This helps increasing build testing coverage.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is similar to the Terratec H7. It works with the same az6007 firmware as
the former, however the drx-k firmware of the H7 will NOT work. Hence use
a different firmware name. The firmware does not need to exist as the one in
the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe
some day someone wants to load it (the one from the h5 would work too).
Also since the config entry is now different anyway disable support for rc.
AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment
claims doesn't work anyway) only would handle NEC hence it's pointless creating
a device and polling it if we already know it can't work.
CI is untested.

Originally based on idea found on
http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming
only id needs to be added (but failed to mention it only worked because the
driver couldn't find the h7 drx-k firmware...).
Signed-off-by: NRoland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

In case of error, the function devm_kzalloc() and devm_ioremap()
returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return
value check should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

module_platform_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As value can be initialized with a value lower than zero, change it
to int, to avoid those warnings:

drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_rds_pi_read':
drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  struct bcm2048_device *bdev = dev_get_drvdata(dev);  \
         ^
drivers/staging/media/bcm2048/radio-bcm2048.c:2070:1: note: in expansion of macro 'property_read'
 property_read(rds_pi, unsigned int, "%x")
 ^
drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_fm_rds_flags_read':
drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  struct bcm2048_device *bdev = dev_get_drvdata(dev);  \
         ^
drivers/staging/media/bcm2048/radio-bcm2048.c:2074:1: note: in expansion of macro 'property_read'
 property_read(fm_rds_flags, unsigned int, "%u")
 ^
drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_region_bottom_frequency_read':
drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  struct bcm2048_device *bdev = dev_get_drvdata(dev);  \
         ^
drivers/staging/media/bcm2048/radio-bcm2048.c:2077:1: note: in expansion of macro 'property_read'
 property_read(region_bottom_frequency, unsigned int, "%u")
 ^
drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_region_top_frequency_read':
drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  struct bcm2048_device *bdev = dev_get_drvdata(dev);  \
         ^
drivers/staging/media/bcm2048/radio-bcm2048.c:2078:1: note: in expansion of macro 'property_read'
 property_read(region_top_frequency, unsigned int, "%u")

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Memory exported via remap_pfn_range cannot be remapped via
get_user_pages.
Other videobuf2 methods (like the dma-contig) supports io memory.
This patch adds support for this kind of memory.
v2: Comments by Marek Szyprowski
-Use vb2_get_vma and vb2_put_vma
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

vb2_fop_release does not hold the lock although it is modifying the
queue->owner field.
This could lead to race conditions on the vb2_perform_io function
when multiple applications are accessing the video device via
read/write API:
[ 308.297741] BUG: unable to handle kernel NULL pointer dereference at
0000000000000260
[ 308.297759] IP: [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610
[videobuf2_core]
[ 308.297794] PGD 159719067 PUD 158119067 PMD 0
[ 308.297812] Oops: 0000 #1 SMP
[ 308.297826] Modules linked in: qt5023_video videobuf2_dma_sg
qtec_xform videobuf2_vmalloc videobuf2_memops videobuf2_core
qtec_white qtec_mem gpio_xilinx qtec_cmosis qtec_pcie fglrx(PO)
spi_xilinx spi_bitbang qt5023
[ 308.297888] CPU: 1 PID: 2189 Comm: java Tainted: P O 3.11.0-qtec-standard #1
[ 308.297919] Hardware name: QTechnology QT5022/QT5022, BIOS
PM_2.1.0.309 X64 05/23/2013
[ 308.297952] task: ffff8801564e1690 ti: ffff88014dc02000 task.ti:
ffff88014dc02000
[ 308.297962] RIP: 0010:[<ffffffffa07a9fd2>] [<ffffffffa07a9fd2>]
vb2_perform_fileio+0x372/0x610 [videobuf2_core]
[ 308.297985] RSP: 0018:ffff88014dc03df8 EFLAGS: 00010202
[ 308.297995] RAX: 0000000000000000 RBX: ffff880158a23000 RCX: dead000000100100
[ 308.298003] RDX: 0000000000000000 RSI: dead000000200200 RDI: 0000000000000000
[ 308.298012] RBP: ffff88014dc03e58 R08: 0000000000000000 R09: 0000000000000001
[ 308.298020] R10: ffffea00051e8380 R11: ffff88014dc03fd8 R12: ffff880158a23070
[ 308.298029] R13: ffff8801549040b8 R14: 0000000000198000 R15: 0000000001887e60
[ 308.298040] FS: 00007f65130d5700(0000) GS:ffff88015ed00000(0000)
knlGS:0000000000000000
[ 308.298049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 308.298057] CR2: 0000000000000260 CR3: 0000000159630000 CR4: 00000000000007e0
[ 308.298064] Stack:
[ 308.298071] ffff880156416c00 0000000000198000 0000000000000000
ffff880100000001
[ 308.298087] ffff88014dc03f50 00000000810a79ca 0002000000000001
ffff880154904718
[ 308.298101] ffff880156416c00 0000000000198000 ffff880154904338
ffff88014dc03f50
[ 308.298116] Call Trace:
[ 308.298143] [<ffffffffa07aa3c4>] vb2_read+0x14/0x20 [videobuf2_core]
[ 308.298198] [<ffffffffa07aa494>] vb2_fop_read+0xc4/0x120 [videobuf2_core]
[ 308.298252] [<ffffffff8154ee9e>] v4l2_read+0x7e/0xc0
[ 308.298296] [<ffffffff8116e639>] vfs_read+0xa9/0x160
[ 308.298312] [<ffffffff8116e882>] SyS_read+0x52/0xb0
[ 308.298328] [<ffffffff81784179>] tracesys+0xd0/0xd5
[ 308.298335] Code: e5 d6 ff ff 83 3d be 24 00 00 04 89 c2 4c 8b 45 b0
44 8b 4d b8 0f 8f 20 02 00 00 85 d2 75 32 83 83 78 03 00 00 01 4b 8b
44 c5 48 <8b> 88 60 02 00 00 85 c9 0f 84 b0 00 00 00 8b 40 58 89 c2 41
89
[ 308.298487] RIP [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610
[videobuf2_core]
[ 308.298507] RSP <ffff88014dc03df8>
[ 308.298514] CR2: 0000000000000260
[ 308.298526] ---[ end trace e8f01717c96d1e41 ]---
Signed-off-by: NRicardo Ribalda <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

__qbuf_dmabuf checks whether size of provided dmabuf is large
enough, and it returns error without any log. So this patch adds
error log in the case.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

According to the doc:
If VIDIOC_STREAMON is called when streaming is already in progress,
or if VIDIOC_STREAMOFF is called when streaming is already stopped,
then the ioctl does nothing and 0 is returned.
The current implementation was returning -EINVAL instead.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

num_pages_from_user and buf->num_pages were swapped.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Correct reference of reading values. (rval -> reg_val)
Add the missing unlock before return from function lm3560_get_ctrl()
to avoid deadlock.
Thank you Dan Carpenter & Sakari.
Signed-off-by: NDaniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

internal_csi_format_idx and csi_format_idx are unsigned integers,
therefore they can never be nevative.
CC      drivers/media/i2c/smiapp/smiapp-core.o
In file included from include/linux/err.h:4:0,
                 from include/linux/clk.h:15,
                 from drivers/media/i2c/smiapp/smiapp-core.c:29:
drivers/media/i2c/smiapp/smiapp-core.c: In function ‘smiapp_update_mbus_formats’:
include/linux/kernel.h:669:20: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
 #define min(x, y) ({    \
                    ^
include/linux/compiler.h:153:42: note: in definition of macro ‘unlikely’
 # define unlikely(x) __builtin_expect(!!(x), 0)
                                          ^
drivers/media/i2c/smiapp/smiapp-core.c:402:2: note: in expansion of macro ‘BUG_ON’
  BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
  ^
drivers/media/i2c/smiapp/smiapp-core.c:402:9: note: in expansion of macro ‘min’
  BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
         ^
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Describe the tasks to be done for this driver to be promoted to a
non-staging one.

[m.chehab@samsung.com: Add a patch description; add a note about the
 CodingStyle issues and make sure that the README lines are not bigger
 than 80 cols.]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add suport for Nokia N900 radio. This driver is far from being ready
to be added at the main tree, as it creates its own sysfs interface,
and violates lots of Coding Style rules, doing even evil things like
returning from a function inside a macro.

So, it is being added at staging with the condition that it will be
soon be fixed.

[m.chehab@samsung.com: added a description for the patch]
Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: NNils Faerber <nils.faerber@kernelconcepts.de>
Signed-off-by: NJoni Lapilainen <joni.lapilainen@gmail.com>
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: moved to staging, added slab.h include]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch should fix/enhance the set_voltage function for
the cx24117 demodulator.
Signed-off-by: NLuis Alves <ljalvs@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds the complete list of all the commands known
for the cx24117 demodulator.
Signed-off-by: NLuis Alves <ljalvs@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The fimc_is_hw_wait_intsr0_intsd0() function is currently unused and
can be safely removed. The other polling function simplified and ETIME
error code is replaced with more commonly used ETIMEDOUT.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In case no valid pixelcode is found, an i of -1 after the loop is out of
bounds for the array.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This define is only used in s5pcsis_irq_handler():
	if ((status & S5PCSIS_INTSRC_NON_IMAGE_DATA) && pktbuf->data) {
The problem is that "status" is a 32 bit and (0xff << 28) is larger than
32 bits and that sets off a static checker warning.  I consulted with
Sylwester Nawrocki and the define should actually be (0xf << 28).
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace clk_enable() by clock_enable_prepare() and clk_disable()
with clk_disable_unprepare(). clk_{prepare/unprepare} calls are
required by common clock framework and this driver was missed while
converting all users of the Samsung original clocks driver to its
new implementation based on the common clock API.
Signed-off-by: NMateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
[s.nawrocki@samsung.com: edited commit description]
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace clk_enable() by clock_enable_prepare() and clk_disable()
with clk_disable_unprepare(). clk_{prepare/unprepare} calls are
required by common clock framework and this driver was missed while
converting all users of the Samsung original clocks driver to its
new implementation based on the common clock API.
Signed-off-by: NMateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[s.nawrocki@samsung.com: edited commit description]
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Restore vpll clock rate if start stream fail or stream is off.
Signed-off-by: NMateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[s.nawrocki@samsung.com: fixed whitespace error reported by checkpath.pl]
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplify the driver by using the m2m ioctl and vb2 helpers.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplify the driver by using the m2m ioctl and vb2 helpers.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplify the FIMC mem-to-mem driver by using the m2m ioctl
and vb2 helpers.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplify the driver by using the m2m ioctl and vb2 helpers.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds ioctl helpers to the V4L2 mem-to-mem API, so we can avoid
several ioctl handlers in the mem-to-mem video node drivers that are simply
a pass-through to the v4l2_m2m_* calls. These helpers will only be useful
for drivers that use same mutex for both OUTPUT and CAPTURE queue, which
is the case for all currently in tree v4l2 m2m drivers. In order to use
the helpers the drivers are required to use struct v4l2_fh.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The configuration of many other blocks depend on resizer maximum data rate.
Get the value from resizer at link validation time.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Mark pads that must be connected.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not
connected by an active link.
This patch makes it possible to avoid drivers having to check for the most
common case of link state validation: a sink pad that must be connected.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Pads that set this flag must be connected by an active link for the entity
to stream.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The ioctl is (at least currently) mandatory.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The pad::get_fmt call must be protected by a mutex, but preparing its
arguments doesn't need to be. Move the non-critical code out of the
mutex-protected section.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Translating -ENOIOCTLCMD to -EINVAL is invalid, the correct ioctl return
value is -ENOTTY.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The remote subdev of any video node in the OMAP4 ISS is an internal
subdev that is guaranteed to implement get_fmt. Don't check the return
value for -ENOIOCTLCMD, as this can't happen.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Get rid of a goto statement for a simple error path that can be inlined,
and split spaghetti error code to a separate section.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The iss_device structure is allocated with kzalloc, there's no need to
initialize its fields to 0 explicitly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Loop counters that can only take positive values should be unsigned.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The functions always succeed, there's no need to return an error value.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>