- 12 2月, 2010 23 次提交
-
-
由 Suresh Siddha 提交于
Generic support for PTRACE_GETREGSET/PTRACE_SETREGSET commands which export the regsets supported by each architecture using the correponding NT_* types. These NT_* types are already part of the userland ABI, used in representing the architecture specific register sets as different NOTES in an ELF core file. 'addr' parameter for the ptrace system call encode the REGSET type (using the corresppnding NT_* type) and the 'data' parameter points to the struct iovec having the user buffer and the length of that buffer. struct iovec iov = { buf, len}; ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov); On successful completion, iov.len will be updated by the kernel specifying how much the kernel has written/read to/from the user's iov.buf. x86 extended state registers are primarily exported using this interface. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100211195614.886724710@sbs-t61.sc.intel.com> Acked-by: NHongjiu Lu <hjl.tools@gmail.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Suresh Siddha 提交于
Add the xstate regset support which helps extend the kernel ptrace and the core-dump interfaces to support AVX state etc. This regset interface is designed to support all the future state that gets supported using xsave/xrstor infrastructure. Looking at the memory layout saved by "xsave", one can't say which state is represented in the memory layout. This is because if a particular state is in init state, in the xsave hdr it can be represented by bit '0'. And hence we can't really say by the xsave header wether a state is in init state or the state is not saved in the memory layout. And hence the xsave memory layout available through this regset interface uses SW usable bytes [464..511] to convey what state is represented in the memory layout. First 8 bytes of the sw_usable_bytes[464..467] will be set to OS enabled xstate mask(which is same as the 64bit mask returned by the xgetbv's xCR0). The note NT_X86_XSTATE represents the extended state information in the core file, using the above mentioned memory layout. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100211195614.802495327@sbs-t61.sc.intel.com> Signed-off-by: NHongjiu Lu <hjl.tools@gmail.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Do not falsely trigger kerneloops
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: Make cciss_seq_show handle holes in the h->drv[] array cfq-iosched: split seeky coop queues after one slice
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix the mapping of the NFSERR_SERVERFAULT error NFS: Remove a redundant check for PageFsCache in nfs_migrate_page() NFS: Fix a bug in nfs_fscache_release_page()
-
git://git.infradead.org/users/cbou/battery-2.6.33由 Linus Torvalds 提交于
* git://git.infradead.org/users/cbou/battery-2.6.33: wm97xx_battery: Handle missing platform data gracefully
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Obtain proper host structure during response-queue processing. [SCSI] compat_ioct: fix bsg SG_IO [SCSI] qla2xxx: make msix interrupt handler safe for irq [SCSI] zfcp: Report FC BSG errors in correct field [SCSI] mptfusion : mptscsih_abort return value should be SUCCESS instead of value 0.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - make sure we don't schedule reconnects after cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (30 commits) vgaarb: fix incorrect dereference of userspace pointer. drm/radeon/kms: retry auxch on 0x20 timeout value. drm/radeon: Skip dma copy test in benchmark if card doesn't have dma engine. drm/vmwgfx: Fix a circular locking dependency bug. drm/vmwgfx: Drop scanout flag compat and add execbuf ioctl parameter members. Bumps major. drm/vmwgfx: Report propper framebuffer_{max|min}_{width|height} drm/vmwgfx: Update the user-space interface. drm/radeon/kms: fix screen clearing before fbcon. nouveau: fix state detection with switchable graphics drm/nouveau: move dereferences after null checks drm/nv50: make the pgraph irq handler loop like the pre-nv50 version drm/nv50: delete ramfc object after disabling fifo, not before drm/nv50: avoid unloading pgraph context when ctxprog is running drm/nv50: align size of buffer object to the right boundaries. drm/nv50: disregard dac outputs in nv50_sor_dpms() drm/nv50: prevent multiple init tables being parsed at the same time drm/nouveau: make dp auxch xfer len check for reads only drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50 drm/nouveau: Add proper vgaarb support. drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: drivers/dma: Correct NULL test async-tx: fix buffer submission error handling in ipu_idma.c dmaengine: correct onstack wait_queue_head declaration ioat: fix infinite timeout checking in ioat2_quiesce dmaengine: fix memleak in dma_async_device_unregister
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Don't probe reserved EntryHi bits. MIPS: SNI: Correct NULL test MIPS: Fix __devinit __cpuinit confusion in cpu_cache_init MIPS: IP27: Make defconfig useful again. MIPS: Fixup of the r4k timer
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cm: Revert association of an RDMA device when binding to loopback
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs x86-32: Make AT_VECTOR_SIZE_ARCH=2 x86/agp: Fix amd64-agp module initialization regression x86, doc: Fix minor spelling error in arch/x86/mm/gup.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix thinko in previous change. sparc: Align clone and signal stacks to 16 bytes.
-
由 Michael Neuling 提交于
When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea3 ("mm: variable length argument support") and unmasked by fc63cf23 ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andreas Schwab 提交于
This is used by tcgetsid(3). Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rishikesh 提交于
Change the LTP maintainer responsibities from 2010. Ref: http://marc.info/?l=ltp-list&m=126502242912536&w=2 Signed-off-by : Rishikesh K Rajak <risrajak@linux.vnet.ibm.com> Cc: Subrata Modak <subrata@linux.vnet.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Garrett Cooper <yanegomi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Tyser 提交于
Some unused, unsupported debug code existed in the mpc85xx EDAC driver that resulted in a build failure when CONFIG_EDAC_DEBUG was defined: drivers/edac/mpc85xx_edac.c: In function 'mpc85xx_mc_err_probe': drivers/edac/mpc85xx_edac.c:1031: error: implicit declaration of function 'edac_mc_register_mcidev_debug' drivers/edac/mpc85xx_edac.c:1031: error: 'debug_attr' undeclared (first use in this function) drivers/edac/mpc85xx_edac.c:1031: error: (Each undeclared identifier is reported only once drivers/edac/mpc85xx_edac.c:1031: error: for each function it appears in.) Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Tyser 提交于
Commit b4846251 ("edac: mpc85xx add mpc83xx support") accidentally broke how a chip select's first and last page addresses are calculated. The page addresses are being shifted too far right by PAGE_SHIFT. This results in errors such as: EDAC MPC85xx MC1: Err addr: 0x003075c0 EDAC MPC85xx MC1: PFN: 0x00000307 EDAC MPC85xx MC1: PFN out of range! EDAC MC1: INTERNAL ERROR: row out of range (4 >= 4) EDAC MC1: CE - no information available: INTERNAL ERROR The vaule of PAGE_SHIFT is already being taken into consideration during the calculation of the 'start' and 'end' variables, thus it is not necessary to account for it again when setting a chip select's first and last page address. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Kristell 提交于
This patch fixes a bug in the multiblock write tests where the written data is read back for verifying one block at a time. The tests in mmc_test assumes that all cards are byte addressable. This will cause the multi block write tests to fail, leading the user of the mmc_test driver thinking there is something wrong with the sdhci driver they are testing. The start address for the block is calculated as: blocknum * 512. For block addressable cards the blocknum alone should be used. Signed-off-by: NJohan Kristell <johan.kristell@axis.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marcel Selhorst 提交于
When suspending, tpm_infineon calls the generic suspend function of the TPM framework. However, the TPM framework does not return and the system hangs upon suspend. When sending the necessary command "TPM_SaveState" directly within the driver, suspending and resuming works fine. Signed-off-by: NMarcel Selhorst <m.selhorst@sirrix.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.32.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Should mask stack with 0xf not "0x15". Noticed by Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Borislav Petkov 提交于
An unfortunate "WARNING" in the message amd64_edac dumps when the system doesn't support DRAM ECC or ECC checking is not enabled in the BIOS used to trigger kerneloops which qualified the message as an OOPS thus misleading the users. See, e.g. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/422536 http://bugzilla.kernel.org/show_bug.cgi?id=15238 Downgrade the message level to KERN_NOTICE and fix the formulation. Cc: stable@kernel.org # .32.x Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Acked-by: NDoug Thompson <dougthompson@xmission.com>
-
- 11 2月, 2010 17 次提交
-
-
由 Andy Getzendanner 提交于
This patch corrects a userspace pointer dereference in the VGA arbiter in 2.6.32.1. copy_from_user() is used at line 822 to copy the contents of buf into kbuf, but a call to strncmp() on line 964 uses buf rather than kbuf. This problem led to a GPF in strncmp() when X was started on my x86_32 systems. X triggered the behavior with a write of "target PCI:0000:01:00.0" to /dev/vga_arbiter. The patch has been tested against 2.6.32.1 and observed to correct the GPF observed when starting X or manually writing the string "target PCI:0000:01:00.0" to /dev/vga_arbiter. Signed-off-by: NAndy Getzendanner <james.getzendanner@students.olin.edu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* 'drm-radeon-linus' of ../drm-next: drm/radeon/kms: retry auxch on 0x20 timeout value. drm/radeon: Skip dma copy test in benchmark if card doesn't have dma engine. drm/radeon/kms: fix screen clearing before fbcon. drm/radeon/kms: add quirk for VGA without DDC on rv730 XFX card. drm/radeon/kms: don't crash if no DDC bus on VGA/DVI connector. drm/radeon/kms: change Kconfig text to reflect the new option. drm/radeon/kms: suspend and resume audio stuff
-
由 Dave Airlie 提交于
ATOM appears to return 0x20 which seems to mean some sort of timeout. retry the transaction up to 10 times before failing, this makes DP->VGA convertor we bought work at least a bit more predictably. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Pauli Nieminen 提交于
radeon_copy_dma is only available for r200 or newer cards. Call to radeon_copy_dma would result to NULL pointer dereference if benchmarking asic without dma engine. Signed-off-by: NPauli Nieminen <suokkos@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of /home/airlied/kernel/drm-next: nouveau: fix state detection with switchable graphics drm/nouveau: move dereferences after null checks drm/nv50: make the pgraph irq handler loop like the pre-nv50 version drm/nv50: delete ramfc object after disabling fifo, not before drm/nv50: avoid unloading pgraph context when ctxprog is running drm/nv50: align size of buffer object to the right boundaries. drm/nv50: disregard dac outputs in nv50_sor_dpms() drm/nv50: prevent multiple init tables being parsed at the same time drm/nouveau: make dp auxch xfer len check for reads only drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50 drm/nouveau: Add proper vgaarb support. drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard. drivers/gpu/drm/nouveau/nouveau_grctx.c: correct NULL test drm/nouveau: call ttm_bo_wait with the bo lock held to prevent hang drm/nouveau: Fixup semaphores on pre-nv50 cards. drm/nouveau: Add getparam to get available PGRAPH units. drm/nouveau: Add module options to disable acceleration. drm/nouveau: fix non-vram notifier blocks
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Even if this bumps the version to 1 it does not mean the driver is out of staging. From what we know this is the last backwards incompatible change to the driver. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
When time-based throttling is implemented, we need to bump minor. When the old way of detecting scanout is removed, we need to bump major. In the meantime, this change should not break existing user-space. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This memset_io was added to debug something way back and got left behind, memset the fb to black so the borders don't be all white. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Matthew Garrett 提交于
Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 David Daney 提交于
The patch that adds cpu_probe_vmbits is erroneously writing to reserved bit 12. Since we are really only probing high bits, don't write this bit with a one. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Guenter Roeck <guenter.roeck@ericsson.com> Patchwork: http://patchwork.linux-mips.org/patch/949/Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Julia Lawall 提交于
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/945/Acked-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
cpu_cache_init and the things it calls should all be __cpuinit instead of __devinit. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/938/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
RTC support was rewritten but the defconfig files were not updated. Enable IPv6 support which for some folks already is a must have. Assign useful values to other new options. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
As reported by Maxime Bizon, the commit "MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs" have broken the r4k timer since it didn't initialize the cp0_compare_irq_shift variable used in c0_compare_int_pending() on the architectures whose cpu_has_mips_r2 is false. This patch fixes it via initializing the cp0_compare_irq_shift as the cp0_compare_irq used in the old c0_compare_int_pending(). Reported-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: David VomLehn <dvomlehn@cisco.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/922/Tested-by: NShane McDonald <mcdonald.shane@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-