Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Cc: Andreas Oberritter <obi@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Move rtl2831u LED from streaming control to power control. It
changes LED behavior slightly but who cares :)
After that same streaming control can be used for both rtl2831u
and rtl2832u.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tested-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in
the device IDs list.
Reported-by: NStefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The SPCAM SP620U camera uses the alternate "Y8  " GUID for the 8-bit
greyscale format, and supports a 12-bit greyscale format. Add support
for those in the driver, as well as for 10-bit greyscale formats.
Signed-off-by: NStefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Compute the maximum number of bytes per interval using the burst and
multiplier values for super speed endpoints.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for yet another SAA7146-based budget card (very similar to TT
S2-1600, but use LNBH23 instead ISL6423).
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This driver has been replaced by stk1160.
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This driver adds support for stk1160 usb bridge as used in some
video/audio usb capture devices.
It is a complete rewrite of staging/media/easycap driver and
it's meant as a replacement.

As stk1160 allows communication with an ac97 codec chip, this
driver allows to register a control-only sound card to allow the user
to access ac97 controls.

Two devices have been used for testing:
* 1-cvbs video and 1-audio ac97 input,
* 4-cvbs inputs
Both of these devices reports with the same id [05e1:0408],
so the driver tries to support a superset of the capabilities.

By using keep_buffers module parameter it's possible to prevent
the driver from releasing urb buffers when streaming is stopped.
The usage of this parameter can avoid memory fragmentation that may
cause the driver to stop working on low memory systems.
A similar mechanism is implemented in em28xx driver (see commit 86d38d).
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

qt1010_init_meas2() returns zero on success and negative error codes on
failure so the return type should be int instead of u8.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Trivial fix.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Trivial fix.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The MEDIA_IOC_DEVICE_INFO ioctl was returning a positive value rather
than a negative error code when failing to copy output parameter to
user-space.

Tested by compilation only.
Signed-off-by: NNicolas Thery <nicolas.thery@st.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Those files were at the wrong place, probably due to the usage of a
previous version of dvb-usb-v2 tree.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Conversion of lmedm04 to dvb-usb-v2

Functional changes m88rs2000 tuner now uses all callbacks.
TODO migrate other tuners to the callbacks.

This patch is applied on top of [BUG] Re: dvb_usb_lmedm04 crash Kernel (rs2000)
http://patchwork.linuxtv.org/patch/13584/Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Tested-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This DVB_FE_IOCTL_POST isn't used, so remove it.

Also, intercepting ioctl's like that only works with legacy ioctl's,
due to the way it was implemented. so this design is broken.
Document it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

structure variables can be assigned, no memcpy needed,
remove the memcpy and use assignment for the cfg and en variables.

Tested by Compilation Only
Suggested-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: media: cxd2099: use kzalloc to allocate ci pointer of type struct cxd in cxd2099_attach

this does kmalloc and followed by memset, calling kzalloc will actually
sets the allocated memory to zero, use kzalloc instead
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following sparse warnings were fixed

drivers/staging/media/cxd2099/cxd2099.c:686:26: warning: Using plain integer as NULL pointer
drivers/staging/media/cxd2099/cxd2099.c:691:24: warning: Using plain integer as NULL pointer
drivers/staging/media/cxd2099/cxd2099.c:696:24: warning: Using plain integer as NULL pointer
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This was introduced on commit c2a6b54a:
"em28xx: fix: don't do image interlacing on webcams"

The proposed patch by Ezequiel is wrong. The right fix here is to just
don't bother here if either the image is progressive or not.
Reported-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix "symbol 'vb2_vmalloc_memops' was not declared. Should it be static?"
sparse warning.
Signed-off-by: NNicolas Thery <nicolas.thery@st.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

>From 59306435992d9349f10ad82a8adf14d98becbbe8 Mon Sep 17 00:00:00 2001
Signed-off-by: NHans Petter Selasky <hselasky@c2i.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There is a missing error handling when no firmware file found.

It seems that this is more of a problem with udev-182+.

However, so far udev-182 is only a problem on first ever plug.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Tested-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This code is based on ngene initial check-in (dae52d00)
Signed-off-by: NPatrice Chotard <patricechotard@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for Thomson DTT7520X pll needed by
ngene card Terratec Cynergy 2400i DT
Signed-off-by: NPatrice Chotard <patricechotard@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This remote sends a header pulse of 8150us followed by a space of 4000us.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt]
Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add the missing AUDIO_* ioctls and document the V4L2 replacements for the
various DVB AUDIO ioctls that were (ab)used by V4L2.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- update 2011 to 2012 for copyrights
- update V4L2 spec version to 3.6
- update the intro to also refer to part four: the Media Controller
- fix an incorrect revision section
- fix an incorrect 3.6 kernel changes section
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>