So far, we map all VPEs on all ITSs. While this is not wrong,
this is quite a big hammer, as moving a VPE around requires
all ITSs to be synchronized. Needles to say, this is an
expensive proposition.

Instead, let's switch to a mode where we issue VMAPP commands
only on ITSs that are actually involved in reporting interrupts
to the given VM.

For that purpose, we refcount the number of interrupts are are
mapped for this VM on each ITS, performing the map/unmap
operations as required. It then allows us to use this refcount
to only issue VMOVP to the ITSs that need to know about this
VM.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Currently, its_send_vmapp operates on all ITSs. As we're about
to try and limit the amount of commands we send to ITSs that are
not involved in dealing with a given VM, let's redefine that
primitive so that it takes a target ITS as a parameter.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Currently, its_send_vinvall operates on all ITSs. As we're about
to try and limit the amount of commands we send to ITSs that are
not involved in dealing with a given VM, let's redefine that
primitive so that it takes a target ITS as a parameter.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we're about to make use of the maximum number of ITSs in
a GICv4 system, let's make this value global (and rename it to
GICv4_ITS_LIST_MAX).
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

At boot time, we enumerate all the GICv4-capable ITSs, and build
a mask of the available ITSs. Take this opportunity to store
the ITS number in the its_node structure so that we can use it
at a later time.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The ITSes on the Hip07 (as present in the Huawei D05) are broken when
it comes to addressing the redistributors, and need to be explicitely
told to address the VLPI page instead of the redistributor base address.

So let's add yet another quirk, fixing up the target address
in the command stream.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In order to be able to issue command variants depending on
how broken an ITS is, let's pass the its pointer to all
command building primitives.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

If the ITS stops processing commands, we're pretty much toasted
as we cannot update the configuration anymore (and we're not
even sure that the ITS still translates interrups).

If that happens, let's dump some basic information about the
state of affairs before moving on.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The Socionext Synquacer SoC's implementation of GICv3 has a so-called
'pre-ITS', which maps 32-bit writes targeted at a separate window of
size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device
ID taken from bits [device_id_bits + 1:2] of the window offset.
Writes that target GITS_TRANSLATER directly are reported as originating
from device ID #0.

So add a workaround for this. Given that this breaks isolation, clear
the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As it turns out, the IIDR is not sufficient to distinguish between GICv3
implementations when it comes to enabling quirks. So update the prototype
of the init() hook to return a bool, and interpret a 'false' return value
as no match, in which case the 'enabling workaround' log message should
not be printed.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Before adding another SoC whose device ID space deviates from the
value presented in the GIC ID registers, let's slightly refactor
the code so that the ID registers are probed before that quirks
handling executes. This allows us to move the device ID override
into the quirk handler itself.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

A new feature Range Selector (RS) has been added to GIC specification
in order to support more than 16 CPUs at affinity level 0. New fields
are introduced in SGI system registers (ICC_SGI0R_EL1, ICC_SGI1R_EL1
and ICC_ASGI1R_EL1) to relax an artificial limit of 16 at level 0.

- A new RSS field in ICC_CTLR_EL3, ICC_CTLR_EL1 and ICV_CTLR_EL1:
  [18] - Range Selector Support (RSS)
  0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
  0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.

- A new RS field in ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1:
  [47:44] - RangeSelector (RS) which group of 16 TargetList[n] field
            TargetList[n] represents aff0 value ((RS*16)+n)
            When ICC_CTLR_EL3.RSS==0 or ICC_CTLR_EL1.RSS==0, RS is RES0.

- A new RSS field in GICD_TYPER:
  [26] - Range Selector Support (RSS)
  0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
  0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.
Signed-off-by: NShanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the initialization of the generic irq chip for the BCM7271 L2
interrupt controller.  This controller only supports level
interrupts and uses the "brcm,bcm7271-l2-intc" compatibility
string.
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Added register block offsets to the brcmstb_l2_intc_data structure
for the status and mask registers to support reading the active
interupts in an abstracted way.  It seems like an irq_chip method
should have been provided for this, but it's not there yet.

Abstracted the implementation of the handler, suspend, and resume
functions to not use any hard coded register offsets.
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Saving the generic chip pointer in the brcmstb_l2_intc_data prevents
the need to call irq_get_domain_generic_chip().  Also don't need to
save parent_irq and base there since local variables in the
brcmstb_l2_intc_of_init() function are just as good.

The handle_edge_irq flow or chained_irq_enter takes care of the
acknowledgment of the interrupt so it is redundant to clear it in
brcmstb_l2_intc_irq_handle().

irq_linear_revmap() is a fast path equivalent of irq_find_mapping()
that is appropriate to use for domain controllers of this type.

Defining irq_mask_ack is slightly more efficient than just
implementing irq_mask and irq_ack separately.
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Use the of_device_get_match_data() helper instead of open coding.
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Document support for the Interrupt Controller for Externel Devices
(INTC-EX) in the Renesas M3-W (r8a7796), V3M (r8a77970), and D3
(r8a77995) SoCs.

No driver update is needed.
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Fix different address spaces warning of sparse.

kernel/irq/irqdomain.c:1463:14: warning: incorrect type in assignment (different address spaces)
kernel/irq/irqdomain.c:1463:14:    expected void **slot
kernel/irq/irqdomain.c:1463:14:    got void [noderef] <asn:4>**
kernel/irq/irqdomain.c:1465:66: warning: incorrect type in argument 2 (different address spaces)
kernel/irq/irqdomain.c:1465:66:    expected void [noderef] <asn:4>**slot
kernel/irq/irqdomain.c:1465:66:    got void **slot
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The revmap_trees_mutex protects domain->revmap_tree.  There is no
need to make it global because it is allowed to modify revmap_tree
of two different domains concurrently.  Having said that, this would
not be a actual bottleneck because the interrupt map/unmap does not
occur quite often.  Rather, the motivation is to tidy up the code
from a data structure point of view.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add a menu for IRQ chip drivers. This makes the Device drivers menu be more
consistent (listing "subsystems" instead of specific options) and makes the
IRQCHIP options be listed in expected places for 'make menu|xconfig'.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/3db7385a-c6a1-5c93-0797-6f4b6b2b2cde@infradead.org

omap_nr_pending and omap_nr_irqs variables are initialized
right at the beginning of intc_of_init function, so there's
no need to statically initialize them.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20171016161303.veumgcd3xom5c54r@lenoch

All mach-omap2 variants are device tree only now, so this function is dead
code. Remove it.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-omap@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20171016160422.uu2i7vvrgy7cc4aw@lenoch

Add tracepoints for the irq bitmap matrix allocator.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213153.279468022@linutronix.de

Implement the infrastructure for a simple bitmap based allocator, which
will replace the x86 vector allocator. It's in the core code as other
architectures might be able to reuse/extend it. For now it only implements
allocations for single CPUs, but it's simple to add multi CPU allocation
support if required.

The concept is rather simple:

 Global information:
 	system_vector bitmap
	global accounting

 PerCPU information:
 	allocation bitmap
	managed allocation bitmap
	local accounting

The system vector bitmap is used to exclude vectors system wide from the
allocation space.

The allocation bitmap is used to keep track of per cpu used vectors.

The managed allocation bitmap is used to reserve vectors for managed
interrupts.

When a regular (non managed) interrupt allocation happens then the
following rule applies:

      tmpmap = system_map | alloc_map | managed_map
      find_zero_bit(tmpmap)

Oring the bitmaps together gives the real available space. The same rule
applies for reserving a managed interrupt vector. But contrary to the
regular interrupts the reservation only marks the bit in the managed map
and therefor excludes it from the regular allocations. The managed map is
only cleaned out when the a managed interrupt is completely released and it
stays alive accross CPU offline/online operations.

For managed interrupt allocations the rule is:

      tmpmap = managed_map & ~alloc_map
      find_first_bit(tmpmap)

This returns the first bit which is in the managed map, but not yet
allocated in the allocation map. The allocation marks it in the allocation
map and hands it back to the caller for use.

The rest of the code are helper functions to handle the various
requirements and the accounting which are necessary to replace the x86
vector allocation code. The result is a single patch as the evolution of
this infrastructure cannot be represented in bits and pieces.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213153.185437174@linutronix.de

Allow irqdomains to tell the core code, that after early activation the
interrupt needs to be reactivated at request_irq() time.

This allows reservation of vectors at early activation time and actual
vector assignment at request_irq() time.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213153.106242536@linutronix.de

Propagate the early activation mode to the irqdomain activate()
callbacks. This is required for the upcoming reservation, late vector
assignment scheme, so that the early activation call can act accordingly.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213153.028353660@linutronix.de

Allow irq_domain_activate_irq() to fail. This is required to support a
reservation and late vector assignment scheme.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de

The irq_domain_ops.activate() callback has no return value and no way to
tell the function that the activation is early.

The upcoming changes to support a reservation scheme which allows to assign
interrupt vectors on x86 only when the interrupt is actually requested
requires:

  - A return value, so activation can fail at request_irq() time
  
  - Information that the activate invocation is early, i.e. before
    request_irq().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de

Activation of an interrupt and startup are currently a combo
functionlity. That works so far, but upcoming changes require a strict
separation because the activation can fail in future.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de

Managed interrupts should start up in managed shutdown mode. Set the status
flag when initialising the irq descriptor.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.669687742@linutronix.de

In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not
setting/clearing the activation status bits. This is not a problem at the
moment, but upcoming changes require a correct status.

Add the set/clear incovations to the stub functions and move them to the
core internal header to avoid duplication and visibility outside the core.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de

Some interrupt domains like the X86 vector domain has special requirements
for debugging, like showing the vector usage on the CPUs.

Add a callback to the irqdomain ops which can be filled in by domains which
require it and add conditional invocations to the irqdomain and the per irq
debug files.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.512937505@linutronix.de

For debugging the allocation of unused or potentially leaked interrupt
descriptor it's helpful to have some information about the site which
allocated them. In case of MSI this is simple because the caller hands the
device struct pointer into the domain allocation function.

Duplicate the device name and show it in the debugfs entry of the interrupt
descriptor.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.433038426@linutronix.de

Currently the debugfs shows only information about actively used interrupts
like /proc/irq/ does. That's fine for most cases, but not helpful when
internals of allocated, but unused interrupt descriptors have to
debugged. It's also useful to provide information about all descriptors so
leaks can be debugged in a simpler way.

Move the debugfs registration to the descriptor allocation code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Tested-by: NYu Chen <yu.c.chen@intel.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.355525908@linutronix.de

__free_irq() can return a NULL irqaction for example when trying to free
already-free IRQ, but the callsite unconditionally dereferences the
returned pointer.

Fix this by adding a check and return NULL.
Signed-off-by: NAlexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20170919200412.GA29985@gmail.com

Pull DeviceTree fixes from Rob Herring:

 - fix build for !OF providing empty of_find_device_by_node

 - fix Abracon vendor prefix

 - sync dtx_diff include paths (again)

 - a stm32h7 clock binding doc fix

* tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clk: stm32h7: fix clock-cell size
  scripts/dtc: dtx_diff - 2nd update of include dts paths to match build
  dt-bindings: fix vendor prefix for Abracon
  of: provide inline helper for of_find_device_by_node

Pull x86 fixes from Ingo Molnar:
 "Another round of CR3/PCID related fixes (I think this addresses all
  but one of the known problems with PCID support), an objtool fix plus
  a Clang fix that (finally) solves all Clang quirks to build a bootable
  x86 kernel as-is"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Fix inline asm call constraints for Clang
  objtool: Handle another GCC stack pointer adjustment bug
  x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
  x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
  x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
  x86/mm: Factor out CR3-building code

Pull timer fix from Ingo Molnar:
 "A clocksource driver section mismatch fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/integrator: Fix section mismatch warning

Pull irq fixes from Ingo Molnar:
 "Three irqchip driver fixes, and an affinity mask helper function bug
  fix affecting x86"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "genirq: Restrict effective affinity to interrupts actually using it"
  irqchip.mips-gic: Fix shared interrupt mask writes
  irqchip/gic-v4: Fix building with ancient gcc
  irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()