis for this solution). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Mike Travis <travis@sgi.com>
-
由 Rusty Russell 提交于
Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. This defines them in the generic non-NUMA case. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net>
-
由 Rusty Russell 提交于
Impact: Add config option to enable code in cpumask.h Currently it can be set if DEBUG_PER_CPU_MAPS, or set specifically by an arch. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Rusty Russell 提交于
Impact: change existing irq_chip API Not much point with gentle transition here: the struct irq_chip's setaffinity method signature needs to change. Fortunately, not widely used code, but hits a few architectures. Note: In irq_select_affinity() I save a temporary in by mangling irq_desc[irq].affinity directly. Ingo, does this break anything? (Folded in fix from KOSAKI Motohiro) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Reviewed-by: NGrant Grundler <grundler@parisc-linux.org> Acked-by: NIngo Molnar <mingo@redhat.com> Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: jeremy@xensource.com Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
-
由 Rusty Russell 提交于
cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers. Impact: change calling convention of existing cpumask APIs Most cpumask functions started with cpus_: these have been replaced by cpumask_ ones which take struct cpumask pointers as expected. These four functions don't have good replacement names; fortunately they're rarely used, so we just change them over. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: mingo@redhat.com Cc: tony.luck@intel.com Cc: ralf@linux-mips.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: cl@linux-foundation.org Cc: srostedt@redhat.com
-
由 Rusty Russell 提交于
Impact: cleanup Each SMP arch defines these themselves. Move them to a central location. Twists: 1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a CONFIG_INIT_ALL_POSSIBLE for this rather than break them. 2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'. Those archs simply have phys_cpu_present_map replaced everywhere. 3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky so I just manipulate them both in sync. 4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map' declarations. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Reviewed-by: NGrant Grundler <grundler@parisc-linux.org> Tested-by: NTony Luck <tony.luck@intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Mike Travis <travis@sgi.com> Cc: ink@jurassic.park.msu.ru Cc: rmk@arm.linux.org.uk Cc: starvik@axis.com Cc: tony.luck@intel.com Cc: takata@linux-m32r.org Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: paulus@samba.org Cc: schwidefsky@de.ibm.com Cc: lethal@linux-sh.org Cc: wli@holomorphy.com Cc: davem@davemloft.net Cc: jdike@addtoit.com Cc: mingo@redhat.com
-
- 11 12月, 2008 22 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit b1ee26ba, along with the "fixes" for it that all just caused problems: - c4c6fa98 "radeonfb: fix problem with color expansion & alignment" - f3179748 "radeonfb: Disable new color expand acceleration unless explicitely enabled" because even when disabled, it breaks for people. See http://bugzilla.kernel.org/show_bug.cgi?id=12191 for the latest example. Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: James Cloos <cloos@jhcloos.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Jean-Luc Coulon <jean.luc.coulon@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: CPU remove deadlock fix
-
由 Hugh Dickins 提交于
Lee Schermerhorn noticed yesterday that I broke the mapping_writably_mapped test in 2.6.7! Bad bad bug, good good find. The i_mmap_writable count must be incremented for VM_SHARED (just as i_writecount is for VM_DENYWRITE, but while holding the i_mmap_lock) when dup_mmap() copies the vma for fork: it has its own more optimal version of __vma_link_file(), and I missed this out. So the count was later going down to 0 (dangerous) when one end unmapped, then wrapping negative (inefficient) when the other end unmapped. The only impact on x86 would have been that setting a mandatory lock on a file which has at some time been opened O_RDWR and mapped MAP_SHARED (but not necessarily PROT_WRITE) across a fork, might fail with -EAGAIN when it should succeed, or succeed when it should fail. But those architectures which rely on flush_dcache_page() to flush userspace modifications back into the page before the kernel reads it, may in some cases have skipped the flush after such a fork - though any repetitive test will soon wrap the count negative, in which case it will flush_dcache_page() unnecessarily. Fix would be a two-liner, but mapping variable added, and comment moved. Reported-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland由 Linus Torvalds 提交于
* 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: tracehook: exec double-reporting fix
-
由 Manfred Spraul 提交于
The last patch to lib/idr.c caused a bug if idr_get_new_above() was called on an empty idr. Usually, nodes stay on the same layer. New layers are added to the top of the tree. The exception is idr_get_new_above() on an empty tree: In this case, the new root node is first added on layer 0, then moved upwards. p->layer was not updated. As usual: You shall never rely on the source code comments, they will only mislead you. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akira Takeuchi 提交于
Give the correct size when reserving the interrupt vector table. It should be a page not a single byte. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akira Takeuchi 提交于
Fix __put_user_asm8() by jumping to the end label (3:) from the exception handler, rather than jumping back to retry the second store instruction (label 2:). Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akira Takeuchi 提交于
Fix the preemption resume_kernel() routine by inverting the test to see whether interrupts are off (IM7 is all enabled, not all disabled). Furthermore, interrupts should be disabled on entry to resume_kernel() so that they're correctly set for jumping to restore_all() and doing the need reschedule test. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akira Takeuchi 提交于
Discard low-prioriy Tx interrupts when closing an MN10300 on-chip serial port. The MN10300 on-chip serial port uses three interrupts to manage its serial ports: (1) A very high priority interrupt that drives virtual DMA for Rx. (2) A very high priority interrupt that drives virtual DMA for Tx. (3) A normal priority virtual interrupt that does the normal UART interrupt stuff and is shared between Rx and Tx. mn10300_serial_stop_tx() only disables the high priority Tx interrupt. It doesn't also disable the normal priority one because it is shared with Rx. However, the high priority interrupt may interrupt local_irq_disabled() sections, and so may have queued up a low priority virtual interrupt whilst the UART driver is asking for the Tx interrupt to be disabled. The result of this can be an oops when we try to process the interrupt in mn10300_serial_transmit_interrupt() as port->uart.info and port->uart.info->tty may have gone away. To deal with this, if either of those pointers is NULL, we make sure the high-priority Tx interrupt is disabled and discard the interrupt. The low priority interrupt is disabled by the mn10300_serial_pic irq_chip table. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
Include the linux/page.h header into the MN10300 kernel linker script thus allowing us to use PAGE_SIZE macro instead of a numeric constant. Also use the PERCPU macro instead of an explicit section definition. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Disallow cryptomgr as a module if algorithms are built-in
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch PCI: stop leaking 'slot_name' in pci_create_slot
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN: prevent IRQ retargetting in request_irq() [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule [IA64] Clear up section mismatch for ioc4_ide_attach_one. [IA64] Clear up section mismatch with arch_unregister_cpu() [IA64] Clear up section mismatch for sn_check_wars. [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE [IA64] eliminate NULL test and memset after alloc_bootmem [IA64] remove BUILD_BUG_ON from paravirt_getreg()
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Better than nothing implementation of PCI mmap to fix X.
-
由 Kay Sievers 提交于
The pktcdvd created class devices only export some sysfs files, but have no char dev_t registered in the driver. At class device creation time they copy the dev_t value of the block device to the char device, wich will register a new char device in the driver core and userspace, with a conflicting dev_t value. In many cases the class devices dev_t just points to a random USB device. This fixes the sysfs "duplicate entry" errors. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Acked-by: NPeter Osterlund <petero2@telia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-ohci: fix IOMMU resource exhaustion ieee1394: node manager causes up to ~3.25s delay in freezing tasks
-
由 Andrew Morton 提交于
sparc64: drivers/video/mb862xx/mb862xxfb.c:929: warning: long long unsigned int format, resource_size_t arg (arg 4) drivers/video/mb862xx/mb862xxfb.c:931: warning: long long unsigned int format, resource_size_t arg (arg 4) We don't know what type the architecture uses to implement u64, hence they cannot be printed. Cc: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked to my 966c8c12 sprint_symbol(): use less stack exposing a bug in slub's list_locations() - kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was beyond the end of page provided. The 100 slop which list_locations() allows at end of page looks roughly enough for all the other stuff it might print after the symbol before it checks again: break out KSYM_SYMBOL_LEN earlier than before. Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies them. [akpm@linux-foundation.org: ftrace.h needs module.h] Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc Miles Lane <miles.lane@gmail.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NSteven Rostedt <srostedt@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitri Monakhov 提交于
On umount two event will be dispatched to watcher: 1: inotify_dev_queue_event(.., IN_UNMOUNT,..) 2: remove_watch(watch, dev) ->inotify_dev_queue_event(.., IN_IGNORED, ..) But if watcher has IN_ONESHOT bit set then the watcher will be released inside first event. Which result in accessing invalid object later. IMHO it is not pure regression. This bug wasn't triggered while initial inotify interface testing phase because of another bug in IN_ONESHOT handling logic :) commit ac74c00e Author: Ulisses Furquim <ulissesf@gmail.com> Date: Fri Feb 8 04:18:16 2008 -0800 inotify: fix check for one-shot watches before destroying them As the IN_ONESHOT bit is never set when an event is sent we must check it in the watch's mask and not in the event's mask. TESTCASE: mkdir mnt mount -ttmpfs none mnt mkdir mnt/d ./inotify mnt/d& umount mnt ## << lockup or crash here TESTSOURCE: /* gcc -oinotify inotify.c */ #include <stdio.h> #include <stdlib.h> #include <sys/inotify.h> int main(int argc, char **argv) { char buf[1024]; struct inotify_event *ie; char *p; int i; ssize_t l; p = argv[1]; i = inotify_init(); inotify_add_watch(i, p, ~0); l = read(i, buf, sizeof(buf)); printf("read %d bytes\n", l); ie = (struct inotify_event *) buf; printf("event mask: %d\n", ie->mask); return 0; } Signed-off-by: NDmitri Monakhov <dmonakhov@openvz.org> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Robert Love <rlove@google.com> Cc: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
atomic_long_xchg() is not correctly defined for 32bit arches. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Brice Goglin 提交于
Since commit 2f007e74, do_pages_stat() gets the page address from user-space and puts the corresponding status back while holding the mmap_sem for read. There is no need to hold mmap_sem there while some page-faults may occur. This patch adds a temporary address and status buffer so as to only hold mmap_sem while working on these kernel buffers. This is implemented by extracting do_pages_stat_array() out of do_pages_stat(). Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr> Cc: Christoph Lameter <clameter@sgi.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-