- 26 6月, 2013 4 次提交
-
-
由 Nicolas Ferre 提交于
We are using this function, now that we have introduced the support for UTMI clock for computing the USB host rate. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NBo Shen <voice.shen@atmel.com>
-
由 Nicolas Ferre 提交于
at91sam9n12 has Full-speed only USB. So we should add it to the list in at91_pllb_usbfs_clock_init() function. Moreover, at91sam9n12 has an unusual PMC in the sense that it has a PLLB but also has a USB clock register. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NBo Shen <voice.shen@atmel.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NBo Shen <voice.shen@atmel.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com>
-
- 21 6月, 2013 2 次提交
-
-
由 Daniel Lezcano 提交于
The following commit: commit 7e348b90 Author: Robert Lee <rob.lee@linaro.org> Date: Tue Mar 20 15:22:43 2012 -0500 ARM: at91: Consolidate time keeping and irq enable Enable core cpuidle timekeeping and irq enabling and remove that handling from this code. introduced an additional zero to the state1 (suspend) target residency. With a periodic tick, the cpu never enters the state1 with both 10000 and 100000. With a tickless system, it enters to state1 much more often with the initial value, roughly x7 more. Fix it by setting the value to 10ms again. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> [nicola.ferre@atmel.com: add precisions given by Daniel to commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Since 4b68520dc0ec96153bc0d87bca5ffba508edfcf ARM: at91: add AIC5 support we allocate the at91_extern_irq. This patch makes it static and stores the non-dt extern irq in the soc structure. It is then possible to use a at91_get_extern_irq() function to get the value for outside of the irq driver. It is useful for passing its value to at91_aic_init(). Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: rework commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 18 6月, 2013 2 次提交
-
-
由 Wenyou Yang 提交于
Because MT_DEVICE is not executable in armv7, we change the internal SRAM memory type to MT_MEMORY_NONCACHED. As it seems that caching this internal SRAM memory is not necessary, we chose the this memory type. Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
Fixes: arch/arm/mach-at91/built-in.o: In function `ksz9021rn_phy_fixup': :(.text+0x1174): undefined reference to `mdiobus_write' :(.text+0x1188): undefined reference to `mdiobus_write' :(.text+0x119c): undefined reference to `mdiobus_write' :(.text+0x11b0): undefined reference to `mdiobus_write' arch/arm/mach-at91/built-in.o: In function `sama5_dt_device_init': :(.init.text+0x1e34): undefined reference to `phy_register_fixup_for_uid' when CONFIG_PHYLIB is not selected. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 24 5月, 2013 2 次提交
-
-
由 Josh Wu 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 15 5月, 2013 1 次提交
-
-
since commit 838a2ae8 Author: Shawn Guo <shawn.guo@linaro.org> Date: Sat Jan 12 11:50:05 2013 +0000 ARM: use clockevents_config_and_register() where possible The timer is wrongly configured and result in a nice crash so revert it on rm9200 timer. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> # 3.8+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 24 4月, 2013 1 次提交
-
-
由 Richard Genoud 提交于
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> [<wenyou.yang@atmel.com: declare the spi clocks for sam9260, at91sam9g45, and at91sam9n12] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 4月, 2013 2 次提交
-
-
由 Daniel Lezcano 提交于
Remove the duplicated code and use the cpuidle common code for initialization. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Daniel Lezcano 提交于
The en_core_tk_irqen flag is set in all the cpuidle driver which means it is not necessary to specify this flag. Remove the flag and the code related to it. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> # for mach-omap2/* Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 18 4月, 2013 1 次提交
-
-
由 Arnd Bergmann 提交于
For the past three years, we have had a #warning in mach-at91 about the sdram_selfrefresh_enable or at91sam9_standby functions possibly not working on at91sam9263. In the meantime a function was added to do the right thing on at91sam9g45, which looks like it should also work on '9263. Signed-off-by: NArnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: remove paragraph in commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
-
- 09 4月, 2013 1 次提交
-
-
由 Nicolas Ferre 提交于
An AT91 SoC that doesn't have a subtype is shown as "Unknown" in the Linux log message which is not correct. This was leading to confusion so, add a "none" qualifier to the subtype property and set this one in the appropriate cases. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 08 4月, 2013 2 次提交
-
-
由 Johan Hovold 提交于
Remove trailing semicolon from register-access macros. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Johan Hovold 提交于
Fix a few trivial typos in panic, warning and debug messages. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 03 4月, 2013 1 次提交
-
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 27 3月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NMarc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
- 26 3月, 2013 5 次提交
-
-
由 Maxime Ripard 提交于
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.4+
-
由 Ludovic Desroches 提交于
This patch introduces the SAMA5 support and a generic board file for SAMA5 devices. It also updates the PMC driver to manage clock division which is a requirement since some peripherals can't work at the bus frequency on SAMA5. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
As we will introduce SAMA5, we need to distinguish the core architecture. It is useless to show ARMv4/5 entries if we are configuring a kernel for SAMA5 devices. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
No more associate at91sam926x_time.c compilation with SOC_AT91SAM9 entry since SAMA5D3 devices will use this driver too. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
New devices are no more prefixed with at91 so remove the at91 and _name concatenation. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 21 3月, 2013 1 次提交
-
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 14 3月, 2013 5 次提交
-
-
由 Ludovic Desroches 提交于
Fix an infinite loop when suspending or resuming a device with AIC5. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
gpio suspend/resume and wakeup sources where not managed when using pinctrl so it was impossible to wake up the system with a gpio. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Rename the board-rm9200-dt.c file so that we follow the pattern for Device Tree board files: board-dt-<name of SoC sharing same core>.c Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: modify commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
We will produce a board-dt file per SoC core type. That will ease code readability and will prevent from including superfluous code for supporting machines that will never be compiled together (particularly the ARM9 and C-A5 upcoming SoCs). Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: modify commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This is the legacy platform support Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 13 3月, 2013 3 次提交
-
-
由 Johan Hovold 提交于
Add platform device-id table in order to identify the controller and determine its configuration. The currently used configuration parameters are: have_alt_pixclock - SOC uses an alternate pixel-clock calculation formula (at91sam9g45 non-ES) have_hozval - SOC has a HOZVAL field in LCDFRMCFG which is used to determine the linesize for STN displays (at91sam9261, at921sam9g10 and at32ap) have_intensity_bit - SOC uses IBGR:555 rather than BGR:565 16-bit pixel layout (at91sam9261, at91sam9263 and at91sam9rl) This allows us to remove all the remaining uses of cpu_is macros from the driver. Tested on at91sam9263 and at91sam9g45, compile-tested for other AT91-SOCs, and untested for AVR32. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Johan Hovold 提交于
Add hclk entry for the atmel_lcdfb bus clock. On at91sam9261, at91sam9g10 and at32ap the bus clock has to be enabled as well as the peripheral clock. Add the appropriate lookup entries to these SOCs and fake clocks to the SOCs that do not use it. This allows us to get rid of the conditional enabling of the clocks in the driver which relied on the cpu_is macros. Tested on at91sam9263 and at91sam9g45, compile-tested for other AT91-SOCs, and untested for AVR32. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Johan Hovold 提交于
Fix regression introduced by commit d2323cf7 ("onewire: w1-gpio: add ext_pullup_enable pin in platform data") which added a gpio entry to the platform data, but did not add the required initialisers to the board files using it. Consequently, the driver would request gpio 0 at probe, which could break other uses of the corresponding pin. On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for instance, breaks SPI0 on at91sam9g20. Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 3月, 2013 1 次提交
-
-
由 Nicolas Royer 提交于
Only AES use DMA in AT91SAM9G45 (TDES and SHA use PDC). However latest Atmel TDES and SHA IP releases use DMA instead of PDC. --> Atmel TDES and SHA drivers need DMA platform data for those IP releases. Goal of this patch is to use the same platform data structure for all Atmel crypto peripherals. This structure contains information about DMA interface. Signed-off-by: NNicolas Royer <nicolas@eukrea.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NEric Bénard <eric@eukrea.com> Tested-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 08 2月, 2013 1 次提交
-
-
由 Nicolas Ferre 提交于
The board is not available anymore and it seems its use is very limited. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAlexandre Belloni <abelloni@adeneo-embedded.com>
-
- 07 2月, 2013 2 次提交
-
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 23 1月, 2013 1 次提交
-
-
Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772f (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.3] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 15 1月, 2013 1 次提交
-
-
由 Joachim Eastwood 提交于
After "ARM: delete struct sys_timer" board-rm9200-dt fails compilation with the following error: CC arch/arm/mach-at91/board-rm9200-dt.o arch/arm/mach-at91/board-rm9200-dt.c:50:2: error: unknown field 'timer' specified in initializer arch/arm/mach-at91/board-rm9200-dt.c:50:13: error: 'at91rm9200_timer' undeclared here (not in a function) make[1]: *** [arch/arm/mach-at91/board-rm9200-dt.o] Error 1 make: *** [arch/arm/mach-at91] Error 2 This is a fall out from the timer conversion. Fix it by converting board-rm9200-dt to use new timer init function as well. Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-