Because the EFI memory map are converted to e820 memory map in bootloader, the
EFI memory map handling code is removed to clean up.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some code reformatting in init_32.c.  No functional change.
Signed-off-by: NJeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Denys Fedoryshchenko reported a bootup crash when he upgraded
his system from 3GB to 4GB RAM:

   http://lkml.org/lkml/2008/1/7/9

the bug is due to HIGHMEM4G && SPARSEMEM kernels making pfn_to_page()
to return an invalid pointer when the pfn is in a memory hole. The
256 MB PCI aperture at the end of RAM was not mapped by sparsemem,
and hence the pfn was not valid. But set_highmem_pages_init() iterated
this range without checking the pfn's validity first.

this bug was probably present in the sparsemem code ever since sparsemem
has been introduced in v2.6.13. It was masked due to HIGHMEM64G using
larger memory regions in sparsemem_32.h:

 #ifdef CONFIG_X86_PAE
 #define SECTION_SIZE_BITS       30
 #define MAX_PHYSADDR_BITS       36
 #define MAX_PHYSMEM_BITS        36
 #else
 #define SECTION_SIZE_BITS       26
 #define MAX_PHYSADDR_BITS       32
 #define MAX_PHYSMEM_BITS        32
 #endif

which creates 1GB sparsemem regions instead of 64MB sparsemem regions.
So in practice we only ever created true sparsemem holes on x86 with
HIGHMEM4G - but that was rarely used by distros.

( btw., we could probably save 2MB of mem_map[]s on X86_PAE if we reduced
  the sparsemem region size to 256 MB. )
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>

if CONFIG_PAGEALLOC is enabled then X86_FEATURE_PSE is disabled and all
the kernel physical RAM pagetables are set up as 4K pages. This is
needed so that CONFIG_PAGEALLOC can do finegrained mapping and unmapping
of pages.

as a side-effect though, the total size of memory allocated as kernel
pagetables increases significantly. All these pagetables are allocated
via alloc_bootmem_low_pages(), straight out of the lowmem DMA pool. If
the system has enough RAM and a large kernel image then almost all of
the 16 MB lowmem DMA pool is allocated to the image and to pagetables -
leaving no space for __GFP_DMA allocations.

this results in drivers failing and the bootup hanging:

 swapper invoked oom-killer: gfp_mask=0x80d1, order=0, oomkilladj=0
  [<4015059f>] out_of_memory+0x17f/0x1c0
  [<40151f3c>] __alloc_pages+0x37c/0x3a0
  [<40168cd7>] slob_new_page+0x37/0x50
  [<40168dff>] slob_alloc+0x10f/0x190
  [<40169010>] __kmalloc_node+0x80/0x90
  [<405a17e3>] scsi_host_alloc+0x33/0x2c0
  [<405a1a82>] scsi_register+0x12/0x60
  [<40d5889e>] aha1542_detect+0x9e/0x940
  [<405c5ba5>] ultrastor_detect+0x265/0x5f0
  [<401352f5>] getnstimeofday+0x35/0xf0
  [<40d58751>] init_this_scsi_driver+0x41/0xf0
  [<40d0b856>] kernel_init+0x136/0x310
  [<40d58710>] init_this_scsi_driver+0x0/0xf0
  [<40d0b720>] kernel_init+0x0/0x310
  [<40105547>] kernel_thread_helper+0x7/0x10
  =======================

the fix is to first allocate from above the DMA pool, and if that fails
(for example due to it being a machine with less than 16 MB of RAM),
allocate from the DMA pool as a fallback.

With this fix applied i was able to boot a PAGEALLOC=y kernel that would
hang before.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The conversion from using a slab cache to quicklist left some residual
dead code.

I note that in the conversion it now always allocates a whole page for
the pgd, rather than the 32 bytes needed for a PAE pgd.  Was this
intended?
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>

Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts most of commit 19d36ccd.

The way to DEBUG_RODATA interactions with KPROBES and CPU hotplug is to
just not mark the text as being write-protected in the first place.
Both of those facilities depend on rewriting instructions.

Having "helpful" debug facilities that just cause more problem is not
being helpful.  It just adds complexity and bugs. Not worth it.
Reported-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.

For ia64, just add a few stubs in anticipation of future
S3 or S4 support.
Signed-off-by: NLen Brown <len.brown@intel.com>

Reenable kprobes and alternative patching when the kernel text is write
protected by DEBUG_RODATA

Add a general utility function to change write protected text.  The new
function remaps the code using vmap to write it and takes care of CPU
synchronization.  It also does CLFLUSH to make icache recovery faster.

There are some limitations on when the function can be used, see the
comment.

This is a newer version that also changes the paravirt_ops code.
text_poke also supports multi byte patching now.

Contains bug fixes from Zach Amsden and suggestions from Mathieu
Desnoyers.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Zach Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Constrain __supported_pte_mask and NX handling to just the PAE kernel.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

__supported_pte_mask is needed when constructing pte values.  Xen
device drivers need to do this to make mappings of foreign pages (ie,
pages granted to us by other domains).
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>

It's useful to know which mm is allocating a pagetable.  Xen uses this
to determine whether the pagetable being added to is pinned or not.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>

Do not mark the kernel text read only if KPROBES is in the kernel;
kprobes needs to hot-patch the kernel text to insert it's
instrumentation.

In this case, only mark the .rodata segment as read only.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Tested-by: NS. P. Prasanna <prasanna@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: William Cohen <wcohen@redhat.com>
Cc: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SLUB cannot run on i386 at this point because i386 uses the page->private and
page->index field of slab pages for the pgd cache.

Make SLUB run on i386 by replacing the pgd slab cache with a quicklist.
Limit the changes as much as possible. Leave the improvised linked list in place
etc etc. This has been working here for a couple of weeks now.
Acked-by: NWilliam Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use SLAB_PANIC and delete duplicated panic().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This was broken.  It adds complexity, for no good reason.  Rather than
separate __pa() and __pa_symbol(), we should deprecate __pa_symbol(),
and preferably __pa() too - and just use "virt_to_phys()" instead, which
is more readable and has nicer semantics.

However, right now, just undo the separation, and make __pa_symbol() be
the exact same as __pa().  That fixes the bugs this patch introduced,
and we can do the fairly obvious cleanups later.

Do the new __phys_addr() function (which is now the actual workhorse for
the unified __pa()/__pa_symbol()) as a real external function, that way
all the potential issues with compile/link-time optimizations of
constant symbol addresses go away, and we can also, if we choose to, add
more sanity-checking of the argument.

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Normally when running in PAE mode, the 4th PMD maps the kernel address space,
which can be shared among all processes (since they all need the same kernel
mappings).

Xen, however, does not allow guests to have the kernel pmd shared between page
tables, so parameterize pgtable.c to allow both modes of operation.

There are several side-effects of this.  One is that vmalloc will update the
kernel address space mappings, and those updates need to be propagated into
all processes if the kernel mappings are not intrinsically shared.  In the
non-PAE case, this is done by maintaining a pgd_list of all processes; this
list is used when all process pagetables must be updated.  pgd_list is
threaded via otherwise unused entries in the page structure for the pgd, which
means that the pgd must be page-sized for this to work.

Normally the PAE pgd is only 4x64 byte entries large, but Xen requires the PAE
pgd to page aligned anyway, so this patch forces the pgd to be page
aligned+sized when the kernel pmd is unshared, to accomodate both these
requirements.

Also, since there may be several distinct kernel pmds (if the user/kernel
split is below 3G), there's no point in allocating them from a slab cache;
they're just allocated with get_free_page and initialized appropriately.  (Of
course the could be cached if there is just a single kernel pmd - which is the
default with a 3G user/kernel split - but it doesn't seem worthwhile to add
yet another case into this code).

[ Many thanks to wli for review comments. ]
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NWilliam Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This patch introduces paravirt_ops hooks to control how the kernel's
initial pagetable is set up.

In the case of a native boot, the very early bootstrap code creates a
simple non-PAE pagetable to map the kernel and physical memory.  When
the VM subsystem is initialized, it creates a proper pagetable which
respects the PAE mode, large pages, etc.

When booting under a hypervisor, there are many possibilities for what
paging environment the hypervisor establishes for the guest kernel, so
the constructon of the kernel's pagetable depends on the hypervisor.

In the case of Xen, the hypervisor boots the kernel with a fully
constructed pagetable, which is already using PAE if necessary.  Also,
Xen requires particular care when constructing pagetables to make sure
all pagetables are always mapped read-only.

In order to make this easier, kernel's initial pagetable construction
has been changed to only allocate and initialize a pagetable page if
there's no page already present in the pagetable.  This allows the Xen
paravirt backend to make a copy of the hypervisor-provided pagetable,
allowing the kernel to establish any more mappings it needs while
keeping the existing ones.

A slightly subtle point which is worth highlighting here is that Xen
requires all kernel mappings to share the same pte_t pages between all
pagetables, so that updating a kernel page's mapping in one pagetable
is reflected in all other pagetables.  This makes it possible to
allocate a page and attach it to a pagetable without having to
explicitly enumerate that page's mapping in all pagetables.

And:

+From: "Eric W. Biederman" <ebiederm@xmission.com>

If we don't set the leaf page table entries it is quite possible that
will inherit and incorrect page table entry from the initial boot
page table setup in head.S.  So we need to redo the effort here,
so we pick up PSE, PGE and the like.

Hypervisors like Xen require that their page tables be read-only,
which is slightly incompatible with our low identity mappings, however
I discussed this with Jeremy he has modified the Xen early set_pte
function to avoid problems in this area.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NWilliam Irwin <bill.irwin@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>

On x86-64, kernel memory freed after init can be entirely unmapped instead
of just getting 'poisoned' by overwriting with a debug pattern.

On i386 and x86-64 (under CONFIG_DEBUG_RODATA), kernel text and bug table
can also be write-protected.

Compared to the first version, this one prevents re-creating deleted
mappings in the kernel image range on x86-64, if those got removed
previously. This, together with the original changes, prevents temporarily
having inconsistent mappings when cacheability attributes are being
changed on such pages (e.g. from AGP code). While on i386 such duplicate
mappings don't exist, the same change is done there, too, both for
consistency and because checking pte_present() before using various other
pte_XXX functions is a requirement anyway. At once, i386 code gets
adjusted to use pte_huge() instead of open coding this.

AK: split out cpa() changes
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Currently __pa_symbol is for use with symbols in the kernel address
map and __pa is for use with pointers into the physical memory map.
But the code is implemented so you can usually interchange the two.

__pa which is much more common can be implemented much more cheaply
if it is it doesn't have to worry about any other kernel address
spaces.  This is especially true with a relocatable kernel as
__pa_symbol needs to peform an extra variable read to resolve
the address.

There is a third macro that is added for the vsyscall data
__pa_vsymbol for finding the physical addesses of vsyscall pages.

Most of this patch is simply sorting through the references to
__pa or __pa_symbol and using the proper one.  A little of
it is continuing to use a physical address when we have it
instead of recalculating it several times.

swapper_pgd is now NULL.  leave_mm now uses init_mm.pgd
and init_mm.pgd is initialized at boot (instead of compile time)
to the physmem virtual mapping of init_level4_pgd.  The
physical address changed.

Except for the for EMPTY_ZERO page all of the remaining references
to __pa_symbol appear to be during kernel initialization.  So this
should reduce the cost of __pa in the common case, even on a relocated
kernel.

As this is technically a semantic change we need to be on the lookout
for anything I missed.  But it works for me (tm).
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The VMI backend uses explicit page type notification to track shadow page
tables.  The allocation of page table roots is especially tricky.  We need to
clone the root for non-PAE mode while it is protected under the pgd lock to
correctly copy the shadow.

We don't need to allocate pgds in PAE mode, (PDPs in Intel terminology) as
they only have 4 entries, and are cached entirely by the processor, which
makes shadowing them rather simple.

For base page table level allocation, pmd_populate provides the exact hook
point we need.  Also, we need to allocate pages when splitting a large page,
and we must release pages before returning the page to any free pool.

Despite being required with these slightly odd semantics for VMI, Xen also
uses these hooks to determine the exact moment when page tables are created or
released.

AK: All nops for other architectures
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

o Fix modpost generated warning.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .text
between 'add_one_highpage_hotplug' (at offset 0xc0113d3f) and 'online_page'
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Fix compile error when config memory hotplug with numa on i386.

The cause of compile error was missing of arch_add_memory(),
remove_memory(), and memory_add_physaddr_to_nid().
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@cs.washington.edu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When using memmap kernel parameter in EFI boot we should also add to memory map
memory regions of runtime services to enable their mapping later.

AK: merged and cleaned up the patch
Signed-off-by: NArtiom Myaskouvskey <artiom.myaskouvskey@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This changes a couple of if() BUG(); constructs to
BUG_ON(); so it can be safely optimized away.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Add a pte_update_hook which notifies about pte changes that have been made
without using the set_pte / clear_pte interfaces.  This allows shadow mode
hypervisors which do not trap on page table access to maintain synchronized
shadows.

It also turns out, there was one pte update in PAE mode that wasn't using any
accessor interface at all for setting NX protection.  Considering it is PAE
specific, and the accessor is i386 specific, I didn't want to add a generic
encapsulation of this behavior yet.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make __FIXADDR_TOP a variable, so that it can be set to not get in the way of
address space a hypervisor may want to reserve.

Original patch by Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I keep seeing zones on various platforms that are never used and wonder why we
compile support for them into the kernel.  Counters show up for HIGHMEM and
DMA32 that are alway zero.

This patch allows the removal of ZONE_DMA32 for non x86_64 architectures and
it will get rid of ZONE_HIGHMEM for arches not using highmem (like 64 bit
architectures).  If an arch does not define CONFIG_HIGHMEM then ZONE_HIGHMEM
will not be defined.  Similarly if an arch does not define CONFIG_ZONE_DMA32
then ZONE_DMA32 will not be defined.

No current architecture uses all the 4 zones (DMA,DMA32,NORMAL,HIGH) that we
have now.  The patchset will reduce the number of zones for all platforms.

On many platforms that do not have DMA32 or HIGHMEM this will reduce the
number of zones by 50%.  F.e.  ia64 only uses DMA and NORMAL.

Large amounts of memory can be saved for larger systemss that may have a few
hundred NUMA nodes.

With ZONE_DMA32 and ZONE_HIGHMEM support optional MAX_NR_ZONES will be 2 for
many non i386 platforms and even for i386 without CONFIG_HIGHMEM set.

Tested on ia64, x86_64 and on i386 with and without highmem.

The patchset consists of 11 patches that are following this message.

One could go even further than this patchset and also make ZONE_DMA optional
because some platforms do not need a separate DMA zone and can do DMA to all
of memory.  This could reduce MAX_NR_ZONES to 1.  Such a patchset will
hopefully follow soon.

This patch:

Fix strange uses of MAX_NR_ZONES

Sometimes we use MAX_NR_ZONES - x to refer to a zone.  Make that explicit.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch replaces the open-coded early commandline parsing
throughout the i386 boot code with the generic mechanism (already used
by ppc, powerpc, ia64 and s390).  The code was inconsistent with
whether it deletes the option from the cmdline or not, meaning some of
these will get passed through the environment into init.

This transformation is mainly mechanical, but there are some notable
parts:

1) Grammar: s/linux never set's it up/linux never sets it up/

2) Remove hacked-in earlyprintk= option scanning.  When someone
   actually implements CONFIG_EARLY_PRINTK, then they can use
   early_param().
[AK: actually it is implemented, but I'm adding the early_param it in the next
x86-64 patch]

3) Move declaration of generic_apic_probe() from setup.c into asm/apic.h

4) Various parameters now moved into their appropriate files (thanks Andi).

5) All parse functions which examine arg need to check for NULL,
   except one where it has subtle humor value.

AK: readded acpi_sci handling which was completely dropped
AK: moved some more variables into acpi/boot.c

Cc: len.brown@intel.com
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>

Move initialization of all memory end variables to as early as
possible, so that dependent code doesn't need to check whether these
variables have already been set.

Change the range check in kunmap_atomic to actually make use of this
so that the no-mapping-estabished path (under CONFIG_DEBUG_HIGHMEM)
gets used only when the address is inside the lowmem area (and BUG()
otherwise).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add __start_rodata and __end_rodata to sections.h to avoid extern
declarations.  Needed by s390 code (see following patch).

[akpm@osdl.org: update architectures]
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Localize poison values into one header file for better documentation and
easier/quicker debugging and so that the same values won't be used for
multiple purposes.

Use these constants in core arch., mm, driver, and fs code.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NMatt Mackall <mpm@selenic.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

flush_tlb_all uses on_each_cpu, which will disable/enable interrupt.
In suspend/resume time, this will make interrupt wrongly enabled.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>