- 02 11月, 2009 1 次提交
-
-
由 Ralf Baechle 提交于
Some firmware may pass well over 256 bytes these days. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 11月, 2009 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: fix wireless drivers depends Staging: wireless drivers Kconfig change Staging: android: mark subsystem as broken Staging: remove stlc45xx driver Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload Staging: vt6656: fix the memory free bug in vntwusb_disconnect() Staging: Panel: prevent driver from calling misc_deregister twice on same ressource Staging: hv: fix oops in vmbus - missing #include Staging: hv: fix oops in vmbus - netvsc list_head Staging: hv: fix oops in vmbus - udev events Staging: hv: Fix vmbus load hang caused by faulty data packing Staging: hv: Fix null pointer error after vmbus loading Staging: hv TODO patches
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fsl_udc_core: Fix kernel oops on module removal USB: option: TLAYTECH TUE800 support USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set USB: serial: sierra driver autopm fixes USB: serial: sierra driver send_setup() autopm fix USB: rndis_host: debug info clobbered before it is logged
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: Mark generic_serial users as BROKEN
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Documentation: ABI: /sys/devices/system/cpu/cpu#/node Documentation: ABI: /sys/devices/system/cpu/cpuidle/ Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files Documentation: ABI: /sys/devices/system/cpu/ topology files Documentation: ABI: document /sys/devices/system/cpu/ Documentation: ABI: rename sysfs-devices-cache_disable properly Driver core: allow certain drivers prohibit bind/unbind via sysfs Driver core: fix driver_register() return value
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] smp: fix sigp sense handling [S390] smp: fix sigp stop handling [S390] cputime: fix overflow on 31 bit systems [S390] call home: fix string length handling [S390] call home: fix error handling in init function [S390] smp: fix prefix handling of offlined cpus [S390] s/r: cmm resume fix [S390] call home: fix local buffer usage in proc handler
-
git://git.kernel.org/pub/scm/fs/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs: xfs: fix xfs_quota remove error xfs: free temporary cursor in xfs_dialloc
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: async_tx: fix asynchronous raid6 recovery for ddf layouts async_pq: rename scribble page async_pq: kill a stray dma_map() call and other cleanups md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning raid6/async_tx: handle holes in block list in async_syndrome_val md/async: don't pass a memory pointer as a page pointer. md: Fix handling of raid5 array which is being reshaped to fewer devices. md: fix problems with RAID6 calculations for DDF. md/raid456: downlevel multicore operations to raid_run_ops md: drivers/md/unroll.pl replaced with awk analog md: remove clumsy usage of do_sync_mapping_range from bitmap code md: raid1/raid10: handle allocation errors during array setup. md/raid5: initialize conf->device_lock earlier md/raid1/raid10: add a cond_resched Revert "md: do not progress the resync process if the stripe was blocked"
-
由 OGAWA Hirofumi 提交于
Commit ef7562b7 ("dpt_i2o: Fix up copy*user") had a silly typo: EINVAL should be -EINVAL. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: stable@kernel.org Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Don't pass NULL pointers to fput() in the error handling paths of the NOMMU do_mmap_pgoff() as it can't handle it. The following can be used as a test program: int main() { static long long a[1024 * 1024 * 20] = { 0 }; return a;} Without the patch, the code oopses in atomic_long_dec_and_test() as called by fput() after the kernel complains that it can't allocate that big a chunk of memory. With the patch, the kernel just complains about the allocation size and then the program segfaults during execve() as execve() can't complete the allocation of all the new ELF program segments. Reported-by: NRobin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NRobin Getz <rgetz@blackfin.uclinux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 10月, 2009 29 次提交
-
-
由 Alex Chiang 提交于
Describe NUMA node symlink created for CPUs when CONFIG_NUMA is set. Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Document cpuidle sysfs attributes by reading code, Documentation/cpuidle/, and git logs. Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Document sched_[mc|smt]_power_savings by reading existing code and git logs. Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list /sys/devices/system/cpu/cpu#/topology/physical_package_id /sys/devices/system/cpu/cpu#/topology/thread_siblings /sys/devices/system/cpu/cpu#/topology/thread_siblings_list The descriptions in Documentation/cputopology.txt weren't very informative, so I attempted a better description based on code reading and hopeful guessing. Updated Documentation/cputopology.txt with the better descriptions and fixed some style issues. Cc: Mike Travis <travis@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/kernel_max /sys/devices/system/cpu/offline /sys/devices/system/cpu/online /sys/devices/system/cpu/possible /sys/devices/system/cpu/present Excerpted the relevant information from Documentation/cputopology.txt and pointed back to cputopology.txt as the authoritative source of information. Cc: Mike Travis <travis@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
This interface has been around for a long time, but hasn't been officially documented. Document the top level sysfs directory for CPU attributes. Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Rename sysfs-devices-cache_disable to sysfs-devices-system-cpu, in order to keep a stricter correlation between a sysfs directory and its documentation. Reported-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Torokhov 提交于
Platform drivers registered via platform_driver_probe() can be bound to devices only once, upon registration, because discard their probe() routines to save memory. Unbinding the driver through sysfs 'unbind' leaves the device stranded and confuses users so let's not create bind and unbind attributes for such drivers. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stas Sergeev 提交于
In this patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c the check was added for another driver to already claim the same device on the same bus. But the returned error code was wrong: to modprobe, the -EEXIST means that _this_ driver is already installed. It therefore doesn't produce the needed error message when _another_ driver is trying to register for the same device. Returning -EBUSY fixes the problem. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Anton Vorontsov 提交于
fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: Li Yang <leoli@freescale.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bryan Wu 提交于
Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: NBryan Wu <bryan.wu@canonical.com> Acked-By: NMatthias Urlichs <matthias@urlichs.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Elina Pasheva 提交于
This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Elina Pasheva 提交于
This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Tested-by: NMatthew Safar <msafar@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 George Nassar 提交于
The MTU throttle-down if a RNDIS device doesn't support a particular packet size is being incorrectly logged. The attempted packet size is being clobbered before it gets logged. First patch; please inform if I'm doing this incorrectly. Diff'd against latest official source as per the FAQ; forward port to current git version is straightforward. Signed-off-by: NGeorge Nassar <george.nassar@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
These drivers can (erroneously) be enabled even when CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc. Stop this. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Change the wireless drivers to depend on CONFIG_WLAN instead of CONFIG_WLAN_80211 which is going away soon. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
It's causing lots of build errors, so just mark it as broken. It is scheduled to be removed in 2.6.33 anyway. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
It's no longer needed as the p54spi driver is the same thing, under a different name and in the correct portion of the kernel tree. Cc: Javier Martinez Canillas <martinez.javier@gmail.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
On rtl81* additions, they had its wireless stack made builtin instead of separated modules. But try_module_get/module_put in stack were kept, they are uneeded with the stack builtin and makes rtl81* modules impossible to remove on a system with an rtl81* card. request_module calls are also uneeded with stack builtin, so remove them too. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 miaofng 提交于
This patch is used to solve the memory bug when people plug out the wusb card then plug in. Error logs are following: root@smdk2440:~# ifdown eth1 AP deauthed me, reason=2. Config_FileOperation file Not exist Zone=[1][J][P]!! WPA: Terminating root@smdk2440:~# ----> !!!!!!!!!!!!!!here plug out the wusbcard usb 1-1: USB disconnect, address 4 ----> !!!!!!!!!!!!!!!!!!!here plug in the wusb card usb 1-1: new full speed USB device using s3c2410-ohci and address 5 usb 1-1: New USB device found, idVendor=160a, idProduct=3184 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter usb 1-1: Manufacturer: VIA Networking Technologies, Inc. usb 1-1: configuration #1 chosen from 1 choice VIA Networking Wireless LAN USB Driver Ver. 1.19_12 Copyright (c) 2004 VIA Networking Technologies, Inc. kernel BUG at mm/slab.c:2974! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT Modules linked in: vt6656_stage CPU: 0 Not tainted (2.6.32-rc2 #14) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<c002fb10>] lr : [<c002fb0c>] psr: 40000093 sp : c3867c68 ip : c3867bd0 fp : c3866000 r10: c3800600 r9 : c3802430 r8 : 00000004 r7 : c3802428 r6 : c3802660 r5 : c3802420 r4 : a0000013 r3 : 00000000 r2 : c3866000 r1 : 00000003 r0 : 00000024 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: 330a8000 DAC: 00000017 Process khubd (pid: 152, stack limit = 0xc3866270) Stack: (0xc3867c68 to 0xc3868000) 7c60: c0093fdc c0094088 000000d0 000000d0 00000000 000080d0 7c80: 00000000 a0000013 c39ebec0 c3800600 000080d0 00000001 c03f13cc 00000006 7ca0: c02b36f0 c0094574 c0043428 0001c9de c39ebec0 c39ebea0 c3000c00 c02a6a84 7cc0: 89705f41 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7ce0: 00000000 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7d00: 00000000 bf003398 c00aa514 c3867d20 0000a1ff c00e1448 c39d9f84 c39aabe8 7d20: c3867d50 c00e1888 c39aabe8 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d40: 0000bec8 01000000 00000000 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d60: c39ebec8 00000000 00000000 c0223798 c39ebec0 c01daa14 bf036eec c3867da0 7d80: c045a4f8 c01da6e4 c39ebec0 00000000 c01daa14 c39ebec0 c3867da0 c01d9870 7da0: c38331a8 c39fcb94 c005b3b4 c39ebec0 c39ebec0 c39ebef4 00000000 c01da890 7dc0: c39ebec0 c39ebec0 c3000c00 c01d97f4 00000000 c01d8470 c39ebea0 c3000c68 7de0: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c39ebec0 c39ebea0 c3000c00 7e00: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c0221ee8 00000001 00000000 7e20: 00000000 00000000 00001388 00000000 c3000c04 c3000c68 c3bc29c0 00000001 7e40: c3bc29c4 00000001 c03f4af8 00000000 c39fe780 c3000c00 00000001 c045ab04 7e60: c3867eb8 c045a3bc c3000c70 00000000 00000000 c0229238 c3000c68 c0223210 7e80: c3000c00 c045aaf0 c045ab04 c0223230 c3000c68 c01daa14 c045ab04 c01da6e4 7ea0: c3000c68 00000000 c01daa14 c3000c68 c3867eb8 c01d9870 c38331a8 c3862f54 7ec0: c005b3b4 c3000c68 c3000c68 c3000c9c 00000002 c01da890 c3867ef9 c3000c68 7ee0: c3829f60 c01d97f4 00000000 c01d8470 c38918e0 c3aaf468 39383102 c300343a 7f00: 00000001 c0219660 c03f1768 c3000c00 00000000 c3000c68 00000002 c3aaf814 7f20: 00000001 00000101 c38918e0 c021b6e0 00000002 00000000 00000000 c3000c00 7f40: c38917c0 c021c418 00000064 00000064 00000101 c3867f60 c005b920 c3867f94 7f60: c3891830 c3aaf400 c3866000 c3aaf400 c3aaf800 00000000 c38918e0 c3aaf400 7f80: 00000012 00000000 00000000 c3837920 c00574a0 c3867f94 c3867f94 00000101 7fa0: 01010001 c3867fd4 c381bf48 c3867fd4 c381bf48 00000000 c021ba3c 00000000 7fc0: 00000000 00000000 00000000 c00573dc 00000000 00000000 c3867fd8 c3867fd8 7fe0: 00000000 00000000 00000000 00000000 00000000 c002ce88 00000000 ffff0000 [<c002fb10>] (__bug+0x1c/0x28) from [<c0094088>] (cache_alloc_refill+0x13c/0x594) [<c0094088>] (cache_alloc_refill+0x13c/0x594) from [<c0094574>] (__kmalloc+0x94/0xd0) [<c0094574>] (__kmalloc+0x94/0xd0) from [<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0) [<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0) from [<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage]) [<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage]) from [<c0223798>] (usb_probe_interface+0x130/0x180) [<c0223798>] (usb_probe_interface+0x130/0x180) from [<c01da6e4>] (driver_probe_device+0xac/0x164) [<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90) [<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68) [<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54) [<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0) [<c01d8470>] (device_add+0x3b4/0x4f0) from [<c0221ee8>] (usb_set_configuration+0x524/0x5b8) [<c0221ee8>] (usb_set_configuration+0x524/0x5b8) from [<c0229238>] (generic_probe+0x5c/0xa0) [<c0229238>] (generic_probe+0x5c/0xa0) from [<c0223230>] (usb_probe_device+0x48/0x54) [<c0223230>] (usb_probe_device+0x48/0x54) from [<c01da6e4>] (driver_probe_device+0xac/0x164) [<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90) [<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68) [<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54) [<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0) [<c01d8470>] (device_add+0x3b4/0x4f0) from [<c021b6e0>] (usb_new_device+0x100/0x174) [<c021b6e0>] (usb_new_device+0x100/0x174) from [<c021c418>] (hub_thread+0x9dc/0xeec) [<c021c418>] (hub_thread+0x9dc/0xeec) from [<c00573dc>] (kthread+0x78/0x80) [<c00573dc>] (kthread+0x78/0x80) from [<c002ce88>] (kernel_thread_exit+0x0/0x8) Code: e1a01000 e59f000c eb005014 e3a03000 (e5833000) ---[ end trace 2a51e0dbab9e4fbe ]--- note: khubd[152] exited with preempt_count 1 Signed-off-by: Nmiaofng <miaofng@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Huewe 提交于
This patch prevents the driver from calling misc_deregister twice on the same ressouce when unloading the driver. Unloading the driver without this patch results in a Kernel BUG like this: Panel driver version 0.9.5 registered on parport0 (io=0x378). BUG: unable to handle kernel paging request at 0000000000100108 IP: [<ffffffff803c02ee>] misc_deregister+0x2d/0x90 PGD 6caff067 PUD 762b7067 PMD 0 Oops: 0002 [#1] PREEMPT SMP last sysfs file: /sys/devices/platform/w83627hf.656/in8_input ... This patch fixes this issue, although maybe not in the best way possible :) linux version v2.6.32-rc1 - linus git tree, Di 29. Sep 01:10:18 CEST 2009 Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Dadok 提交于
Add missing #includes to make hv module compile successfull. Signed-off-by: NMilan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Dadok 提交于
Remove incorrect list_head usage. Variable of type list_head was used in some function's arguments as list item. Signed-off-by: NMilan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Dadok 提交于
Fix typos in udev event send and guid variables copy Signed-off-by: NMilan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hank Janssen 提交于
Fix vmbus load hang caused by wrong data packing. Signed-off-by: Hank Janssen<hjanssen@microsoft.com> Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Haiyang Zhang 提交于
Fix null pointer error after vmbus loading. Remove code that checks for dev_name, the affected structure is kzalloc-ed prior to this routine, so it is always null at this stage. Signed-off-by: NHank Janssen <hjanssen@microsoft.com> Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Hemminger 提交于
Update for more items Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com>. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
There isn't much else I can do with these. I can find no hardware for any of them and no users. The code is broken. Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 10月, 2009 1 次提交
-
-
由 Ryota Yamauchi 提交于
The xfs_quota returns ENOSYS when remove command is executed. Reproducable with following steps. # mount -t xfs -o uquota /dev/sda7 /mnt/mp1 # xfs_quota -x -c off -c remove XFS_QUOTARM: Function not implemented. The remove command is allowed during quotaoff, but xfs_fs_set_xstate() checks whether quota is running, and it leads to ENOSYS. To solve this problem, add a check for X_QUOTARM. Signed-off-by: NRyota Yamauchi <r-yamauchi@vf.jp.nec.com> Signed-off-by: NUtako Kusaka <u-kusaka@wm.jp.nec.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-