While splitting up workqueue initialization into two parts,
ac8f73400782 ("workqueue: make workqueue available early during boot")
put wq_numa_init() into workqueue_init_early().  Unfortunately, on
some archs including power and arm64, cpu to node mapping isn't yet
established by the time the early init is called leading to incorrect
NUMA initialization and subsequently the following oops due to zero
cpumask on node-specific unbound pools.

  Unable to handle kernel paging request for data at address 0x00000038
  Faulting instruction address: 0xc0000000000fc0cc
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-compiler_gcc-6.2.0-next-20161005 #94
  task: c0000007f5400000 task.stack: c000001ffc084000
  NIP: c0000000000fc0cc LR: c0000000000ed928 CTR: c0000000000fbfd0
  REGS: c000001ffc087780 TRAP: 0300   Not tainted  (4.8.0-compiler_gcc-6.2.0-next-20161005)
  MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 48000424  XER: 00000000
  CFAR: c0000000000089dc DAR: 0000000000000038 DSISR: 40000000 SOFTE: 0
  GPR00: c0000000000ed928 c000001ffc087a00 c000000000e63200 c000000010d6d600
  GPR04: c0000007f5409200 0000000000000021 000000000748e08c 000000000000001f
  GPR08: 0000000000000000 0000000000000021 000000000748f1f8 0000000000000000
  GPR12: 0000000028000422 c00000000fb80000 c00000000000e0c8 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000021 0000000000000001
  GPR20: ffffffffafb50401 0000000000000000 c000000010d6d600 000000000000ba7e
  GPR24: 000000000000ba7e c000000000d8bc58 afb504000afb5041 0000000000000001
  GPR28: 0000000000000000 0000000000000004 c0000007f5409280 0000000000000000
  NIP [c0000000000fc0cc] enqueue_task_fair+0xfc/0x18b0
  LR [c0000000000ed928] activate_task+0x78/0xe0
  Call Trace:
  [c000001ffc087a00] [c0000007f5409200] 0xc0000007f5409200 (unreliable)
  [c000001ffc087b10] [c0000000000ed928] activate_task+0x78/0xe0
  [c000001ffc087b50] [c0000000000ede58] ttwu_do_activate+0x68/0xc0
  [c000001ffc087b90] [c0000000000ef1b8] try_to_wake_up+0x208/0x4f0
  [c000001ffc087c10] [c0000000000d3484] create_worker+0x144/0x250
  [c000001ffc087cb0] [c000000000cd72d0] workqueue_init+0x124/0x150
  [c000001ffc087d00] [c000000000cc0e74] kernel_init_freeable+0x158/0x360
  [c000001ffc087dc0] [c00000000000e0e4] kernel_init+0x24/0x160
  [c000001ffc087e30] [c00000000000bfa0] ret_from_kernel_thread+0x5c/0xbc
  Instruction dump:
  62940401 3b800000 3aa00000 7f17c378 3a600001 3b600001 60000000 60000000
  60420000 72490021 ebfe0150 2f890001 <ebbf0038> 419e0de0 7fbee840 419e0e58
  ---[ end trace 0000000000000000 ]---

Fix it by moving wq_numa_init() to workqueue_init().  As this means
that the early intialization may not have full NUMA info for per-cpu
pools and ignores NUMA affinity for unbound pools, fix them up from
workqueue_init() after wq_numa_init().
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/87twck5wqo.fsf@concordia.ellerman.id.au
Fixes: ac8f73400782 ("workqueue: make workqueue available early during boot")
Signed-off-by: NTejun Heo <tj@kernel.org>

keventd_up() no longer has in-kernel users.  Remove it and make
wq_online static.
Signed-off-by: NTejun Heo <tj@kernel.org>

Now that workqueue can handle work item queueing from very early
during boot, there is no need to gate schedule_work() while
!keventd_up().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>

Now that workqueue can handle work item queueing from very early
during boot, there is no need to gate schedule_delayed_work_on() while
!keventd_up().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org

Now that workqueue can handle work item queueing/cancelling from very
early during boot, there is no need to gate cancel_delayed_work_sync()
while !keventd_up().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Qiao Zhou <qiaozhou@asrmicro.com>

Now that workqueue can handle work item queueing from very early
during boot, there is no need to delay schedule_work() while
!keventd_up().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>

Now that workqueue can handle work item queueing from very early
during boot, there is no need to gate schedule_work() with
keventd_up().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: linux-edac@vger.kernel.org

Workqueue is currently initialized in an early init call; however,
there are cases where early boot code has to be split and reordered to
come after workqueue initialization or the same code path which makes
use of workqueues is used both before workqueue initailization and
after.  The latter cases have to gate workqueue usages with
keventd_up() tests, which is nasty and easy to get wrong.

Workqueue usages have become widespread and it'd be a lot more
convenient if it can be used very early from boot.  This patch splits
workqueue initialization into two steps.  workqueue_init_early() which
sets up the basic data structures so that workqueues can be created
and work items queued, and workqueue_init() which actually brings up
workqueues online and starts executing queued work items.  The former
step can be done very early during boot once memory allocation,
cpumasks and idr are initialized.  The latter right after kthreads
become available.

This allows work item queueing and canceling from very early boot
which is what most of these use cases want.

* As systemd_wq being initialized doesn't indicate that workqueue is
  fully online anymore, update keventd_up() to test wq_online instead.
  The follow-up patches will get rid of all its usages and the
  function itself.

* Flushing doesn't make sense before workqueue is fully initialized.
  The flush functions trigger WARN and return immediately before fully
  online.

* Work items are never in-flight before fully online.  Canceling can
  always succeed by skipping the flush step.

* Some code paths can no longer assume to be called with irq enabled
  as irq is disabled during early boot.  Use irqsave/restore
  operations instead.

v2: Watchdog init, which requires timer to be running, moved from
    workqueue_init_early() to workqueue_init().
Signed-off-by: NTejun Heo <tj@kernel.org>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CA+55aFx0vPuMuxn00rBSM192n-Du5uxy+4AvKa0SBSOVJeuCGg@mail.gmail.com

destroy_workqueue() performs a number of sanity checks to ensure that
the workqueue is empty before proceeding with destruction.  However,
it's not always easy to tell what's going on just from the warning
message.  Let's dump workqueue state after sanity check failures to
help debugging.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/CACT4Y+Zs6vkjHo9qHb4TrEiz3S4+quvvVQ9VWvj2Mx6pETGb9Q@mail.gmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>

Pull uaccess fixes from Al Viro:
 "Fixes for broken uaccess primitives - mostly lack of proper zeroing
  in copy_from_user()/get_user()/__get_user(), but for several
  architectures there's more (broken clear_user() on frv and
  strncpy_from_user() on hexagon)"

* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  avr32: fix copy_from_user()
  microblaze: fix __get_user()
  microblaze: fix copy_from_user()
  m32r: fix __get_user()
  blackfin: fix copy_from_user()
  sparc32: fix copy_from_user()
  sh: fix copy_from_user()
  sh64: failing __get_user() should zero
  score: fix copy_from_user() and friends
  score: fix __get_user/get_user
  s390: get_user() should zero on failure
  ppc32: fix copy_from_user()
  parisc: fix copy_from_user()
  openrisc: fix copy_from_user()
  nios2: fix __get_user()
  nios2: copy_from_user() should zero the tail of destination
  mn10300: copy_from_user() should zero on access_ok() failure...
  mn10300: failing __get_user() and get_user() should zero
  mips: copy_from_user() must zero the destination on access_ok() failure
  ARC: uaccess: get_user to zero out dest in cause of fault
  ...

Pull xen regression fix from David Vrabel:
 "Fix SMP boot in arm guests"

* tag 'for-linus-4.8b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: fix SMP guests boot

Commit 88e957d6 ("xen: introduce xen_vcpu_id mapping") broke SMP
ARM guests on Xen. When FIFO-based event channels are in use (this is
the default), evtchn_fifo_alloc_control_block() is called on
CPU_UP_PREPARE event and this happens before we set up xen_vcpu_id
mapping in xen_starting_cpu. Temporary fix the issue by setting direct
Linux CPU id <-> Xen vCPU id mapping for all possible CPUs at boot. We
don't currently support kexec/kdump on Xen/ARM so these ids always
match.

In future, we have several ways to solve the issue, e.g.:

- Eliminate all hypercalls from CPU_UP_PREPARE, do them from the
  starting CPU. This can probably be done for both x86 and ARM and, if
  done, will allow us to get Xen's idea of vCPU id from CPUID/MPIDR on
  the starting CPU directly, no messing with ACPI/device tree
  required.

- Save vCPU id information from ACPI/device tree on ARM and use it to
  initialize xen_vcpu_id mapping. This is the same trick we currently
  do on x86.
Reported-by: NJulien Grall <julien.grall@arm.com>
Tested-by: NWei Chen <Wei.Chen@arm.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: NStefano Stabellini <sstabellini@kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler.  Left that way,
zeroing added in inline wrapper.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* should zero on any failure
* __get_user() should use __copy_from_user(), not copy_from_user()

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

should clear on access_ok() failures.  Also remove the useless
range truncation logics.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... that should zero on faults.  Also remove the <censored> helpful
logics wrt range truncation copied from ppc32.  Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

a) should not leave crap on fault
b) should _not_ require access_ok() in any cases.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Al reported potential issue with ARC get_user() as it wasn't clearing
out destination pointer in case of fault due to bad address etc.

Verified using following

| {
|  	u32 bogus1 = 0xdeadbeef;
|	u64 bogus2 = 0xdead;
|	int rc1, rc2;
|
|  	pr_info("Orig values %x %llx\n", bogus1, bogus2);
|	rc1 = get_user(bogus1, (u32 __user *)0x40000000);
|	rc2 = get_user(bogus2, (u64 __user *)0x50000000);
|	pr_info("access %d %d, new values %x %llx\n",
|		rc1, rc2, bogus1, bogus2);
| }

| [ARCLinux]# insmod /mnt/kernel-module/qtn.ko
| Orig values deadbeef dead
| access -14 -14, new values 0 0
Reported-by: NAl Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).

Cc: stable@vger.kernel.org
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It should check access_ok().  Otherwise a bunch of places turn into
trivially exploitable rootholes.

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.

Cc: stable@vger.kernel.org
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

both for access_ok() failures and for faults halfway through

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull x86 fixes from Ingo Molnar:
 "Three fixes:

   - AMD microcode loading fix with randomization

   - an lguest tooling fix

   - and an APIC enumeration boundary condition fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix num_processors value in case of failure
  tools/lguest: Don't bork the terminal in case of wrong args
  x86/microcode/AMD: Fix load of builtin microcode with randomized memory

Pull scheduler fix from Ingo Molnar:
 "A try_to_wake_up() memory ordering race fix causing a busy-loop in
  ttwu()"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix a race between try_to_wake_up() and a woken up task