DISPC requires the x resolution to be divisible by 8 when stall mode is
not used.

Add a check to the DPI driver to verify this.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Now that interlace support has been added, we can remove the check that
prevents interlace.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Add the missing bits for interlace:

* Set VBLANK_OSC if the videomode's vblank is fractional
* Halve the vertical timings for interlace
* Double the horizontal timings for double-pixel mode
* Set FC_PRCONF properly for double-pixel mode
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The HDMI driver copies the timing values one by one. Instead we can just
copy the whole struct.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

For some reason the HDMI FC's HSW value is programmed to hsw-1. There's
no indication in the documentation that this would be correct, and no
other blanking value needs -1 either.

So remove the -1.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Interlace field order is different between VENC and HDMI. The driver
currently sets the field order for VENC.

This patch adds the code to set the field order for HDMI.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The HDMI WP timings are not programmed correctly for interlace.

We need to halve the vertical timings when interlace is used, and double
the horizontal timings when pixel doubling is used.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

On OMAP4 and OMAP5 ES1.0 the HDMI_WP_VIDEO_TIMING_H:HSW field is
set directly to the HSW value. On later SoCs the field needs to be
programmed with the value of HSW-1.

Currently the driver always programs the field with the HSW value. Most
videomodes seem to work fine with that, but at least low resolution
interlaced modes don't work at all.

This patch fixes the HSW for OMAP5 ES2.0+ SoCs.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to HDMI to double the pixel clock when
double-pixel mode is used.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to omapdrm to output double-pixel mode.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to DISPC to output double-pixel mode.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

omap_crtc_wait_pending() waits until the config changes have been taken
into use, usually at next vblank. The wait-timeout used is 50ms, which
usually is enough, but in some rare cases not.

As time wait-timeout is just a safety measure for cases where something
is broken, we can just as well increase the timeout considerably.

This patch makes the timeout 250ms.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

We no longer have the omapdrm plugin system for SGX, and we can thus
remove the support for external memory and sync objects from omap_gem.c.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

OMAP GEM objects backed by dma_buf reuse the current OMAP GEM object
support as much as possible. If the imported buffer is physically
contiguous its physical address will be used directly, reusing the
OMAP_BO_MEM_DMA_API code paths. Otherwise it will be mapped through the
TILER using a pages list created from the scatterlist instead of the
shmem backing storage.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Split the individual steps of GEM object allocation and initialization
clearly. This improves readability and prepares for dma_buf import
support.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The driver assumes that only objects backed by shmem need to be mapped
through DMM. While this is true with the current code, the assumption
won't hold with dma_buf import support.

Condition the mapping based on whether the buffer has been allocated
using the DMA mapping API instead and clean up the flags to avoid having
to check both flags and GEM object filp field to decide how to process
buffers. Flags are not the authoritative source of information regarding
where the buffer memory comes from, and are renamed to make that
clearer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If the panel's enable fails, omap_encoder silently ignores the failure.
omapdrm should really handle the failure, but unfortunately the whole
encoder enable codepath is expected to always succeed.

So for now, catch the enable failure and print an error.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

omap_gem_dma_sync() calls dma_map_page() but does not check the possible
error with dma_mapping_error(). If DMA-API debugging is enabled, the
debug layer will give a warning if dma_mapping_error() has not been
used.

This patch adds proper error handling to omap_gem_dma_sync().
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

omap_gem_attach_pages() calls dma_map_page() but does not check the
possible error with dma_mapping_error(). If DMA-API debugging is
enabled, the debug layer will give a warning if dma_mapping_error() has
not been used.

This patch adds proper error handling to omap_gem_attach_pages().
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

tpd12s015 HW has LS_OE, CT_CP_HPD and HPD gpios. Out of these gpios,
driver only handled LS_OE as optional. The CT_CP_HPD gpio should also
be treated as optional gpio as it is just a power saving feature. Some
boards hardwire this gpio to be always enable. In this patch, all access
to CT_CP_HPD gpio is made optional.
Signed-off-by: NManisha Agrawal <manisha.agrawal@ti.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Migrated the gpio APIs to descriptor-interface based.
Signed-off-by: NManisha Agrawal <manisha.agrawal@ti.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

All devices using tpd12s015 driver are doing DT boot. No need of further
supporting the platform data. This patch removes support for platform
data.
Signed-off-by: NManisha Agrawal <manisha.agrawal@ti.com>
[tomi.valkeinen@ti.com: minor adjustments]
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

drm_atomic_get_plane_state() may return ERR_PTR. Handle
drm_atomic_get_plane_state() return values right in
omap_crtc_atomic_set_property().
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

This patch adds wrapper functions for readl() and writel(), dmm_read()
and dmm_write(), so that we can implement workaround for DRA7 errata
i878.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The current driver uses non-blocking DMM fill when releasing memory.
This gives us a small performance increase as we don't have to wait for
the fill operation to finish.

However, the driver does not have any error handling for non-blocking
fill. In case of an error, the fill operation may silently fail, leading
to leaking DMM engines, which may eventually lead to deadlock if we run
out of DMM engines.

This patch makes the DMM driver always use blocking fills, so that we
can catch the errors. A more complex option would be to allow
non-blocking fills, and implement proper error handling, but that is
left for the future.

This patch is a HACK, as the proper fix is to either decide to always
use sync fills and remove all the async related code, or fix the async
code.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

We occasionally see DISPC sync-lost errors when enabling and disabling
HDMI. Sometimes we get only a few, which get handled (ignored) by the
driver, but sometimes there's a flood of the errors which doesn't seem
to stop.

The HW team has root caused this to the order in which HDMI and DISPC
are enabled/disabled. Currently we enable HDMI first, and then DISPC,
and vice versa when disabling. HW team's suggestion is to do it the
other way around.

This patch changes the order, but this has two side effects as the pixel
clock is produced by HDMI, and the clock is not running when we
enable/disable DISPC:

* When enabling DISPC first, we don't get vertical sync events
* When disabling DISPC last, we don't get FRAMEDONE event

At the moment we use both of those to verify that DISPC has been
enabled/disabled properly. Thus this patch also needs to change the
omapdrm and omapdss which handle the DISPC side.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Convert the raw unsigned long 'pfn' argument to pfn_t for the purpose of
evaluating the PFN_MAP and PFN_DEV flags.  When both are set it triggers
_PAGE_DEVMAP to be set in the resulting pte.

There are no functional changes to the gpu drivers as a result of this
conversion.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

omap_encoder_update() assigns an overlay manager to
dssdev->src->manager. This assignment is not needed, as the connections
in the display chain have already been made at connect step.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm supports atomic modesetting, and it seems to work ok. So let's
set the flag to enable the atomic modesetting API support.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Remove unused defines related to SGX plugin which are not used.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Modified Tiler placement to utilize bitmaps for bookkeeping and
all placement algorithms.  This resulted in a substantial savings
in time for all Tiler reservation and free operations.  Typical
savings are in the range of 28% decrease in time taken with larger
buffers showing a 80%+ decrease.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The GEM object can't be tiled without a usergart as that condition is
checked and considered as an error when creating the GEM object.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The goto error statement end up just returning NULL without performing
any cleanup, replace it with a direct return.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The drm_gem_free_mmap_offset() call in omap_gem_free_object() is
redundant as the same function is called from drm_gem_object_release().
Remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Use the omap_gem_free_object() function to destroy the GEM object in the
omap_gem_new_handle() error path instead of doing it manually (and
incorrectly).
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The GEM object free handler frees memory allocated by the driver using
the pointer to the drm_gem_object instead of the pointer to the
omap_gem_object that embeds it. This doesn't cause any issue in practice
as the drm_gem_object is the first field of omap_gem_object, but would
cause memory corruption if the structure layout changes. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The 8 high order bits of the buffer flags are reserved for internal use.
Mask them out from the flags passed by userspace.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The structure contains data related to a device instance, it shouldn't
be a global variable.

While at it rename the usergart structures with an omap_drm_ prefix.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Divide the GEM implementation in groups of functions to improve
readability.

No code change is performed by this commit.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Reorder functions to get rid of forward declarations
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>