- 22 6月, 2015 13 次提交
-
-
由 Charles Keepax 提交于
This patch adds functions for enabling and disabling the physical reset line. This will be helpful in future refactoring. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
This also handily fixes a leak of the GPIO in arizona_dev_exit. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Lee Jones 提交于
The System Configuration (syscon) driver is an important one, which effects many ARM-SoC based platforms. I'm adding Arnd as a primary reviewer as he is highly competent in this area and has a keen interest in ARM-SoC. Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Krzysztof Kozlowski 提交于
Extend the entry for Samsung MFD drivers for PMIC devices (Power Management Integrated Circuit) with bindings documentation, clock (clk-s2mps11.c) and RTC drivers (rtc-s5m.c). These PMIC devices are used on many Exynos-based boards like Arndale Octa (S2MPS11), Gear 2 (S2MPS14). Add Krzysztof Kozlowski as a supporter for reviewing them. I am not the author of these drivers. However I have recently contributed to most of them and I have access to datasheets and hardware. Cc: Sangbeom Kim <sbkim73@samsung.com> CC: Mike Turquette <mturquette@linaro.org> CC: Stephen Boyd <sboyd@codeaurora.org> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Alexandre Belloni <alexandre.belloni@free-electrons.com> CC: Liam Girdwood <lgirdwood@gmail.com> CC: Mark Brown <broonie@kernel.org> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Geert Uytterhoeven 提交于
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
The defined struct max77686_opmode_data isn't used neither by the max77686 mfd driver nor the drivers for its sub-devices. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Tony Lindgren 提交于
I noticed the PMIC configuration on 37xx-evm won't actually shut down the voltages during off-idle. Turns out 37xx-evm needs the AC charger state transitions disabled like we are doing for SDP and LDP in the legacy booting case. Let's fix this for device tree based booting by setting up the quirk flag based on the compatible flag. And let's also use the existing define for STARTON_CHG. Note that SDP and EVM do not have the PMIC clken wired to gate the the oscillator while LDP has. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Fabio Estevam 提交于
Fix typo in 'Multifunction'. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
This soft reset used to be located after the register patch had been applied, but has since moved to before the patch is applied. At the new location there is no requirement to do a register sync as no register writes will have happened yet. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Jacek Anaszewski 提交于
This patch adds device tree binding documentation for the flash cell of the Maxim max77693 multifunctional device. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Krzysztof Kozlowski 提交于
Constify in various drivers configuration data which is not modified: - regmap_irq_chip, - individual regmap_irq's in array, - regmap_config, - irq_domain_ops, Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Lee Jones 提交于
Merge branches 'ib-mfd-watchdog-rtc-4.2', 'ib-mfd-regulator-4.2' and 'ib-mfd-i2c-input-chrome-4.2' into ibs-for-mfd-merged
-
由 Lee Jones 提交于
Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 15 6月, 2015 10 次提交
-
-
由 Alexandru M Stan 提交于
Some ECs need a little time for waking up before they can accept SPI data at a high speed. This is configurable via a DT property "google,cros-ec-spi-pre-delay". This patch makes the cros_ec_spi driver to cause a delay before the beginning of a SPI transaction, to make sure that the EC has already woken up, if the property has been defined in the DTS. Signed-off-by: NAlexandru M Stan <amstan@chromium.org> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NChris Zhong <zyw@rock-chips.com> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Alexandru M Stan 提交于
Some ECs need a little time for waking up before they can accept SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay" property to the DT binding to configure this. If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the beginning of a transaction. Signed-off-by: NAlexandru M Stan <amstan@chromium.org> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NChris Zhong <zyw@rock-chips.com> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Gwendal Grignou 提交于
Chromebooks can have more than one Embedded Controller so the cros_ec device id has to be incremented for each EC registered. Add a new structure to represent multiple EC as different char devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to cros_ec_device and allows sysfs inferface for cros_pd. Also reduce number of allocated objects, make chromeos sysfs class object a static and add refcounting to prevent object deletion while command is in progress. Signed-off-by: NGwendal Grignou <gwendal@chromium.org> Reviewed-by: NDmitry Torokhov <dtor@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Add proto v3 support to the SPI, I2C, and LPC. Signed-off-by: NStephen Barber <smbarber@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Add support in cros_ec.c to handle EC host command protocol v3. For v3+, probe for maximum shared protocol version and max request, response, and passthrough sizes. For now, this will always fall back to v2, since there is no bus-specific code for handling proto v3 packets. Signed-off-by: NStephen Barber <smbarber@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
The MFD driver should only have the logic to instantiate its child devices and setup any shared resources that will be used by the subdevices drivers. The cros_ec MFD is more complex than expected since it also has helpers to communicate with the EC. So the driver will only get more bigger as other protocols are supported in the future. So move the communication protocol helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c. Suggested-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Update cros_ec_commands.h to the latest version in the EC firmware sources and add power domain and passthru commands. Also, update lightbar to use new command names. Signed-off-by: NStephen Barber <smbarber@chromium.org> Reviewed-by: NRandall Spangler <rspangler@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
Commit 1b84f2a4 ("mfd: cros_ec: Use fixed size arrays to transfer data with the EC") modified the struct cros_ec_command fields to not use pointers for the input and output buffers and use fixed length arrays instead. This change was made because the cros_ec ioctl API uses that struct cros_ec_command to allow user-space to send commands to the EC and to get data from the EC. So using pointers made the API not 64-bit safe. Unfortunately this approach was not flexible enough for all the use-cases since there may be a need to send larger commands on newer versions of the EC command protocol. So to avoid to choose a constant length that it may be too big for most commands and thus wasting memory and CPU cycles on copy from and to user-space or having a size that is too small for some big commands, use a zero-length array that is both 64-bit safe and flexible. The same buffer is used for both output and input data so the maximum of these values should be used to allocate it. Suggested-by: NGwendal Grignou <gwendal@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Todd Broch 提交于
If the EC device tree node has sub-nodes, try to instantiate them as MFD sub-devices. We can configure the EC features provided by the board. Signed-off-by: NTodd Broch <tbroch@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Gwendal Grignou 提交于
Parent and device were pointing to the same device structure. Parent is unused, removed. Signed-off-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NStephen Barber <smbarber@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NGwendal Grignou <gwendal@chromium.org> Reviewed-by: NPuthikorn Voravootivat <puthik@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 13 5月, 2015 6 次提交
-
-
由 Chen-Yu Tsai 提交于
Now that the axp20x-regulators driver supports different variants of the AXP family, we can enable regulator support for AXP22X without the risk of incorrectly configuring regulators. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Chen-Yu Tsai 提交于
Add the list of regulators for AXP22x to the DT bindings. This includes the names and supply names. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Boris BREZILLON 提交于
Add AXP22X regulator definitions and variant id associations. This introduces a new "switch" type output for one of the regulators. It is a switchable secondary output of one regulator, with the same voltage level as the primary output. Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: Moved variant choosing to multi family support patch] [wens@csie.org: Add dc-dc work frequency range] [wens@csie.org: Add "switch" type output regulator DC1SW] Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NMark Brown <broonie@kernel.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Boris BREZILLON 提交于
Rework the AXP20X_ macros and probe function to support the several chip families, so that each family can define it's own set of regulators. Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: Support different DC-DC work frequency ranges] Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NMark Brown <broonie@kernel.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Chen-Yu Tsai 提交于
Add AXP221 to the list of supported devices. Also replace any mention of AXP20x in the document with a generic "PMIC". Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Boris BREZILLON 提交于
Add support for the AXP22x PMIC devices to the existing AXP20x driver. This includes the AXP221 and AXP223, which are identical except for the external data bus. Only AXP221 is added for now. AXP223 will be added after it's Reduced Serial Bus (RSB) interface is supported. AXP22x defines a new set of registers, power supplies and regulators, but most of the API is similar to the AXP20x ones. A new irq chip definition is used, even though the available interrupts on AXP22x is a subset of those on AXP20x. This is done so the interrupt numbers match those on the datasheet. This patch only enables the interrupts, system power-off function, and PEK sub-device. The regulator driver must first support different variants before we enable it from the mfd driver. Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: fix interrupts and move regulators to separate patch] Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 04 5月, 2015 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchip由 Dave Airlie 提交于
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
- 03 5月, 2015 3 次提交
-
-
由 Jan Kara 提交于
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NEric Sandeen <sandeen@redhat.com>
-
由 Davide Italiano 提交于
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: NDavide Italiano <dccitaliano@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Lukas Czerner 提交于
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-