- 12 3月, 2010 6 次提交
-
-
由 Thomas Weber 提交于
The omap_serial_early_init prints the following errors: Could not get uart4_ick Could not get uart4_fck because all the uarts available in omap_uart[] will be initialized. Only omap4430 and omap3630 have 4 uarts at the moment. This patch reduces the number of uarts when cpu is not omap4430 or omap3630. Signed-off-by: NThomas Weber <weber@corscience.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
While waiting for the related USB patch, fix compile by enabling it in the defconfigs. As discussed at: http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460 Otherwise we'll get errors like: drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function) drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once drivers/usb/core/hcd.c:1892: error: for each function it appears in.) Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Recent DMA API changes broke compile for tusb6010. While testing the fixes for tusb6010, I had to update the n8x0 defconfig quite a bit. Might as well merge it while at it to make it more usable as we're using this to test the multi-omap booting between V6 and V7 ARMs. Also, anybody using n8x0 with a current kernel will most likely want to mount root on the MMC instead of the onenand to keep the Maemo install intact. Enable I2C, REGULATOR, MMC, MFD, PM, and USB. Also change the root to /dev/mmcblk0p2 instead of the onenand. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Francisco Alecrim 提交于
Based on Kalle's and Tony's patches. Some variables re-organized and unused code removed. Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NFrancisco Alecrim <francisco.alecrim@openbossa.org> [tony@atomide.com: this is needed to fix the related tusb6010 DMA API changes] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch moves omap_smc1 function to a seperate omap44xx-smc.S file and sets compile flags as -Wa,-march=armv7-a. This fix was suggested by Tony Lindgren <tony@atomide.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> [tony@atomide.com: otherwise multi-omap build with V6 and V7 breaks] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
the early_param() call in board-omap3touchbook.c expands to: static const char __setup_str_early_touchbook_revision[] __section(.init.rodata) _aligned(1) = tbr; [...] and we have a non-const variable being added to the same section: static struct ehci_hcd_omap_platform_data ehci_pdata __section(.init.rodata); because of that, gcc generates a section type conflict which can (and actually should) be avoided by marking const every variable marked with __initconst. This patch fixes that for the ehci_hdc_omap_platform_data. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 10 3月, 2010 1 次提交
-
-
由 Tony Lindgren 提交于
Commit 2b0d8c25 changed ARM to use the common early_param code. Fix compile for Touch Book accordingly. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 3月, 2010 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits) msi-laptop: depends on RFKILL msi-laptop: Detect 3G device exists by standard ec command msi-laptop: Add resume method for set the SCM load again msi-laptop: Support some MSI 3G netbook that is need load SCM msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook Driver core: create lock/unlock functions for struct device sysfs: fix for thinko with sysfs_bin_attr_init() sysfs: Kill unused sysfs_sb variable. sysfs: Pass super_block to sysfs_get_inode driver core: Use sysfs_rename_link in device_rename sysfs: Implement sysfs_rename_link sysfs: Pack sysfs_dirent more tightly. sysfs: Serialize updates to the vfs inode sysfs: windfarm: init sysfs attributes sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes sysfs: Document sysfs_attr_init and sysfs_bin_attr_init sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes sysfs: Use one lockdep class per sysfs attribute. sysfs: Only take active references on attributes. ...
-
- 08 3月, 2010 31 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] i6300esb.c: change platform_driver to pci_driver [WATCHDOG] i6300esb: fix unlock register with [WATCHDOG] drivers/watchdog/wdt.c:wdt_ioctl(): make `ident' non-static [WATCHDOG] change reboot_notifier to platform-shutdown method. [WATCHDOG] watchdog_info constify [WATCHDOG] gef_wdt: Author corrections following split of GE Fanuc joint venture [WATCHDOG] iTCO_wdt: clean up probe(), modify err msg [WATCHDOG] ep93xx: watchdog timer driver for TS-72xx SBCs cleanup [WATCHDOG] support for max63xx watchdog timer chips [WATCHDOG] ep93xx: added platform side support for TS-72xx WDT driver [WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits) ALSA: hdmi - show debug message on changing audio infoframe ALSA: hdmi - merge common code for intelhdmi and nvhdmi ALSA: hda - Add ASRock mobo to MSI blacklist ALSA: hda: uninitialized variable fix ALSA: hda: Use LPIB for a Biostar Microtech board ALSA: usb/audio.h: Fix field order ALSA: fix jazz16 compile (udelay) ALSA: hda: Use LPIB for Dell Latitude 131L ALSA: hda - Build hda_eld into snd-hda-codec module ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio ALSA: hda - Support max codecs to 8 for nvidia hda controller ALSA: riptide: clean up while loop ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line ALSA: timer - pass real event in snd_timer_notify1() to instance callback ALSA: oxygen: change || to && ALSA: opti92x: use PnP data to select Master Control port ASoC: fix ak4104 register array access ASoC: soc_pcm_open: Add missing bailout tag ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam ALSA: ua101: removing debugging code ...
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents [S390] smsgiucv: declare char pointers as "const" [S390] dasd: automatic recognition of read-only devices [S390] remove unused qdio flags in zfcp and qeth [S390] Cleanup xtime usage [S390] qdio: add missing bracket [S390] cio: fix init_count in case of recognition after steal lock [S390] dasd: security and PSF update patch for EMC CKD ioctl [S390] hvc_iucv: allocate memory buffers for IUCV in zone DMA [S390] uaccess: make sure copy_from_user_overflow is builtin
-
由 Christian Kujau 提交于
Remove the EXPERIMENTAL flag from FS-Cache so that Ubuntu can make use of the facility. Signed-off-by: NChristian Kujau <lists@nerdbynature.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wim Van Sebroeck 提交于
Since the intel 6300esb platform uses a dedicated PCI ID for it's watchdog timer (00:1d.4), it's better and easier to have this as a pci_driver. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Hendrik Brueckner 提交于
The smsgiucv_app driver registers a callback with the smsgiucv driver to receive z/VM CP special messages (SMSG) starting with "APP". When the callback is called for special messages, the driver creates an uevent for the received message. The uevent consists of additional environment data containing the message prefix ("APP"), message sender, and message content. udev rules can be used to trigger application specific actions through matching the content or sender of the special message. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Declare the smsgiucv prefix char pointer as "const" and use use const char pointers in callback functions. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Weinhuber 提交于
In z/VM it is possible to attach a device as read-only. To prevent unintentional write requests and subsequent I/O errors, we can detect this configuration using the z/VM DIAG 210 interface and set the respective linux block device to read-only as well. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ursula Braun 提交于
zfcp and qeth are setting flags for the qdio-layer, but these flags are not used in qdio. Patch removes the flag definitions from qdio and their settings in zfcp and qeth. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 John Stultz 提交于
This replaces direct xtime usage in the s390 arch with timekeeping accessors, so we can further clean up the timekeeping core. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ursula Braun 提交于
Add a missing bracket to only log the outbound handler event in the appropriate case. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
After we try to steal a lock on a ccw device in boxed state, we have to restart device recognition and potentially reprobing. In this case ccw_device_init_count was erroneously decreased twice. This patch fixes the issue. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Nigel Hislop 提交于
Remove the PSF order/suborder check from the Symmetrix CKD dasd ioctl. In exchange restrict the ioctl to CAP_SYS_ADMIN and CAP_SYS_RAWIO. Signed-off-by: NNigel Hislop <hislop_nigel@emc.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
The device driver must allocate memory for IUCV buffers with GFP_DMA, because IUCV cannot address memory above 2GB (31bit addresses only). Because the IUCV ignores the higher bits of the address, sending and receiving IUCV data with this driver might cause memory corruptions. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If there is no in kernel image caller modules will suffer: ERROR: "copy_from_user_overflow" [net/core/pktgen.ko] undefined! ERROR: "copy_from_user_overflow" [net/can/can-raw.ko] undefined! ERROR: "copy_from_user_overflow" [fs/cifs/cifs.ko] undefined! Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Wim Van Sebroeck 提交于
Before you can read or write from the i6300esb memeory mapped registers, you need to unlock these. This is done by writing the magic numbers 0x80 and 0x86 to the reload register. The size of the reload register is 32bit though. Also binary 11 is hex 0x03 and not 0x11. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Wu Fengguang 提交于
Also change printk level for the two others. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi. For now the patch_hdmi.c file is simply included by patch_intelhdmi.c and patch_nvhdmi.c, and does not represent a real codec. There are no behavior changes to intelhdmi. However nvhdmi made several changes when copying code out of intelhdmi, which are all reverted in this patch. Wei Ni confirmed that the reverted code actually works fine. Tested-by: NWei Ni <wni@nvidia.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
msi-laptop uses rfkill*() interfaces so it should depend on RFKILL. msi-laptop.c:(.text+0x1fcd1b): undefined reference to `rfkill_alloc' msi-laptop.c:(.text+0x1fcd76): undefined reference to `rfkill_register' msi-laptop.c:(.text+0x1fcdc8): undefined reference to `rfkill_destroy' msi-laptop.c:(.text+0x1fcdd9): undefined reference to `rfkill_unregister' This repairs "msi-laptop: Detect 3G device exists by standard ec command", which is in some gregkh tree. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee, Chun-Yi 提交于
Detect 3G device exists by standard ec command. Driver will not create the threeg sysfs file and threeg rfkill interface if there have no internal 3G device in MSI notebook/netbook. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee, Chun-Yi 提交于
Implement the resume method for set the load SCM flag after system reusme. Without this patch, the wifi function key on SCM model will back to BIOS control mode then confuse with the userland software control. e.g. MSI N034 Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee, Chun-Yi 提交于
Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G, those netbook will load the SCM (windows app) to disable the original Wlan/Bluetooth control by BIOS when user press fn key, then control Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user cann't on/off 3G module on those 3G netbook. On Linux, msi-laptop driver will do the same thing to disable the original BIOS control, then might need use HAL or other userland application to do the software control that simulate with SCM. e.g. MSI N034 netbook Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee, Chun-Yi 提交于
Add threeg sysfs file for support query 3G state by standard 66/62 ec command, the MSI standard ec interface supported this feature. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee, Chun-Yi 提交于
Suppport standard ec 66/62 command on MSI notebook and nebook. MSI netbook and notebook already support 66/62 command, so, add new get_state function, and put the old model to non-standard model, but driver still support those old model. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Rothwell 提交于
After merging the final tree, today's linux-next build (powerpc allyesconfig) failed like this: drivers/pci/pci-sysfs.c: In function 'pci_create_legacy_files': drivers/pci/pci-sysfs.c:645: error: lvalue required as unary '&' operand drivers/pci/pci-sysfs.c:658: error: lvalue required as unary '&' operand Caused by commit "sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes" interacting with commit "sysfs: Use one lockdep class per sysfs attribute") both from the driver-core tree. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
Now that there are no more users we can remove the sysfs_sb variable. Acked-by: NTejun Heo <tj@kernel.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
Currently sysfs_get_inode magically returns an inode on sysfs_sb. Make the super_block parameter explicit and the code becomes clearer. Acked-by: NTejun Heo <tj@kernel.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-